stm8s_tim1.c中的子函数无法调用

flavin · 发表于 2016-8-15 23:23:16

配置TIM1中的PWM模式时，stm8s_tim1.c中配置寄存器的子函数无法调用，先声明，我已经加了stm8s_lib.h文件，并且 stm8s_conf.h文件也定义了TIM1，但是结果如题！求大神解答！//---------------stm8s_lib.h文件------------------
#ifdef _TIM1
#include "stm8s_tim1.h"
#endif /* _TIM1 */

#ifdef _TIM2
#include "stm8s_tim2.h"
#endif /* _TIM2 */

//---------------stm8s_conf.h文件------------------
/*** TIMERs *******************************************************************/
#define _TIM1 (1)
#define _TIM2 (1)
#define _TIM3 (1)
#define _TIM4 (1)

//---------------drvTimer.h文件------------------
#include "stm8s_lib.h"
#include "system_function.h"
//#include "stm8s_tim1.c"
//----- Initialization for TIM1 and Its PWM
void InitTim1()
{
TIM1_DeInit();

//----- Configure TIM1->EGR |= 0x01; 重新初始化TIM1
TIM1_GenerateEvent(TIM1_EVENTSOURCE_UPDATE);
//----- Configure TIM1->CR1
TIM1_ARRPreloadConfig( DISABLE ); //Configure TIM1->CR1[7]:自动重新加载允许位
TIM1_CounterModeConfig( TIM1_COUNTERMODE_UP ); //Configure TIM1->CR1[6:4]:边沿对齐的向上计数
TIM1_SelectOnePulseMode( TIM1_OPMODE_REPETITIVE ); //Configure TIM1->CR1[3]:单脉冲模式计数器不停止
TIM1_UpdateRequestConfig( TIM2_UPDATESOURCE_GLOBAL ); //Configure TIM1->CR1[2]:更新请求源
TIM1_UpdateDisableConfig( DISABLE ); //Configure TIM1->CR1[1]:允许更新
//----- Configure CNTH CNTL
TIM1_SetCounter(0x0000);
//----- Configure PWM Freq: (100kHz = 16M/160,10us)
TIM1_TimeBaseInit(TIM2_PRESCALER_1,TIM1_COUNTERMODE_UP,TIM1_PWM_DIV,0x00);
//----- Configure TIM1->CCER2[1,0], TIM1->CCMR3, TIM1->OISR, TIM1->CCR3H/L

WM Duty: 95%
TIM1_OC3Init(TIM1_OCMODE_PWM1, TIM1_OUTPUTSTATE_ENABLE, TIM1_OUTPUTNSTATE_DISABLE, TIM1_PWM_DUTY_UPLIMIT,
TIM1_OCPOLARITY_HIGH, TIM1_OCNPOLARITY_LOW, TIM1_OCIDLESTATE_RESET, TIM1_OCNIDLESTATE_RESET);

//----- Configure TIM1->DTR, TIM1->BKR
TIM1_BDTRConfig(TIM1_OSSISTATE_DISABLE, TIM1_LOCKLEVEL_OFF, 0x00, TIM1_BREAK_DISABLE,TIM1_BREAKPOLARITY_LOW,
               TIM1_AUTOMATICOUTPUT_DISABLE);

TIM1_ITConfig( TIM1_IT_CC3, ENABLE);
  TIM1_Cmd(ENABLE);
}

提示的错误：
Running Linker
clnk -l"C:\Program Files\COSMIC\CXSTM8_EVAL\Lib"  -o Debug\tx.sm8 -mDebug\tx.map Debug\tx.lkf
#error clnk Debug\tx.lkf:1 symbol _TIM1_SetCounter not defined (Debug\drvtimer.o )
#error clnk Debug\tx.lkf:1 symbol _TIM1_GenerateEvent not defined (Debug\drvtimer.o )
#error clnk Debug\tx.lkf:1 symbol _TIM1_SelectOnePulseMode not defined (Debug\drvtimer.o )
#error clnk Debug\tx.lkf:1 symbol _TIM1_Cmd not defined (Debug\drvtimer.o )
#error clnk Debug\tx.lkf:1 symbol _TIM1_DeInit not defined (Debug\drvtimer.o )
#error clnk Debug\tx.lkf:1 symbol _TIM1_OC3Init not defined (Debug\drvtimer.o )