STM32F769NI 怎么下载官方演示例程到板上，有大神知道吗？

weishi

STM32F769NI 怎么下载官方演示例程到板上，有大神知道吗？
Partial Programming Done (areas with no algorithms skipped!)
到手快一个月了，不知该如何设置，请大神们不吝赐教！！！

weishi

已解决

zuoyi

不知道怎么解决的

weishi

zuoyi 发表于 2016-8-3 15:24
不知道怎么解决的

In order to program the demonstration you must do the following:
1- Open STM32 ST-Link Utility V3.9, click on "External Loader" from the bar menu then check
   "MX25L512G_STM32F769I-DISCO" box
2- Connect the STM32F769I-DISCO board to PC with USB cable through CN16
3- Use "STM32CubeDemo_STM32769I-DISCO_V1.0.1.hex" file provided under 揃inary?with STM32 ST-Link Utility
   to program both internal Flash and external QSPI memory
4- copy the audio and video files provided under "Utilities/Media/" in the USB key
5- Plug a USB micro A-Male to A-Female cable on CN15 connector
-> The internal Flash and the external QSPI are now programmed and the demonstration is shown on the board.

czdspeed

楼主我问一下，你的官方769开发板是哪里买到的。我这边在找两条SAI总线的芯片，发现F769正好合适。另外问下这个官方的demo程序是哪里下的。我在主页上没有找到。万分感谢。