STM32 UART DMA FIFO

jsgyzj

有没有做过STM32 UART DMA FIFO？本人菜鸟最近在弄这个，有什么相关资料可以推荐的么，大原子哥在么

正点原子

没有，帮顶

dichi

FIFO 可以参考一些优秀的开源系统

dichi

[mw_shl_code=applescript,true]struct rt_ringbuffer
{
    rt_uint8_t *buffer_ptr;
    /* use the msb of the {read,write}_index as mirror bit. You can see this as
     * if the buffer adds a virtual mirror and the pointers point either to the
     * normal or to the mirrored buffer. If the write_index has the same value
     * with the read_index, but in a different mirror, the buffer is full.
     * While if the write_index and the read_index are the same and within the
     * same mirror, the buffer is empty. The ASCII art of the ringbuffer is:
     *
     *          mirror = 0                    mirror = 1
     * +---+---+---+---+---+---+---+|+~~~+~~~+~~~+~~~+~~~+~~~+~~~+
     * | 0 | 1 | 2 | 3 | 4 | 5 | 6 ||| 0 | 1 | 2 | 3 | 4 | 5 | 6 | Full
     * +---+---+---+---+---+---+---+|+~~~+~~~+~~~+~~~+~~~+~~~+~~~+
     *  read_idx-^                   write_idx-^
     *
     * +---+---+---+---+---+---+---+|+~~~+~~~+~~~+~~~+~~~+~~~+~~~+
     * | 0 | 1 | 2 | 3 | 4 | 5 | 6 ||| 0 | 1 | 2 | 3 | 4 | 5 | 6 | Empty
     * +---+---+---+---+---+---+---+|+~~~+~~~+~~~+~~~+~~~+~~~+~~~+
     * read_idx-^ ^-write_idx
     *
     * The tradeoff is we could only use 32KiB of buffer for 16 bit of index.
     * But it should be enough for most of the cases.
     *
     * Ref: http://en.wikipedia.org/wiki/Circular_buffer#Mirroring */
    rt_uint16_t read_mirror : 1;
    rt_uint16_t read_index : 15;
    rt_uint16_t write_mirror : 1;
    rt_uint16_t write_index : 15;
    /* as we use msb of index as mirror bit, the size should be signed and
     * could only be positive. */
    rt_int16_t buffer_size;
};[/mw_shl_code]

看完上面的 你应该就会了。