求高人解答

fly超凡 · 发表于 2012-8-5 14:00:28

Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...什么意思

sixear · 发表于 2012-8-5 14:17:21

程序已经下载完成，CPU已经开始运行

fly超凡 · 发表于 2012-8-5 14:56:20

那为什么程序在里边没有运行，简单的流水灯都没有运行

fly超凡 · 发表于 2012-8-5 15:06:20

Program Size: Code=3168 RO-data=336 RW-data=72 ZI-data=608
FromELF: creating hex file...
"..\OBJ\NEWDEMO.axf" - 0 Error(s), 1 Warning(s).
Load "..\\OBJ\\NEWDEMO.AXF"
Set JLink

roject File to "I:\MY_LIB3.0\Project\Pro\JLinkSettings.ini"

JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Jul 1 2011 12:02:49
Hardware: V8.00
S/N: 20100214
Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFull

* JLink Info: Could not measure total IR len. TDO is constant high.
**JLink Warning: No matching core found.
* JLink Info: Could not measure total IR len. TDO is constant high.
* JLink Info: Could not measure total IR len. TDO is constant high.
* JLink Info: Resetting target using RESET pin
* JLink Info: Halting CPU core
**JLink Warning: Received 0 as core Id.
***JLink Error: Could not find supported CPU core on JTAG chain
Bad JTAG communication: Write to IR: Expected 0x1, got 0x7 (TAP Command: 2) @ Off 0x5.
Load "..\\OBJ\\NEWDEMO.AXF"
Set JLink

roject File to "I:\MY_LIB3.0\Project\Pro\JLinkSettings.ini"

JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Jul 1 2011 12:02:49
Hardware: V8.00
S/N: 20100214
Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFull

* JLink Info: Could not measure total IR len. TDO is constant high.
**JLink Warning: No matching core found.
* JLink Info: Could not measure total IR len. TDO is constant high.
* JLink Info: Could not measure total IR len. TDO is constant high.
* JLink Info: Resetting target using RESET pin
* JLink Info: Halting CPU core
**JLink Warning: Received 0 as core Id.
***JLink Error: Could not find supported CPU core on JTAG chain
Bad JTAG communication: Write to IR: Expected 0x1, got 0x7 (TAP Command: 2) @ Off 0x5.

fly超凡 · 发表于 2012-8-5 15:06:34

求高人
什么意思

正点原子 · 发表于 2012-8-5 15:54:16

你是不是把B0接在V3.3了?

帐号		自动登录	找回密码
密码			立即注册

求高人解答

原子哥极力推荐 /2