串口发送问题 我有一个串口配置好了 怎么样才能发送自己的名字呢 比如“菜鸟小新”，求大神教教我

小菜鸟ning

#include "stm32f10x.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_tim.h"
#include "stm32f10x_usart.h"
#include "delay.h"
void USART_config(u32 bound)
{
 GPIO_InitTypeDef GPIO_InitStructure; 
 USART_InitTypeDef USART_InitStructure;
 NVIC_InitTypeDef NVIC_InitStructure;
//RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2|RCC_APB2Periph_GPIOA,ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO,ENABLE); //这里一定要配置复用 AFIO
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2 ,ENABLE);
USART_DeInit(USART2);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_InitStructure.GPIO_Mode =GPIO_Mode_AF_PP;    
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
GPIO_InitStructure.GPIO_Mode =GPIO_Mode_IN_FLOATING;    
GPIO_Init(GPIOA, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = bound;
USART_InitStructure.USART_WordLength = USART_WordLength_8b; 
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;  
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
NVIC_InitStructure.NVIC_IRQChannel  = USART2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=3; 
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
USART_Init(USART2, &USART_InitStructure);
USART_Cmd(USART2, ENABLE); 
}
}
void USART2_IRQHandler(void)
{
//u8 RX_dat;  
if(USART_GetITStatus(USART2,USART_IT_RXNE)!=RESET)  //判断发生接收中断
  {
USART_ClearITPendingBit(USART2,  USART_IT_RXNE);   // 清除中断标志
while(USART_GetFlagStatus(USART2, USART_FLAG_RXNE) == RESET) // 等待接收
{
}
//USART_ITConfig(USART2, USART_IT_RXNE, DISABLE);  ///这句话是关闭中断
  }
}
int main(void)
{  
GPIO_Config();
Timer_Config();
NVIC_Config();
SystemInit(); //看英文单词 意思为系统初始化（系统初始化包括时钟）
KEY_Config();
USART_config(9600);
delay_init(72);  
LED(0xff);
  while(1)
 {

USART_SendData(USART2,0x31);

 }
 
 }

zc123

比较简单的办法，不用printf 的话

 char test[]  = "菜鸟小新\r\n";
int i; 
while(1)
 {
    for(i=0; i<sizeof(test); i++)
   {
        USART_SendData(USART2,test);    
   }
   for(i=0; i<10000; i++);
 }