sd卡编译过程错误，求指导

dandelion4277

在编译sd卡程序是出现以下错误，错误程序如下，求各位大侠帮助解决以下，谢谢啦

//发命令到SD卡
void SdCommand(u8 command, u32 argument, u8 CRC)
{

 SdWrite(command|0x40);
 SdWrite(((unsigned char *)&argument)[0]);
 SdWrite(((unsigned char *)&argument)[1]);
 SdWrite(((unsigned char *)&argument)[2]);
 SdWrite(((unsigned char *)&argument)[3]);
 SdWrite(CRC);
}
User\SD.c(64): error:  #79: expected a type specifier
User\SD.c:   void SdCommand(u8 command, uc32 argument, u8 CRC)
User\SD.c:                                                ^
User\SD.c(64): error:  #90: function returning function is not allowed
User\SD.c:   void SdCommand(u8 command, uc32 argument, u8 CRC)
User\SD.c:                                                ^
User\SD.c(64): error:  #141-D: unnamed prototyped parameters not allowed when body is present
User\SD.c:   void SdCommand(u8 command, uc32 argument, u8 CRC)
User\SD.c:        ^
User\SD.c(72): error:  #167: argument of type "CRC_TypeDef *" is incompatible with parameter of type "unsigned char"
User\SD.c:      SdWrite(CRC);
User\SD.c:              ^
User\SD.c(88): error:  #167: argument of type "int" is incompatible with parameter of type "<error-type> (*)(CRC_TypeDef *)"
User\SD.c:      SdCommand(0x00,0,0x95);
User\SD.c:                       ^
User\SD.c(103): error:  #167: argument of type "int" is incompatible with parameter of type "<error-type> (*)(CRC_TypeDef *)"
User\SD.c:      SdCommand(0x01,0x00ffc000,0xff);
User\SD.c:                                ^
User\SD.c(78): warning:  #177-D: variable "delay" was declared but never referenced
User\SD.c:      int delay=0, trials=0;
User\SD.c:          ^
User\SD.c(78): warning:  #177-D: variable "trials" was declared but never referenced
User\SD.c:      int delay=0, trials=0;
User\SD.c:                   ^
User\SD.c(122): error:  #167: argument of type "int" is incompatible with parameter of type "<error-type> (*)(CRC_TypeDef *)"
User\SD.c:      SdCommand(0x18,address,0xff);
User\SD.c:                             ^
User\SD.c(170): error:  #167: argument of type "int" is incompatible with parameter of type "<error-type> (*)(CRC_TypeDef *)"
User\SD.c:      SdCommand(0x11,address,0xff);

正点原子

谁家的代码啊....