关于zynq编译报错fatal error: xparameters.h: No such file or directory

lzqstm

请问为什么我第一次建工程编译没问题，这几天重新建就会出这个报错，教程里面有提到这个报错是添加封装的自定义IP后没改makefile文件导致的，但是我前面的工程没有自定义ip啊，也出这个报错是为什么呢

caojunye

vivado工程里需要在zynq processing ip 的配置界面中勾选gpio外设，然后导出硬件到vitis中，vitis中才会有xgpiops.h的文件

caojunye

报错的界面可以截图看看

lzqstm

caojunye 发表于 2024-1-15 11:31
报错的界面可以截图看看

23:45:14 **** Build of configuration Debug for project axi_gpio ****
make all
make --no-print-directory pre-build
a9-linaro-pre-build-step
' '
make --no-print-directory main-build
'Building file: ../src/main.c'
'Invoking: ARM v7 gcc compiler'
arm-none-eabi-gcc -Wall -O0 -g3 -c -fmessage-length=0 -MT"src/main.o" -mcpu=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard -IE:/FPGA-XILINX-LIBRARY/Vitis/axi_gpio/vitis/system_wrapper/export/system_wrapper/sw/system_wrapper/standalone_ps7_cortexa9_0/bspinclude/include -MMD -MP -MF"src/main.d" -MT"src/main.o" -o "src/main.o" "../src/main.c"
../src/main.c:23:11: fatal error: xgpiops.h: No such file or directory
   23 |  #include "xgpiops.h"
      |           ^~~~~~~~~~~
compilation terminated.
make[1]: *** [src/subdir.mk:23: src/main.o] Error 1
make: *** [makefile:34: all] Error 2

23:45:14 Build Finished (took 700ms)