使用的是stm32mp157的核心板，底板是自己做的，现在需要使用spi3,但是用到的管脚和sdmmc1冲突了。求大神指点。

17883678862

使用的是stm32mp157的核心板，底板是自己做的，现在需要使用spi3,但是用到的管脚和sdmmc1冲突了。于是就把设备树中sdmmc1的是设备节点dsabled掉了，但是现在系统就启动不了？检查发现“root=/dev/mmcblk2p3 rootwait rw console=ttySTM0,115200”这个启动参数有问题。改成“append: root=/dev/mmcblk1p3 rootwait rw console=ttySTM0,115200”后系统还是起不来？C:\Users\asus\Desktop\xadc\1.pngC:\Users\asus\Desktop\xadc\2.png

1. 
   
2. TICE:  CPU: STM32MP157AAA Rev.Z
   
3. NOTICE:  Model: STMicroelectronics STM32MP157D eval daughter
   
4. TICE:  CPU: STM32MP157AAA Rev.Z
   
5. NOTICE:  Model: STMicroelectronics STM32MP157D eval daughter
   
6. INFO:    Reset reason (0x15):
   
7. INFO:      Power-on Reset (rst_por)
   
8. INFO:    Using EMMC
   
9. INFO:      Instance 2
   
10. INFO:    Boot used partition fsbl1
    
11. NOTICE:  BL2: v2.2-r1.0(debug):21665c8
    
12. NOTICE:  BL2: Built : 04:33:16, Sep  7 2022
    
13. INFO:    Using crypto library 'stm32_crypto_lib'
    
14. INFO:    BL2: Doing platform setup
    
15. INFO:    RAM: DDR3-DDR3L 32bits 533000Khz
    
16. INFO:    Memory size = 0x40000000 (1024 MB)
    
17. INFO:    BL2 runs SP_MIN setup
    
18. INFO:    BL2: Loading image id 4
    
19. INFO:    Loading image id=4 at address 0x2ffed000
    
20. INFO:    Image id=4 loaded: 0x2ffed000 - 0x2ffff000
    
21. INFO:    BL2: Loading image id 5
    
22. INFO:    Loading image id=5 at address 0xc0100000
    
23. INFO:    STM32 Image size : 867508
    
24. INFO:    Image id=5 loaded: 0xc0100000 - 0xc01d3cb4
    
25. WARNING: Skip signature check (header option)
    
26. NOTICE:  ROTPK is not deployed on platform. Skipping ROTPK verification.
    
27. NOTICE:  BL2: Booting BL32
    
28. INFO:    Entry point address = 0x2ffed000
    
29. INFO:    SPSR = 0x1d3
    
30. INFO:    Cannot find st,stpmic1 node in DT
    
31. NOTICE:  SP_MIN: v2.2-r1.0(debug):21665c8
    
32. NOTICE:  SP_MIN: Built : 04:33:26, Sep  7 2022
    
33. INFO:    ARM GICv2 driver initialized
    
34. INFO:    stm32mp IWDG1 (12): Secure
    
35. INFO:    ETZPC: CRYP1 (9) could be non secure
    
36. INFO:    SP_MIN: Initializing runtime services
    
37. INFO:    SP_MIN: Preparing exit to normal world
    
38. 
    
39. 
    
40. U-Boot 2020.01-stm32mp-r1 (Sep 26 2023 - 04:42:10 -0700)
    
41. 
    
42. CPU: STM32MP157AAA Rev.Z
    
43. Model: STMicroelectronics STM32MP157D eval daughter
    
44. Board: stm32mp1 in trusted mode (st,stm32mp157d-atk)
    
45. DRAM:  1 GiB
    
46. Clocks:
    
47. - MPU : 650 MHz
    
48. - MCU : 208.878 MHz
    
49. - AXI : 266.500 MHz
    
50. - PER : 24 MHz
    
51. - DDR : 533 MHz
    
52. WDT:   Started with servicing (32s timeout)
    
53. NAND:  0 MiB
    
54. MMC:   STM32 SD/MMC: 0, STM32 SD/MMC: 1
    
55. Loading Environment from MMC... OK
    
56. In:    serial
    
57. Out:   serial
    
58. Err:   serial
    
59. Net:   eth0: ethernet@5800a000
    
60. lcd_id  = 07
    
61. Hit any key to stop autoboot:  0
    
62. Boot over mmc1!
    
63. *** Warning: old environment U-Boot 2020.01-stm32mp-r1 (Dec 30 2022 - 12:24:48 +0800)
    
64. * set default: env default -a; env save; reset
    
65. * update current: env set env_ver ${ver}; env save
    
66. switch to partitions #0, OK
    
67. mmc1(part 0) is current device
    
68. 1228872 bytes read in 59 ms (19.9 MiB/s)
    
69. Scanning mmc 1:2...
    
70. Found /mmc1_extlinux/stm32mp157d-atk_extlinux.conf
    
71. Retrieving file: /mmc1_extlinux/stm32mp157d-atk_extlinux.conf
    
72. 805 bytes read in 33 ms (23.4 KiB/s)
    
73. Select the boot mode
    
74. 1:      stm32mp157d-atk
    
75. 2:      stm32mp157d-atk-hdmi
    
76. 3:      stm32mp157d-atk-spdif
    
77. 4:      stm32mp157d-atk-mipi
    
78. Enter choice: 1:        stm32mp157d-atk
    
79. Retrieving file: /uInitrd
    
80. 3632241 bytes read in 111 ms (31.2 MiB/s)
    
81. Retrieving file: /uImage
    
82. 8381264 bytes read in 215 ms (37.2 MiB/s)
    
83. test label->append: root=/dev/mmcblk2p3 rootwait rw console=ttySTM0,115200
    
84. test_append: root=/dev/mmcblk1p3 rootwait rw console=ttySTM0,115200
    
85. Retrieving file: /stm32mp157d-atk.dtb
    
86. 76060 bytes read in 34 ms (2.1 MiB/s)
    
87. ## Booting kernel from Legacy Image at c2000000 ...
    
88.    Image Name:   Linux-5.4.31
    
89.    Created:      2023-09-26   8:54:16 UTC
    
90.    Image Type:   ARM Linux Kernel Image (uncompressed)
    
91.    Data Size:    8381200 Bytes = 8 MiB
    
92.    Load Address: c2000040
    
93.    Entry Point:  c2000040
    
94.    Verifying Checksum ... OK
    
95. ## Flattened Device Tree blob at c4000000
    
96.    Booting using the fdt blob at 0xc4000000
    
97.    XIP Kernel Image
    
98.    Loading Ramdisk to cfc89000, end cffffc71 ... OK
    
99.    Loading Device Tree to cfc73000, end cfc8891b ... OK
    
100. 
     
101. Starting kernel ...
     
102. 
     
103. [    0.000000] Booting Linux on physical CPU 0x0
     
104. [    0.000000] Linux version 5.4.31 (uisrc@ubuntu) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #5 SMP PREEMPT Tue Sep 26 01:48:14 PDT 2023
     
105. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
     
106. [    0.000000] CPU: div instructions available: patching division code
     
107. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
     
108. [    0.000000] OF: fdt: Machine model: STMicroelectronics STM32MP157C-DK2 Discovery Board
     
109. [    0.000000] Memory policy: Data cache writealloc
     
110. [    0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
     
111. [    0.000000] OF: reserved mem: initialized node mcuram2@10000000, compatible id shared-dma-pool
     
112. [    0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
     
113. [    0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
     
114. [    0.000000] Reserved memory: created DMA memory pool at 0x10041000, size 0 MiB
     
115. [    0.000000] OF: reserved mem: initialized node vdev0vring1@10041000, compatible id shared-dma-pool
     
116. [    0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
     
117. [    0.000000] OF: reserved mem: initialized node vdev0buffer@10042000, compatible id shared-dma-pool
     
118. [    0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
     
119. [    0.000000] OF: reserved mem: initialized node mcuram@30000000, compatible id shared-dma-pool
     
120. [    0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
     
121. [    0.000000] OF: reserved mem: initialized node retram@38000000, compatible id shared-dma-pool
     
122. [    0.000000] cma: Reserved 128 MiB at 0xe8000000
     
123. [    0.000000] psci: probing for conduit method from DT.
     
124. [    0.000000] psci: PSCIv1.1 detected in firmware.
     
125. [    0.000000] psci: Using standard PSCI v0.2 function IDs
     
126. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
     
127. [    0.000000] psci: SMC Calling Convention v1.0
     
128. [    0.000000] percpu: Embedded 20 pages/cpu s50124 r8192 d23604 u81920
     
129. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 227647
     
130. [    0.000000] Kernel command line: root=/dev/mmcblk1p3 rootwait rw console=ttySTM0,115200
     
131. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
     
132. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
     
133. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
     
134. [    0.000000] Memory: 754628K/917500K available (12288K kernel code, 991K rwdata, 3728K rodata, 1024K init, 230K bss, 31800K reserved, 131072K cma-reserved, 131068K highmem)
     
135. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
     
136. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
     
137. [    0.000000] rcu:     RCU event tracing is enabled.
     
138. [    0.000000]  Tasks RCU enabled.
     
139. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
     
140. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
     
141. [    0.000000] random: get_random_bytes called from start_kernel+0x31c/0x4f4 with crng_init=0
     
142. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
     
143. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
     
144. [    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
     
145. [    0.000026] Switching to timer-based delay loop, resolution 41ns
     
146. [    0.001899] Console: colour dummy device 80x30
     
147. [    0.001953] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
     
148. [    0.001974] pid_max: default: 32768 minimum: 301
     
149. [    0.002234] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
     
150. [    0.002260] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
     
151. [    0.003588] CPU: Testing write buffer coherency: ok
     
152. [    0.004122] /cpus/cpu@0 missing clock-frequency property
     
153. [    0.004154] /cpus/cpu@1 missing clock-frequency property
     
154. [    0.004174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
     
155. [    0.059801] Setting up static identity map for 0xc0100000 - 0xc0100060
     
156. [    0.079776] rcu: Hierarchical SRCU implementation.
     
157. [    0.105143] smp: Bringing up secondary CPUs ...
     
158. [    0.180435] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
     
159. [    0.180665] smp: Brought up 1 node, 2 CPUs
     
160. [    0.180688] SMP: Total of 2 processors activated (96.00 BogoMIPS).
     
161. [    0.180698] CPU: All CPU(s) started in SVC mode.
     
162. [    0.181584] devtmpfs: initialized
     
163. [    0.210322] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
     
164. [    0.211019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
     
165. [    0.211054] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
     
166. [    0.217829] pinctrl core: initialized pinctrl subsystem
     
167. [    0.220321] NET: Registered protocol family 16
     
168. [    0.233162] DMA: preallocated 256 KiB pool for atomic coherent allocations
     
169. [    0.235710] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
     
170. [    0.235731] hw-breakpoint: maximum watchpoint size is 8 bytes.
     
171. [    0.236168] Serial: AMBA PL011 UART driver
     
172. [    0.239385] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
     
173. [    0.239438] stm32-pm-domain pm_domain: subdomain core-power-domain registered
     
174. [    0.239456] stm32-pm-domain pm_domain: domains probed
     
175. [    0.293796] reg-fixed-voltage buck1: Fixed regulator specified with variable voltages
     
176. [    0.293838] reg-fixed-voltage: probe of buck1 failed with error -22
     
177. [    0.301864] SCSI subsystem initialized
     
178. [    0.302755] usbcore: registered new interface driver usbfs
     
179. [    0.302849] usbcore: registered new interface driver hub
     
180. [    0.302997] usbcore: registered new device driver usb
     
181. [    0.303411] pps_core: LinuxPPS API ver. 1 registered
     
182. [    0.303423] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email]giometti@linux.it[/email]>
     
183. [    0.303457] PTP clock support registered
     
184. [    0.303861] EDAC MC: Ver: 3.0.0
     
185. [    0.305319] Advanced Linux Sound Architecture Driver Initialized.
     
186. [    0.306240] Bluetooth: Core ver 2.22
     
187. [    0.306324] NET: Registered protocol family 31
     
188. [    0.306336] Bluetooth: HCI device and connection manager initialized
     
189. [    0.306357] Bluetooth: HCI socket layer initialized
     
190. [    0.306373] Bluetooth: L2CAP socket layer initialized
     
191. [    0.306407] Bluetooth: SCO socket layer initialized
     
192. [    0.307348] clocksource: Switched to clocksource arch_sys_counter
     
193. [    1.057919] thermal_sys: Registered thermal governor 'step_wise'
     
194. [    1.058603] NET: Registered protocol family 2
     
195. [    1.059729] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
     
196. [    1.059783] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
     
197. [    1.059894] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
     
198. [    1.060078] TCP: Hash tables configured (established 8192 bind 8192)
     
199. [    1.060253] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
     
200. [    1.060321] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
     
201. [    1.060653] NET: Registered protocol family 1
     
202. [    1.061636] RPC: Registered named UNIX socket transport module.
     
203. [    1.061656] RPC: Registered udp transport module.
     
204. [    1.061666] RPC: Registered tcp transport module.
     
205. [    1.061675] RPC: Registered tcp NFSv4.1 backchannel transport module.
     
206. [    1.062792] Trying to unpack rootfs image as initramfs...
     
207. [    1.447915] Freeing initrd memory: 3548K
     
208. [    1.448722] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
     
209. [    1.451051] Initialise system trusted keyrings
     
210. [    1.451477] workingset: timestamp_bits=14 max_order=18 bucket_order=4
     
211. [    1.463897] squashfs: version 4.0 (2009/01/31) Phillip Lougher
     
212. [    1.465253] NFS: Registering the id_resolver key type
     
213. [    1.465307] Key type id_resolver registered
     
214. [    1.465317] Key type id_legacy registered
     
215. [    1.465340] Installing knfsd (copyright (C) 1996 [email]okir@monad.swb.de[/email]).
     
216. [    1.467159] ntfs: driver 2.1.32 [Flags: R/O].
     
217. [    1.468177] jffs2: version 2.2. (NAND) &#169; 2001-2006 Red Hat, Inc.
     
218. [    1.469028] fuse: init (API version 7.31)
     
219. [    1.530256] NET: Registered protocol family 38
     
220. [    1.530289] Key type asymmetric registered
     
221. [    1.530303] Asymmetric key parser 'x509' registered
     
222. [    1.530414] bounce: pool size: 64 pages
     
223. [    1.530518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
     
224. [    1.530534] io scheduler mq-deadline registered
     
225. [    1.530546] io scheduler kyber registered
     
226. [    1.543688] STM32 USART driver initialized
     
227. [    1.550959] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
     
228. [    1.567672] brd: module loaded
     
229. [    1.582112] loop: module loaded
     
230. [    1.589433] libphy: Fixed MDIO Bus: probed
     
231. [    1.591541] CAN device driver interface
     
232. [    1.594489] PPP generic driver version 2.4.2
     
233. [    1.594852] PPP BSD Compression module registered
     
234. [    1.594868] PPP Deflate Compression module registered
     
235. [    1.594895] PPP MPPE Compression module registered
     
236. [    1.594909] NET: Registered protocol family 24
     
237. [    1.594964] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
     
238. [    1.595067] usbcore: registered new interface driver pegasus
     
239. [    1.595148] usbcore: registered new interface driver asix
     
240. [    1.595208] usbcore: registered new interface driver ax88179_178a
     
241. [    1.595264] usbcore: registered new interface driver cdc_ether
     
242. [    1.595351] usbcore: registered new interface driver smsc75xx
     
243. [    1.595426] usbcore: registered new interface driver smsc95xx
     
244. [    1.595485] usbcore: registered new interface driver net1080
     
245. [    1.595546] usbcore: registered new interface driver cdc_subset
     
246. [    1.595604] usbcore: registered new interface driver zaurus
     
247. [    1.595694] usbcore: registered new interface driver cdc_ncm
     
248. [    1.597678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     
249. [    1.597737] ehci-platform: EHCI generic platform driver
     
250. [    1.598311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     
251. [    1.598358] ohci-platform: OHCI generic platform driver
     
252. [    1.599346] usbcore: registered new interface driver cdc_acm
     
253. [    1.599358] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
     
254. [    1.599472] usbcore: registered new interface driver usb-storage
     
255. [    1.599640] usbcore: registered new interface driver option
     
256. [    1.599692] usbserial: USB Serial support registered for GSM modem (1-port)
     
257. [    1.603169] mousedev: PS/2 mouse device common for all mice
     
258. [    1.605713] i2c /dev entries driver
     
259. [    1.610858] Bluetooth: HCI UART driver ver 2.3
     
260. [    1.610879] Bluetooth: HCI UART protocol H4 registered
     
261. [    1.610927] Bluetooth: HCI UART protocol Three-wire (H5) registered
     
262. [    1.611076] Bluetooth: HCI UART protocol Broadcom registered
     
263. [    1.611167] usbcore: registered new interface driver btusb
     
264. [    1.611908] stm32-cpufreq stm32-cpufreq: Failed to get chip info: -517
     
265. [    1.616171] sdhci: Secure Digital Host Controller Interface driver
     
266. [    1.616186] sdhci: Copyright(c) Pierre Ossman
     
267. [    1.616196] Synopsys Designware Multimedia Card Interface Driver
     
268. [    1.616916] sdhci-pltfm: SDHCI platform and OF driver helper
     
269. [    1.618531] ledtrig-cpu: registered to indicate activity on CPUs
     
270. [    1.621140] usbcore: registered new interface driver usbhid
     
271. [    1.621156] usbhid: USB HID core driver
     
272. [    1.621546] arm-smc-mbox mailbox-0: ARM SMC mailbox enabled.
     
273. [    1.621684] arm-smc-mbox mailbox-1: ARM SMC mailbox enabled.
     
274. [    1.623566] remoteproc remoteproc0: releasing m4
     
275. [    1.627239] Unable to get STM32 DDR PMU clock
     
276. [    1.633400] drop_monitor: Initializing network drop monitor service
     
277. [    1.633768] NET: Registered protocol family 17
     
278. [    1.633803] can: controller area network core (rev 20170425 abi 9)
     
279. [    1.633941] NET: Registered protocol family 29
     
280. [    1.633960] can: raw protocol (rev 20170425)
     
281. [    1.633971] can: broadcast manager protocol (rev 20170425 t)
     
282. [    1.633990] can: netlink gateway (rev 20190810) max_hops=1
     
283. [    1.634505] Bluetooth: RFCOMM TTY layer initialized
     
284. [    1.634551] Bluetooth: RFCOMM socket layer initialized
     
285. [    1.634604] Bluetooth: RFCOMM ver 1.11
     
286. [    1.634942] lib80211: common routines for IEEE802.11 drivers
     
287. [    1.635287] Key type dns_resolver registered
     
288. [    1.635485] ThumbEE CPU extension supported.
     
289. [    1.635514] Registering SWP/SWPB emulation handler
     
290. [    1.635992] registered taskstats version 1
     
291. [    1.636006] Loading compiled-in X.509 certificates
     
292. [    1.661770] ------------[ cut here ]------------
     
293. [    1.661816] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x14c/0x168
     
294. [    1.661827] Modules linked in:
     
295. [    1.661847] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.31 #5
     
296. [    1.661857] Hardware name: STM32 (Device Tree Support)
     
297. [    1.661898] [<c0112518>] (unwind_backtrace) from [<c010d7a0>] (show_stack+0x10/0x14)
     
298. [    1.661920] [<c010d7a0>] (show_stack) from [<c0cbca34>] (dump_stack+0xb0/0xc4)
     
299. [    1.661943] [<c0cbca34>] (dump_stack) from [<c0125a8c>] (__warn+0xd0/0xf8)
     
300. [    1.661965] [<c0125a8c>] (__warn) from [<c0125e34>] (warn_slowpath_fmt+0x64/0xc4)
     
301. [    1.661988] [<c0125e34>] (warn_slowpath_fmt) from [<c0508180>] (pkcs1pad_verify+0x14c/0x168)
     
302. [    1.662011] [<c0508180>] (pkcs1pad_verify) from [<c051d794>] (public_key_verify_signature+0x244/0x2f0)
     
303. [    1.662034] [<c051d794>] (public_key_verify_signature) from [<c051ebb4>] (x509_check_for_self_signed+0xb8/0x118)
     
304. [    1.662055] [<c051ebb4>] (x509_check_for_self_signed) from [<c051dd54>] (x509_cert_parse+0x168/0x1c8)
     
305. [    1.662076] [<c051dd54>] (x509_cert_parse) from [<c051e85c>] (x509_key_preparse+0x10/0x190)
     
306. [    1.662101] [<c051e85c>] (x509_key_preparse) from [<c051c284>] (asymmetric_key_preparse+0x54/0xd4)
     
307. [    1.662127] [<c051c284>] (asymmetric_key_preparse) from [<c04f5340>] (key_create_or_update+0x120/0x418)
     
308. [    1.662153] [<c04f5340>] (key_create_or_update) from [<c11153e0>] (load_system_certificate_list+0xb0/0x108)
     
309. [    1.662178] [<c11153e0>] (load_system_certificate_list) from [<c0102fa8>] (do_one_initcall+0x58/0x2b4)
     
310. [    1.662202] [<c0102fa8>] (do_one_initcall) from [<c1101110>] (kernel_init_freeable+0x1c8/0x264)
     
311. [    1.662226] [<c1101110>] (kernel_init_freeable) from [<c0cd3fd0>] (kernel_init+0x8/0x110)
     
312. [    1.662248] [<c0cd3fd0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
     
313. [    1.662261] Exception stack(0xe689bfb0 to 0xe689bff8)
     
314. [    1.662276] bfa0:                                     00000000 00000000 00000000 00000000
     
315. [    1.662294] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     
316. [    1.662310] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
     
317. [    1.662323] ---[ end trace 93cb2c83ad0d023c ]---
     
318. [    1.662359] Problem loading in-kernel X.509 certificate (-22)
     
319. [    1.680034] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
     
320. [    1.692053] arm-scmi firmware:scmi-0: SCMI Protocol v2.0 'ST:' Firmware version 0x0
     
321. [    1.696709] remoteproc remoteproc0: releasing m4
     
322. [    1.699086] Unable to get STM32 DDR PMU clock
     
323. [    1.716956] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
     
324. [    1.727238] debugfs: Directory 'cpu0' with parent 'opp' already present!
     
325. [    1.736671] remoteproc remoteproc0: releasing m4
     
326. [    1.739346] Unable to get STM32 DDR PMU clock
     
327. [    1.780643] stm32-mdma 58000000.dma: STM32 MDMA driver registered
     
328. [    1.785077] stm32-dma 48000000.dma: STM32 DMA driver registered
     
329. [    1.787297] stm32-dma 48001000.dma: STM32 DMA driver registered
     
330. [    1.788120] reg11: supplied by vdd
     
331. [    1.788563] reg18: supplied by vdd
     
332. [    1.788926] usb33: supplied by regulator-dummy
     
333. [    1.794428] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
     
334. [    1.814566] random: fast init done
     
335. [    1.817778] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
     
336. [    1.818984] random: crng init done
     
337. [    1.820663] debugfs: Directory 'cpu0' with parent 'opp' already present!
     
338. [    1.821624] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-cpufreq-0 failed:-22
     
339. [    1.834582] stm32-crc32 58009000.crc: Initialized
     
340. [    1.836397] stm32-hash 54002000.hash: will run requests pump with realtime priority
     
341. [    1.880154] stm32-hash 54002000.hash: Init HASH done HW ver 23 DMA mode 1
     
342. [    1.882615] remoteproc remoteproc0: releasing m4
     
343. [    1.885101] stm32-ddr-pmu: probed (ID=0x00140061 VER=0x00000010), DDR@533MHz
     
344. [    1.890920] /soc/interrupt-controller@5000d000: bank0
     
345. [    1.890943] /soc/interrupt-controller@5000d000: bank1
     
346. [    1.890955] /soc/interrupt-controller@5000d000: bank2
     
347. [    1.893194] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOA bank added
     
348. [    1.893731] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOB bank added
     
349. [    1.894197] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOC bank added
     
350. [    1.894664] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOD bank added
     
351. [    1.895091] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOE bank added
     
352. [    1.895576] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOF bank added
     
353. [    1.896019] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOG bank added
     
354. [    1.896484] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOH bank added
     
355. [    1.896926] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOI bank added
     
356. [    1.897459] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOJ bank added
     
357. [    1.897981] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOK bank added
     
358. [    1.898292] stm32mp157-pinctrl soc:pin-controller@50002000: Pinctrl STM32 initialized
     
359. [    1.899338] stm32mp157-pinctrl soc:pin-controller-z@54004000: GPIOZ bank added
     
360. [    1.899373] stm32mp157-pinctrl soc:pin-controller-z@54004000: Pinctrl STM32 initialized
     
361. [    1.900819] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
     
362. [    1.903065] stm32-usart 4000f000.serial: interrupt mode for rx (no dma)
     
363. [    1.903091] stm32-usart 4000f000.serial: interrupt mode for tx (no dma)
     
364. [    1.903129] 4000f000.serial: ttySTM1 at MMIO 0x4000f000 (irq = 60, base_baud = 4000000) is a stm32-usart
     
365. [    1.904957] stm32-usart 40010000.serial: interrupt mode for rx (no dma)
     
366. [    1.904979] stm32-usart 40010000.serial: interrupt mode for tx (no dma)
     
367. [    1.905014] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 61, base_baud = 4000000) is a stm32-usart
     
368. [    3.535314] printk: console [ttySTM0] enabled
     
369. [    3.541414] stm32-usart 40011000.serial: interrupt mode for rx (no dma)
     
370. [    3.546593] stm32-usart 40011000.serial: interrupt mode for tx (no dma)
     
371. [    3.553328] 40011000.serial: ttySTM2 at MMIO 0x40011000 (irq = 62, base_baud = 4000000) is a stm32-usart
     
372. [    3.564623] stm32-usart 40018000.serial: interrupt mode for rx (no dma)
     
373. [    3.569889] stm32-usart 40018000.serial: interrupt mode for tx (no dma)
     
374. [    3.576456] 40018000.serial: ttySTM3 at MMIO 0x40018000 (irq = 63, base_baud = 4000000) is a stm32-usart
     
375. [    3.591803] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
     
376. [    3.602675] m_can_platform 4400e000.can: m_can_platform device registered (irq=57, version=32)
     
377. [    3.611899] stm32-dwmac 5800a000.ethernet: PTP uses main clock
     
378. [    3.616297] stm32-dwmac 5800a000.ethernet: no reset control found
     
379. [    3.622492] stm32-dwmac 5800a000.ethernet: No phy clock provided...
     
380. [    3.629349] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
     
381. [    3.635681] stm32-dwmac 5800a000.ethernet:   DWMAC4/5
     
382. [    3.640723] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
     
383. [    3.648053] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
     
384. [    3.655319] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
     
385. [    3.662240] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
     
386. [    3.668528] stm32-dwmac 5800a000.ethernet: TSO supported
     
387. [    3.673830] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
     
388. [    3.681710] stm32-dwmac 5800a000.ethernet: TSO feature enabled
     
389. [    3.687872] libphy: stmmac: probed
     
390. [    3.698720] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_d not found, using dummy regulator
     
391. [    3.706393] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_a not found, using dummy regulator
     
392. [    3.847671] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
     
393. [    3.854863] dwc2 49000000.usb-otg: DWC OTG Controller
     
394. [    3.858830] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 1
     
395. [    3.866172] dwc2 49000000.usb-otg: irq 65, io mem 0x49000000
     
396. [    3.873147] hub 1-0:1.0: USB hub found
     
397. [    3.875612] hub 1-0:1.0: 1 port detected
     
398. [    3.881345] ehci-platform 5800d000.usbh-ehci: EHCI Host Controller
     
399. [    3.886124] ehci-platform 5800d000.usbh-ehci: new USB bus registered, assigned bus number 2
     
400. [    3.895009] ehci-platform 5800d000.usbh-ehci: irq 66, io mem 0x5800d000
     
401. [    3.927444] ehci-platform 5800d000.usbh-ehci: USB 2.0 started, EHCI 1.00
     
402. [    3.934029] hub 2-0:1.0: USB hub found
     
403. [    3.936520] hub 2-0:1.0: 2 ports detected
     
404. [    3.961090] stm32f7-i2c 40012000.i2c: doesn't use DMA
     
405. [    5.997419] typec_stusb 0-0028: Failed to get port caps: -110
     
406. [    6.002019] typec_stusb: probe of 0-0028 failed with error -110
     
407. [    6.009798] stm32f7-i2c 40012000.i2c: bus busy
     
408. [    6.012796] stm32f7-i2c 40012000.i2c: Trying to recover bus
     
409. [    6.018647] fusb302: probe of 0-0022 failed with error -1
     
410. [    6.024017] stm32f7-i2c 40012000.i2c: STM32F7 I2C-0 bus adapter
     
411. [    6.049788] stm32f7-i2c 40013000.i2c: doesn't use DMA
     
412. [    8.077468] edt_ft5x06: probe of 1-0038 failed with error -110
     
413. [    8.082601] Goodix-TS 1-0014: 1-0014 supply AVDD28 not found, using dummy regulator
     
414. [    8.089770] Goodix-TS 1-0014: 1-0014 supply VDDIO not found, using dummy regulator
     
415. [    8.218450] stm32f7-i2c 40013000.i2c: bus busy
     
416. [    8.221443] stm32f7-i2c 40013000.i2c: Trying to recover bus
     
417. [    8.227037] Goodix-TS 1-0014: i2c test failed attempt 1: -16
     
418. [   10.317401] Goodix-TS 1-0014: i2c test failed attempt 2: -110
     
419. [   10.357402] Goodix-TS 1-0014: I2C communication failure: -110
     
420. [   10.361920] Goodix-TS: probe of 1-0014 failed with error -110
     
421. [   10.367737] stm32f7-i2c 40013000.i2c: STM32F7 I2C-1 bus adapter
     
422. [   10.393257] stm32f7-i2c 40015000.i2c: doesn't use DMA
     
423. [   10.397668] stm32f7-i2c 40015000.i2c: STM32F7 I2C-2 bus adapter
     
424. [   10.422626] stm32f7-i2c 5c002000.i2c: doesn't use DMA
     
425. [   12.477426] rtc-pcf8563 3-0051: pcf8563_write_block_data: err=-110 addr=0e, data=03
     
426. [   12.483653] rtc-pcf8563 3-0051: pcf8563_probe: write error
     
427. [   12.489264] rtc-pcf8563: probe of 3-0051 failed with error -5
     
428. [   12.495893] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-3 bus adapter
     
429. [   12.502548] mmci-pl18x 48004000.sdmmc: mmc0: PL180 manf 53 rev1 at 0x48004000 irq 46,0 (pio)
     
430. [   12.537510] mmci-pl18x 58007000.sdmmc: mmc1: PL180 manf 53 rev2 at 0x58007000 irq 53,0 (pio)
     
431. [   12.575729] stm32-ipcc 4c001000.mailbox: ipcc rev:1.0 enabled, 6 chans, proc 0
     
432. [   12.585669] stm32-rproc mlahb:m4@10000000: wdg irq registered
     
433. [   12.591961] remoteproc remoteproc0: m4 is available
     
434. [   12.626413] st,stm32-i2s 4000b000.audio-controller: No cache defaults, reading back from HW
     
435. [   12.637675] st,stm32-spdifrx 4000d000.audio-controller: No cache defaults, reading back from HW
     
436. [   12.655033] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
     
437. [   12.670220] stm32f7-i2c 5c002000.i2c: bus busy
     
438. [   12.673249] mmc1: switch to bus width 8 failed
     
439. [   12.678811] stm32f7-i2c 5c002000.i2c: Trying to recover bus
     
440. [   12.684359] cs42l51 3-004a: failed to read I2C
     
441. [   12.688131] mmc1: new high speed MMC card at address 0001
     
442. [   12.693622] cs42l51: probe of 3-004a failed with error -16
     
443. [   12.700173] mmcblk1: mmc1:0001 MK008D 7.50 GiB
     
444. [   12.703965] mmcblk1boot0: mmc1:0001 MK008D partition 1 4.00 MiB
     
445. [   12.717443] mmcblk1boot1: mmc1:0001 MK008D partition 2 4.00 MiB
     
446. [   12.722627] mmcblk1rpmb: mmc1:0001 MK008D partition 3 4.00 MiB, chardev (242:0)
     
447. [   12.729759] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
     
448. [   12.735948] [drm] Driver supports precise vblank timestamp query.
     
449. [   12.744560] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
     
450. [   12.752486] [drm] Cannot find any crtc or sizes
     
451. [   12.763191]  mmcblk1: p1 p2 p3
     
452. [   12.765131] [drm] Cannot find any crtc or sizes
     
453. [   12.766088] input: gpio-keys as /devices/platform/gpio-keys/input/input0
     
454. [   12.778981] hctosys: unable to open rtc device (rtc0)
     
455. [   12.783230] cfg80211: Loading compiled-in X.509 certificates for regulatory database
     
456. [   12.808994] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
     
457. [   12.814307] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
     
458. [   12.822877] 8<--- cut here ---
     
459. [   12.825788] Unable to handle kernel NULL pointer dereference at virtual address 00000020
     
460. [   12.833912] pgd = 9b7b2b88
     
461. [   12.836615] [00000020] *pgd=00000000
     
462. [   12.840203] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
     
463. [   12.845610] Modules linked in:
     
464. [   12.848674] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         5.4.31 #5
     
465. [   12.856000] Hardware name: STM32 (Device Tree Support)
     
466. [   12.861166] PC is at mp1_mgate_clk_disable_safe+0x38/0x8c
     
467. [   12.866571] LR is at mp1_mgate_clk_disable_safe+0x10/0x8c
     
468. [   12.871982] pc : [<c05ff73c>]    lr : [<c05ff714>]    psr: 60000093
     
469. [   12.878270] sp : e689beb0  ip : 00000000  fp : 00000008
     
470. [   12.883509] r10: 0000014d  r9 : c11004a4  r8 : c116e858
     
471. [   12.888750] r7 : 00000000  r6 : 00000000  r5 : e6fc5840  r4 : e6fc3c40
     
472. [   12.895298] r3 : 00000000  r2 : c1323088  r1 : 00000001  r0 : e6fc3c40
     
473. [   12.901850] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
     
474. [   12.909096] Control: 10c5387d  Table: e584806a  DAC: 00000051
     
475. [   12.914861] Process swapper/0 (pid: 1, stack limit = 0xbe625cc4)
     
476. [   12.920886] Stack: (0xe689beb0 to 0xe689c000)
     
477. [   12.925257] bea0:                                     60000013 e6fc5840 c12c63f8 00000000
     
478. [   12.933468] bec0: c116e858 c05f7324 e6fc5840 e6fb60c0 ffffe000 00000000 c116e858 c05f726c
     
479. [   12.941676] bee0: e6fb60c0 c1321ed4 ffffe000 00000000 c116e858 c05f93a0 c12c3a40 c05f9368
     
480. [   12.949885] bf00: ffffe000 c0102fa8 00000001 c0168928 c10a2260 c1100400 c0f7fe60 00000000
     
481. [   12.958092] bf20: 00000007 00000007 00000000 c0f1d5dc c0f0e804 c0f0e7b8 c1199e10 e7fffe20
     
482. [   12.966300] bf40: e7fffe28 c1204e88 cccccccd 00000007 c12f7f00 c1204e88 c116e834 c119aa70
     
483. [   12.974508] bf60: c12f7f00 c12f7f00 c116e838 c1101110 00000007 00000007 00000000 c11004a4
     
484. [   12.982716] bf80: c0cd3fc8 00000000 c0cd3fc8 00000000 00000000 00000000 00000000 00000000
     
485. [   12.990925] bfa0: 00000000 c0cd3fd0 00000000 c01010e8 00000000 00000000 00000000 00000000
     
486. [   12.999135] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     
487. [   13.007345] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
     
488. [   13.015574] [<c05ff73c>] (mp1_mgate_clk_disable_safe) from [<c05f7324>] (clk_disable_unused_subtree+0xdc/0x260)
     
489. [   13.025694] [<c05f7324>] (clk_disable_unused_subtree) from [<c05f726c>] (clk_disable_unused_subtree+0x24/0x260)
     
490. [   13.035822] [<c05f726c>] (clk_disable_unused_subtree) from [<c05f93a0>] (clk_disable_unused+0x38/0x128)
     
491. [   13.045257] [<c05f93a0>] (clk_disable_unused) from [<c0102fa8>] (do_one_initcall+0x58/0x2b4)
     
492. [   13.053727] [<c0102fa8>] (do_one_initcall) from [<c1101110>] (kernel_init_freeable+0x1c8/0x264)
     
493. [   13.062458] [<c1101110>] (kernel_init_freeable) from [<c0cd3fd0>] (kernel_init+0x8/0x110)
     
494. [   13.070666] [<c0cd3fd0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
     
495. [   13.078254] Exception stack(0xe689bfb0 to 0xe689bff8)
     
496. [   13.083321] bfa0:                                     00000000 00000000 00000000 00000000
     
497. [   13.091534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     
498. [   13.099741] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
     
499. [   13.106380] Code: e5933004 e3530000 18bd81f0 e590606c (e5963020)
     
500. [   13.112491] ---[ end trace 93cb2c83ad0d023d ]---
     
501. [   13.117121] note: swapper/0[1] exited with preempt_count 1
     
502. [   13.122619] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
     
503. [   13.130312] CPU1: stopping
     
504. [   13.133013] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D W         5.4.31 #5
     
505. [   13.140340] Hardware name: STM32 (Device Tree Support)
     
506. [   13.145511] [<c0112518>] (unwind_backtrace) from [<c010d7a0>] (show_stack+0x10/0x14)
     
507. [   13.153275] [<c010d7a0>] (show_stack) from [<c0cbca34>] (dump_stack+0xb0/0xc4)
     
508. [   13.160523] [<c0cbca34>] (dump_stack) from [<c0110f50>] (handle_IPI+0x41c/0x448)
     
509. [   13.167947] [<c0110f50>] (handle_IPI) from [<c05af83c>] (gic_handle_irq+0x8c/0x90)
     
510. [   13.175541] [<c05af83c>] (gic_handle_irq) from [<c0101a8c>] (__irq_svc+0x6c/0xa8)
     
511. [   13.183043] Exception stack(0xe68cdf80 to 0xe68cdfc8)
     
512. [   13.188117] df80: 00000000 00000ac8 e7671074 c011b7c0 00000001 e68cc000 c1204ea8 c1204ee8
     
513. [   13.196326] dfa0: c000406a 410fc075 00000000 00000000 c130ea58 e68cdfd0 c010a1c8 c010a1cc
     
514. [   13.204528] dfc0: 60000013 ffffffff
     
515. [   13.208032] [<c0101a8c>] (__irq_svc) from [<c010a1cc>] (arch_cpu_idle+0x38/0x3c)
     
516. [   13.215458] [<c010a1cc>] (arch_cpu_idle) from [<c01584f0>] (do_idle+0xc4/0x14c)
     
517. [   13.222792] [<c01584f0>] (do_idle) from [<c0158864>] (cpu_startup_entry+0x18/0x1c)
     
518. [   13.230389] [<c0158864>] (cpu_startup_entry) from [<c010268c>] (__enable_mmu+0x0/0x14)
     
519. [   13.238336] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

复制代码

212545012

最少要引出哪些接口给地板，核心板才能启动