STM32F407的显示屏实验，我是程序源码自己移植，我买的屏幕型号ID:5310，我移植的代码就是把程序源码中别的型号代码删除，

风一幕 · 发表于 2021-4-18 17:43:34

STM32F407的显示屏实验，我是程序源码自己移植，我买的屏幕型号ID:5310，我移植的代码就是把程序源码中别的型号代码删除，然后就编译不通过了，求大神们指点。这是我移植以后的程序

风一幕 · 发表于 2021-4-19 11:33:20

Build started: Project: LCD
*** Using Compiler 'V5.06 update 6 (build 750)', folder: 'D:\Keil_v5\ARM\ARMCC\Bin'
Build target 'LCD'
compiling main.c...
compiling system_stm32f4xx.c...
compiling stm32f4xx_it.c...
compiling lcd.c...
..\HARDWARE\LCD\lcd.c(133): warning:  #177-D: variable "temp"  was declared but never referenced
    u16 temp;
..\HARDWARE\LCD\lcd.c(264): error:  #268: declaration may not appear after executable statement in block
  void LCD_Init(void)
..\HARDWARE\LCD\lcd.c(243): warning:  #177-D: variable "hsareg"  was declared but never referenced
    u8 hsareg,heareg,vsareg,veareg;
..\HARDWARE\LCD\lcd.c(243): warning:  #177-D: variable "heareg"  was declared but never referenced
    u8 hsareg,heareg,vsareg,veareg;
..\HARDWARE\LCD\lcd.c(243): warning:  #177-D: variable "vsareg"  was declared but never referenced
    u8 hsareg,heareg,vsareg,veareg;
..\HARDWARE\LCD\lcd.c(243): warning:  #177-D: variable "veareg"  was declared but never referenced
    u8 hsareg,heareg,vsareg,veareg;
..\HARDWARE\LCD\lcd.c(244): warning:  #177-D: variable "hsaval"  was declared but never referenced
    u16 hsaval,heaval,vsaval,veaval;
..\HARDWARE\LCD\lcd.c(244): warning:  #177-D: variable "heaval"  was declared but never referenced
    u16 hsaval,heaval,vsaval,veaval;
..\HARDWARE\LCD\lcd.c(244): warning:  #177-D: variable "vsaval"  was declared but never referenced
    u16 hsaval,heaval,vsaval,veaval;
..\HARDWARE\LCD\lcd.c(244): warning:  #177-D: variable "veaval"  was declared but never referenced
    u16 hsaval,heaval,vsaval,veaval;
..\HARDWARE\LCD\lcd.c(264): error:  #67: expected a "}"
  void LCD_Init(void)
..\HARDWARE\LCD\lcd.c: 9 warnings, 2 errors
compiling led.c...
compiling delay.c...
assembling startup_stm32f40_41xxx.s...
compiling sys.c...
compiling usart.c...
compiling misc.c...
compiling stm32f4xx_gpio.c...
compiling stm32f4xx_fsmc.c...
compiling stm32f4xx_rcc.c...
compiling stm32f4xx_syscfg.c...
compiling stm32f4xx_usart.c...
"..\OBJ\LCD.axf" - 2 Error(s), 9 Warning(s).
Target not created.
Build Time Elapsed:  00:00:06，这是错误