内核移植出现问题-->Ramdisk image is corrupt or invalid？

叶落 · 发表于 2020-1-9 09:54:19

以下是uboot信息，内核加载出现问题--》Ramdisk image is corrupt or invalid？，请问该怎么解决啊？？

=> pri
baudrate=115200
board_name=EVK
board_rev=14X14
boot_fdt=try
bootcmd=run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};
bootdelay=3
bootscript=echo Running bootscript from mmc ...; source
console=ttymxc0
ethact=FEC1
ethprime=FEC
fdt_addr=0x83000000
fdt_file=imx6ull-14x14-emmc-4.3-480x272-c.dtb
fdt_high=0xffffffff
findfdt=if test $fdt_file = undefined; then if test $board_name = EVK && test $board_rev = 9X9; then setenv fdt_file imx6ull-9x9-evk.dtb; fi; if test $board_name = EVK && test $board_rev = 14X14; then setenv fdt_file imx6ull-14x14-evk.dtb; fi; if test $fdt_file = undefined; then echo WARNING: Could not determine dtb to use; fi; fi;
image=zImage
initrd_addr=0x83800000
initrd_high=0xffffffff
ip_dyn=yes
loadaddr=0x80800000
loadbootscript=fatload mmc ${mmcdev}

{mmcpart} ${loadaddr} ${script};
loadfdt=fatload mmc ${mmcdev}

{mmcpart} ${fdt_addr} ${fdt_file}
loadimage=fatload mmc ${mmcdev}

{mmcpart} ${loadaddr} ${image}
logo_file=alientek.bmp
mfgtool_args=setenv bootargs console=${console},${baudrate} rdinit=/linuxrc g_mass_storage.stall=0 g_mass_storage.removable=1 g_mass_storage.file=/fat g_mass_storage.ro=1 g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF g_mass_storage.iSerialNumber="" clk_ignore_unused
mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}
mmcautodetect=yes
mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcdev=0
mmcpart=1
mmcroot=/dev/mmcblk0p2 rootwait rw
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}

{nfsroot},v3,tcp
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${image}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
panel=ATK-LCD-4.3-480x272
script=boot.scr
splashimage=0x88000000
splashpos=m,m

Environment size: 2536/8188 bytes
=> setenv bootargs root=/dev/nfs nfsroot=192.168.0.103:/home/zhou/Desktop/nfsserver/rootfs rw console=ttySAC2,115200 init=linuxrc ip=192.168.0.200 loglevel=8
=> setenv bootcmd tftp 80800000 zImage\;tftp 83000000 lora_gateway.dtb\;bootz 80800000 – 83000000
=> setenv ipaddr 192.168.0.200
=> setenv ethaddr 00:04:9f:04:d2:35
=> setenv gatewayip 192.168.0.1
=> setenv netmask 255.255.255.0
=> setenv serverip 192.168.0.103
=> saveenv

Kernel image @ 0x80800000 [ 0x000000 - 0x552f18 ]
Wrong Ramdisk Image Format
Ramdisk image is corrupt or invalid