RT1052始终不能正常工作

天子帝师

我用1052采集MT9V032摄像头的数据#define CAMERA_WIDTH                                (188)
#define CAMERA_HEIGHT                                (120)
#define CAMERA_BPP                                        (1)                // Bytes Per Pixel
#define CAMERA_SIZE                                        (CAMERA_WIDTH*CAMERA_HEIGHT*CAMERA_BPP)
#define CAMERA_CONTROL_FLAGS                 (kCAMERA_VsyncActiveHigh|kCAMERA_HrefActiveHigh|kCAMERA_DataLatchOnRisingEdge)
#define CAMERA_FRAME_BUFFER_COUNT        (4)


const camera_config_t cameraConfig = {
    .pixelFormat = kVIDEO_PixelFormatYUYV,                        //THIS PARAM HAS NO MEANNING
    .bytesPerPixel = CAMERA_BPP,
    .resolution = FSL_VIDEO_RESOLUTION(CAMERA_WIDTH, CAMERA_HEIGHT),
    .frameBufferLinePitch_Bytes = CAMERA_WIDTH*CAMERA_BPP,
    .interface = kCAMERA_InterfaceGatedClock,
    .controlFlags = CAMERA_CONTROL_FLAGS,
    .framePerSec = 60,                                                                        //THIS PARAM HAS NO MEANNING
};


CAMERA_RECEIVER_Init(&cameraReceiver, &cameraConfig, NULL, NULL);

    CAMERA_DEVICE_Init(&cameraDevice, &cameraConfig);
    CAMERA_DEVICE_Start(&cameraDevice);
               
                //LCD_P6x8Str(15,3,"Success");
                for (uint32_t i = 0; i < 4; i++)
   {
        CAMERA_RECEIVER_SubmitEmptyBuffer(&cameraReceiver, (uint32_t)(csiFrameBuf[i]));
  }

到这里都还是正常的摄像头的IIC也正常工作了可以读出摄像头ID
然后到
CAMERA_RECEIVER_Start(&cameraReceiver);
while (kStatus_Success != CAMERA_RECEIVER_GetFullBuffer(&cameraReceiver, &activeFrameAddr))
    {
                        ;
  }


我打了断点在这里 那个数组里面始终没有数据空的

我不知道问题出在哪里

天子帝师

@zuozhongkai