高级会员
- 积分
- 608
- 金钱
- 608
- 注册时间
- 2015-9-7
- 在线时间
- 141 小时
|
1金钱
移植了ST官方的Ymodem，但是发现在128字节模式下最多只能接收255*128=32640字节文件，在1K模式是最多只能接收255K的文件，这个得怎么改啊？/**
******************************************************************************
* @file IAP_Main/Src/ymodem.c
* @Author MCD Application Team
* @version 1.0.0
* @date 8-April-2015
* @brief This file provides all the software functions related to the ymodem
* protocol.
******************************************************************************
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/** @addtogroup STM32L0xx_IAP
* @{
*/
/* Includes ------------------------------------------------------------------*/
#include "flash_if.h"
#include "common.h"
#include "ymodem.h"
#include "string.h"
#include "main.h"
#include "menu.h"
#include "aes.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define CRC16_F /* activate the CRC16 integrity */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* @note ATTENTION - please keep this variable 32bit alligned */
uint8_t aPacketData[PACKET_1K_SIZE + PACKET_DATA_INDEX + PACKET_TRAILER_SIZE];
/* Private function prototypes -----------------------------------------------*/
static void PrepareIntialPacket(uint8_t *p_data, const uint8_t *p_file_name, uint32_t length);
static void PreparePacket(uint8_t *p_source, uint8_t *p_packet, uint8_t pkt_nr, uint32_t size_blk);
static HAL_StatusTypeDef ReceivePacket(uint8_t *p_data, uint32_t *p_length, uint32_t timeout);
uint16_t UpdateCRC16(uint16_t crc_in, uint8_t byte);
uint16_t Cal_CRC16(const uint8_t* p_data, uint32_t size);
uint8_t CalcChecksum(const uint8_t *p_data, uint32_t size);
uint8_t aFileName[FILE_NAME_LENGTH];
/* Private functions ---------------------------------------------------------*/
/**
* @brief Receive a packet from sender
* @param data
* @param length
* 0: end of transmission
* 2: abort by sender
* >0: packet length
* @param timeout
* @retval HAL_OK: normally return
* HAL_BUSY: abort by user
*/
static HAL_StatusTypeDef ReceivePacket(uint8_t *p_data, uint32_t *p_length, uint32_t timeout)
{
uint32_t crc;
uint32_t packet_size = 0;
HAL_StatusTypeDef status;
uint8_t char1;
*p_length = 0;
status = HAL_UART_Receive(&UartHandle, &char1, 1, timeout);
if (status == HAL_OK)
{
switch (char1)
{
case SOH:
packet_size = PACKET_SIZE;
break;
case STX:
packet_size = PACKET_1K_SIZE;
break;
case EOT:
break;
case CA:
if ((HAL_UART_Receive(&UartHandle, &char1, 1, timeout) == HAL_OK) && (char1 == CA))
{
packet_size = 2;
}
else
{
status = HAL_ERROR;
}
break;
case ABORT1:
case ABORT2:
status = HAL_BUSY;
break;
default:
status = HAL_ERROR;
break;
}
*p_data = char1;
if (packet_size >= PACKET_SIZE )
{
status = HAL_UART_Receive(&UartHandle, &p_data[PACKET_NUMBER_INDEX], packet_size + PACKET_OVERHEAD_SIZE, timeout);
/* Simple packet sanity check */
if (status == HAL_OK )
{
if (p_data[PACKET_NUMBER_INDEX] != ((p_data[PACKET_CNUMBER_INDEX]) ^ NEGATIVE_BYTE))
{
packet_size = 0;
status = HAL_ERROR;
}
else
{
/* Check packet CRC */
crc = p_data[ packet_size + PACKET_DATA_INDEX ] << 8;
crc += p_data[ packet_size + PACKET_DATA_INDEX + 1 ];
if (HAL_CRC_Calculate(&CrcHandle, (uint32_t*)&p_data[PACKET_DATA_INDEX], packet_size) != crc )
{
packet_size = 0;
status = HAL_ERROR;
}
}
}
else
{
packet_size = 0;
}
}
}
*p_length = packet_size;
return status;
}
/**
* @brief Prepare the first block
* @param p_data: output buffer
* @param p_file_name: name of the file to be sent
* @param length: length of the file to be sent in bytes
* @retval None
*/
static void PrepareIntialPacket(uint8_t *p_data, const uint8_t *p_file_name, uint32_t length)
{
uint32_t i, j = 0;
uint8_t astring[10];
/* first 3 bytes are constant */
p_data[PACKET_START_INDEX] = SOH;
p_data[PACKET_NUMBER_INDEX] = 0x00;
p_data[PACKET_CNUMBER_INDEX] = 0xff;
/* Filename written */
for (i = 0; (p_file_name != '\0') && (i < FILE_NAME_LENGTH); i++)
{
p_data[i + PACKET_DATA_INDEX] = p_file_name;
}
p_data[i + PACKET_DATA_INDEX] = 0x00;
/* file size written */
Int2Str (astring, length);
i = i + PACKET_DATA_INDEX + 1;
while (astring[j] != '\0')
{
p_data[i++] = astring[j++];
}
/* padding with zeros */
for (j = i; j < PACKET_SIZE + PACKET_DATA_INDEX; j++)
{
p_data[j] = 0;
}
}
/**
* @brief Prepare the data packet
* @param p_source: pointer to the data to be sent
* @param p_packet: pointer to the output buffer
* @param pkt_nr: number of the packet
* @param size_blk: length of the block to be sent in bytes
* @retval None
*/
static void PreparePacket(uint8_t *p_source, uint8_t *p_packet, uint8_t pkt_nr, uint32_t size_blk)
{
uint8_t *p_record;
uint32_t i, size, packet_size;
/* Make first three packet */
packet_size = size_blk >= PACKET_1K_SIZE ? PACKET_1K_SIZE : PACKET_SIZE;
size = size_blk < packet_size ? size_blk : packet_size;
if (packet_size == PACKET_1K_SIZE)
{
p_packet[PACKET_START_INDEX] = STX;
}
else
{
p_packet[PACKET_START_INDEX] = SOH;
}
p_packet[PACKET_NUMBER_INDEX] = pkt_nr;
p_packet[PACKET_CNUMBER_INDEX] = (~pkt_nr);
p_record = p_source;
/* Filename packet has valid data */
for (i = PACKET_DATA_INDEX; i < size + PACKET_DATA_INDEX;i++)
{
p_packet = *p_record++;
}
if ( size <= packet_size)
{
for (i = size + PACKET_DATA_INDEX; i < packet_size + PACKET_DATA_INDEX; i++)
{
p_packet = 0x1A; /* EOF (0x1A) or 0x00 */
}
}
}
/**
* @brief Update CRC16 for input byte
* @param crc_in input value
* @param input byte
* @retval None
*/
uint16_t UpdateCRC16(uint16_t crc_in, uint8_t byte)
{
uint32_t crc = crc_in;
uint32_t in = byte | 0x100;
do
{
crc <<= 1;
in <<= 1;
if(in & 0x100)
++crc;
if(crc & 0x10000)
crc ^= 0x1021;
}
while(!(in & 0x10000));
return crc & 0xffffu;
}
/**
* @brief Cal CRC16 for YModem Packet
* @param data
* @param length
* @retval None
*/
uint16_t Cal_CRC16(const uint8_t* p_data, uint32_t size)
{
uint32_t crc = 0;
const uint8_t* dataEnd = p_data+size;
while(p_data < dataEnd)
crc = UpdateCRC16(crc, *p_data++);
crc = UpdateCRC16(crc, 0);
crc = UpdateCRC16(crc, 0);
return crc&0xffffu;
}
/**
* @brief Calculate Check sum for YModem Packet
* @param p_data Pointer to input data
* @param size length of input data
* @retval uint8_t checksum value
*/
uint8_t CalcChecksum(const uint8_t *p_data, uint32_t size)
{
uint32_t sum = 0;
const uint8_t *p_data_end = p_data + size;
while (p_data < p_data_end )
{
sum += *p_data++;
}
return (sum & 0xffu);
}
/* Public functions ---------------------------------------------------------*/
/**
* @brief Receive a file using the ymodem protocol with CRC16.
* @param p_size The size of the file.
* @retval COM_StatusTypeDef result of reception/programming
*/
COM_StatusTypeDef Ymodem_Receive ( uint32_t *p_size )
{
uint32_t i, packet_length, session_done = 0, file_done, errors = 0, session_begin = 0;
uint32_t flashdestination, filesize;
uint8_t *file_ptr;
uint8_t file_size[FILE_SIZE_LENGTH], tmp;
uint32_t packets_received;
COM_StatusTypeDef result = COM_OK;
/* Initialize flashdestination variable */
flashdestination = APPLICATION_ADDRESS;
while ((session_done == 0) && (result == COM_OK))
{
packets_received = 0;
file_done = 0;
while ((file_done == 0) && (result == COM_OK))
{
switch (ReceivePacket(aPacketData, &packet_length, DOWNLOAD_TIMEOUT))
{
case HAL_OK:
errors = 0;
switch (packet_length)
{
case 2:
/* Abort by sender */
Serial_PutByte(ACK);
result = COM_ABORT;
break;
case 0:
/* End of transmission */
Serial_PutByte(ACK);
file_done = 1;
break;
default:
/* Normal packet */
if (aPacketData[PACKET_NUMBER_INDEX] != packets_received)
{
Serial_PutByte(NAK);
}
else
{
if (packets_received == 0)
{
/* File name packet */
if (aPacketData[PACKET_DATA_INDEX] != 0)
{
/* File name extraction */
i = 0;
file_ptr = aPacketData + PACKET_DATA_INDEX;
while ( (*file_ptr != 0) && (i < FILE_NAME_LENGTH))
{
aFileName[i++] = *file_ptr++;
}
/* File size extraction */
aFileName[i++] = '\0';
i = 0;
file_ptr ++;
while ( (*file_ptr != ' ') && (i < FILE_SIZE_LENGTH))
{
file_size[i++] = *file_ptr++;
}
file_size[i++] = '\0';
Str2Int(file_size, &filesize);
/* Test the size of the image to be sent */
/* Image size is greater than Flash size */
if (*p_size > (USER_FLASH_SIZE + 1))
{
/* End session */
tmp = CA;
HAL_UART_Transmit(&UartHandle, &tmp, 1, NAK_TIMEOUT);
HAL_UART_Transmit(&UartHandle, &tmp, 1, NAK_TIMEOUT);
result = COM_LIMIT;
}
/* erase user application area */
FLASH_If_Erase(APPLICATION_ADDRESS); //收到第一帧后擦除flash
*p_size = filesize;
Serial_PutByte(ACK);
Serial_PutByte(CRC16);
}
/* File header packet is empty, end session */
else
{
Serial_PutByte(ACK);
file_done = 1;
session_done = 1;
break;
}
}
else /* Data packet */
{
// ramsource =&aPacketData[PACKET_DATA_INDEX];
/* Write received data in Flash */
if (FLASH_If_Write(flashdestination,(uint8_t *)&aPacketData[PACKET_DATA_INDEX], packet_length) == FLASHIF_OK)
{
flashdestination += packet_length;
Serial_PutByte(ACK);
}
else /* An error occurred while writing to Flash memory */
{
/* End session */
Serial_PutByte(CA);
Serial_PutByte(CA);
result = COM_DATA;
}
}
packets_received ++;
session_begin = 1;
}
break;
}
break;
case HAL_BUSY: /* Abort actually */
Serial_PutByte(CA);
Serial_PutByte(CA);
result = COM_ABORT;
break;
default:
if (session_begin > 0)
{
errors ++;
}
if (errors > MAX_ERRORS)
{
/* Abort communication */
Serial_PutByte(CA);
Serial_PutByte(CA);
}
else
{
Serial_PutByte(CRC16); /* Ask for a packet */
}
break;
}
}
}
return result;
}
/**
* @brief Transmit a file using the ymodem protocol
* @param p_buf: Address of the first byte
* @param p_file_name: Name of the file sent
* @param file_size: Size of the transmission
* @retval COM_StatusTypeDef result of the communication
*/
COM_StatusTypeDef Ymodem_Transmit (uint8_t *p_buf, const uint8_t *p_file_name, uint32_t file_size)
{
uint32_t errors = 0, ack_recpt = 0, size = 0, pkt_size;
uint8_t *p_buf_int;
COM_StatusTypeDef result = COM_OK;
uint32_t blk_number = 1;
uint8_t a_rx_ctrl[2];
uint8_t i;
#ifdef CRC16_F
uint32_t temp_crc;
#else /* CRC16_F */
uint8_t temp_chksum;
#endif /* CRC16_F */
/* Prepare first block - header */
PrepareIntialPacket(aPacketData, p_file_name, file_size);
while (( !ack_recpt ) && ( result == COM_OK ))
{
/* Send Packet */
HAL_UART_Transmit(&UartHandle, &aPacketData[PACKET_START_INDEX], PACKET_SIZE + PACKET_HEADER_SIZE, NAK_TIMEOUT);
/* Send CRC or Check Sum based on CRC16_F */
#ifdef CRC16_F
temp_crc = HAL_CRC_Calculate(&CrcHandle, (uint32_t*)&aPacketData[PACKET_DATA_INDEX], PACKET_SIZE);
Serial_PutByte(temp_crc >> 8);
Serial_PutByte(temp_crc & 0xFF);
#else /* CRC16_F */
temp_chksum = CalcChecksum (&aPacketData[PACKET_DATA_INDEX], PACKET_SIZE);
Serial_PutByte(temp_chksum);
#endif /* CRC16_F */
/* Wait for Ack and 'C' */
if (HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK)
{
if (a_rx_ctrl[0] == ACK)
{
ack_recpt = 1;
}
else if (a_rx_ctrl[0] == CA)
{
if ((HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK) && (a_rx_ctrl[0] == CA))
{
HAL_Delay( 2 );
__HAL_UART_FLUSH_DRREGISTER(&UartHandle);
__HAL_UART_CLEAR_IT(&UartHandle, UART_CLEAR_OREF);
result = COM_ABORT;
}
}
}
else
{
errors++;
}
if (errors >= MAX_ERRORS)
{
result = COM_ERROR;
}
}
p_buf_int = p_buf;
size = file_size;
/* Here 1024 bytes length is used to send the packets */
while ((size) && (result == COM_OK ))
{
/* Prepare next packet */
PreparePacket(p_buf_int, aPacketData, blk_number, size);
ack_recpt = 0;
a_rx_ctrl[0] = 0;
errors = 0;
/* Resend packet if NAK for few times else end of communication */
while (( !ack_recpt ) && ( result == COM_OK ))
{
/* Send next packet */
if (size >= PACKET_1K_SIZE)
{
pkt_size = PACKET_1K_SIZE;
}
else
{
pkt_size = PACKET_SIZE;
}
HAL_UART_Transmit(&UartHandle, &aPacketData[PACKET_START_INDEX], pkt_size + PACKET_HEADER_SIZE, NAK_TIMEOUT);
/* Send CRC or Check Sum based on CRC16_F */
#ifdef CRC16_F
temp_crc = HAL_CRC_Calculate(&CrcHandle, (uint32_t*)&aPacketData[PACKET_DATA_INDEX], pkt_size);
Serial_PutByte(temp_crc >> 8);
Serial_PutByte(temp_crc & 0xFF);
#else /* CRC16_F */
temp_chksum = CalcChecksum (&aPacketData[PACKET_DATA_INDEX], pkt_size);
Serial_PutByte(temp_chksum);
#endif /* CRC16_F */
/* Wait for Ack */
if ((HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK) && (a_rx_ctrl[0] == ACK))
{
ack_recpt = 1;
if (size > pkt_size)
{
p_buf_int += pkt_size;
size -= pkt_size;
if (blk_number == (USER_FLASH_SIZE / PACKET_1K_SIZE))
{
result = COM_LIMIT; /* boundary error */
}
else
{
blk_number++;
}
}
else
{
p_buf_int += pkt_size;
size = 0;
}
}
else
{
errors++;
}
/* Resend packet if NAK for a count of 10 else end of communication */
if (errors >= MAX_ERRORS)
{
result = COM_ERROR;
}
}
}
/* Sending End Of Transmission char */
ack_recpt = 0;
a_rx_ctrl[0] = 0x00;
errors = 0;
while (( !ack_recpt ) && ( result == COM_OK ))
{
Serial_PutByte(EOT);
/* Wait for Ack */
if (HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK)
{
if (a_rx_ctrl[0] == ACK)
{
ack_recpt = 1;
}
else if (a_rx_ctrl[0] == CA)
{
if ((HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK) && (a_rx_ctrl[0] == CA))
{
HAL_Delay( 2 );
__HAL_UART_FLUSH_DRREGISTER(&UartHandle);
__HAL_UART_CLEAR_IT(&UartHandle, UART_CLEAR_OREF);
result = COM_ABORT;
}
}
}
else
{
errors++;
}
if (errors >= MAX_ERRORS)
{
result = COM_ERROR;
}
}
/* Empty packet sent - some terminal emulators need this to close session */
if ( result == COM_OK )
{
/* Preparing an empty packet */
aPacketData[PACKET_START_INDEX] = SOH;
aPacketData[PACKET_NUMBER_INDEX] = 0;
aPacketData[PACKET_CNUMBER_INDEX] = 0xFF;
for (i = PACKET_DATA_INDEX; i < (PACKET_SIZE + PACKET_DATA_INDEX); i++)
{
aPacketData = 0x00;
}
/* Send Packet */
HAL_UART_Transmit(&UartHandle, &aPacketData[PACKET_START_INDEX], PACKET_SIZE + PACKET_HEADER_SIZE, NAK_TIMEOUT);
/* Send CRC or Check Sum based on CRC16_F */
#ifdef CRC16_F
temp_crc = HAL_CRC_Calculate(&CrcHandle, (uint32_t*)&aPacketData[PACKET_DATA_INDEX], PACKET_SIZE);
Serial_PutByte(temp_crc >> 8);
Serial_PutByte(temp_crc & 0xFF);
#else /* CRC16_F */
temp_chksum = CalcChecksum (&aPacketData[PACKET_DATA_INDEX], PACKET_SIZE);
Serial_PutByte(temp_chksum);
#endif /* CRC16_F */
/* Wait for Ack and 'C' */
if (HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK)
{
if (a_rx_ctrl[0] == CA)
{
HAL_Delay( 2 );
__HAL_UART_FLUSH_DRREGISTER(&UartHandle);
__HAL_UART_CLEAR_IT(&UartHandle, UART_CLEAR_OREF);
result = COM_ABORT;
}
}
}
return result; /* file transmitted successfully */
}
/**
* @}
*/
/*******************(C)COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
|
最佳答案
查看完整内容[请看2#楼]
packets_received 声明为U32类型的数据，判断的时候修改如下
if (aPacketData != (packets_received & 0xff))
官方的BUG挺多的
|
/1 
|手机版|OpenEdv-开源电子网
( 粤ICP备12000418号-1 )
发表于 2018-3-28 16:37:10
楼主
