stm32 iap 升级问题

catbal

我做iap升级的时候  测试过历程 是能正常升级的，  但是我自己的程序 升级跑不起来（我的程序单独跑没问题）  我把部分程序复制出来 大神看看 谢谢！！！

int  main()
{
        unsigned char i,rlen=0;
        unsigned char time_flag;
        unsigned char constate=0;
        u8 num=0,len;
        u8 min_data=0;
       
        u16 ddd=0,temp=0;
       
       
        delay_init(72);     //Ñóê±3õê¼»ˉ
        OLED_Init();      //oled 3õê¼»ˉ
        EXTIX_Init();
        Adc_Init();
        uart_init(9600);         //′®¿ú13õê¼»ˉ
        USART2_Init(36,115200);  //′®¿ú33õê¼»ˉ
  OLED_CS_Clr();
  Rainbow();
  Fill_RAM(0x00,0x00);                // oled Clear Screen
        TIM3_Int_Init(4999,7199);//10KhzμļÆêyÆμÂê￡¬¼Æêyμ½5000Îa500ms
        TIM2_Int_Init(4999,7199);
        Delay(10);
delay_ms(1000);


while(1)
{
  printf("d833448");
        delay_ms(1000);
}

}


void uart_init(u32 bound){
  //GPIO¶Ë¿úéèÖÃ
  GPIO_InitTypeDef GPIO_InitStructure;
        USART_InitTypeDef USART_InitStructure;
        NVIC_InitTypeDef NVIC_InitStructure;
         
        RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOA, ENABLE);        //ê1ÄüUSART1￡¬GPIOAê±Öó

        //USART1_TX   GPIOA.9
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; //PA.9
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;        //¸′óÃíÆíìêä3ö
  GPIO_Init(GPIOA, &GPIO_InitStructure);//3õê¼»ˉGPIOA.9

  //USART1_RX          GPIOA.103õê¼»ˉ
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;//PA10
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;//¸¡¿Õêäèë
  GPIO_Init(GPIOA, &GPIO_InitStructure);//3õê¼»ˉGPIOA.10  

  //Usart1 NVIC ÅäÖÃ
  NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=3 ;//ÇàÕ¼óÅÏ輶3
        NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;                //×óóÅÏ輶3
        NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;                        //IRQí¨μàê1Äü
        NVIC_Init(&NVIC_InitStructure);        //¸ù¾YÖ¸¶¨μÄ2Îêy3õê¼»ˉVIC¼Ä′æÆ÷

   //USART 3õê¼»ˉéèÖÃ

        USART_InitStructure.USART_BaudRate = bound;//′®¿ú2¨ìØÂê
        USART_InitStructure.USART_WordLength = USART_WordLength_8b;//×Ö3¤Îa8λêy¾Y¸ñê½
        USART_InitStructure.USART_StopBits = USART_StopBits_1;//ò»¸öí￡Ö1λ
        USART_InitStructure.USART_Parity = USART_Parity_No;//ÎTÆæżD￡Ñéλ
        USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;//ÎTó2¼têy¾Yá÷¿ØÖÆ
        USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;        //êÕ·￠Ä￡ê½

  USART_Init(USART1, &USART_InitStructure); //3õê¼»ˉ′®¿ú1
  USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);//¿aÆô′®¿ú½óêüÖD¶Ï
  USART_Cmd(USART1, ENABLE);                    //ê1Äü′®¿ú1

}



void TIM3_Int_Init(u16 arr,u16 psc)
{
    TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
        NVIC_InitTypeDef NVIC_InitStructure;

        RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE); //ê±Öóê1Äü

        TIM_TimeBaseStructure.TIM_Period = arr; //éèÖÃÔúÏÂò»¸ö¸üDÂê¼t×°èë»î¶ˉμÄ×Ô¶ˉÖØ×°ÔؼÄ′æÆ÷ÖüÆúμÄÖμ         ¼Æêyμ½5000Îa500ms
        TIM_TimeBaseStructure.TIM_Prescaler =psc; //éèÖÃóÃà′×÷ÎaTIMxê±ÖóÆμÂê3yêyμÄÔ¤·ÖÆμÖμ  10KhzμļÆêyÆμÂê  
        TIM_TimeBaseStructure.TIM_ClockDivision = 0; //éèÖÃê±Öó·Ö¸î:TDTS = Tck_tim
        TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  //TIMÏòéϼÆêyÄ￡ê½
        TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure); //¸ù¾YTIM_TimeBaseInitStructÖDÖ¸¶¨μÄ2Îêy3õê¼»ˉTIMxμÄê±¼ä»ùêyμ￥λ

        TIM_ITConfig(  //ê1Äü»òÕßê§ÄüÖ¸¶¨μÄTIMÖD¶Ï
                TIM3, //TIM2
                TIM_IT_Update ,
                ENABLE  //ê1Äü
                );
        NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;  //TIM3ÖD¶Ï
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3;  //ÏèÕ¼óÅÏ輶0¼¶
        NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;  //′óóÅÏ輶3¼¶
        NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQí¨μà±»ê1Äü
        NVIC_Init(&NVIC_InitStructure);  //¸ù¾YNVIC_InitStructÖDÖ¸¶¨μÄ2Îêy3õê¼»ˉíaéèNVIC¼Ä′æÆ÷
                TIM_Cmd(TIM3, ENABLE);  //ê1ÄüTIMxíaéè
                                                         
}


void TIM2_Int_Init(u16 arr,u16 psc)
{
  TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
        NVIC_InitTypeDef NVIC_InitStructure;

        RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); //ê±Öóê1Äü

        TIM_TimeBaseStructure.TIM_Period = arr; //éèÖÃÔúÏÂò»¸ö¸üDÂê¼t×°èë»î¶ˉμÄ×Ô¶ˉÖØ×°ÔؼÄ′æÆ÷ÖüÆúμÄÖμ         ¼Æêyμ½5000Îa500ms
        TIM_TimeBaseStructure.TIM_Prescaler =psc; //éèÖÃóÃà′×÷ÎaTIMxê±ÖóÆμÂê3yêyμÄÔ¤·ÖÆμÖμ  10KhzμļÆêyÆμÂê  
        TIM_TimeBaseStructure.TIM_ClockDivision = 0; //éèÖÃê±Öó·Ö¸î:TDTS = Tck_tim
        TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  //TIMÏòéϼÆêyÄ￡ê½
        TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); //¸ù¾YTIM_TimeBaseInitStructÖDÖ¸¶¨μÄ2Îêy3õê¼»ˉTIMxμÄê±¼ä»ùêyμ￥λ

        TIM_ITConfig(  //ê1Äü»òÕßê§ÄüÖ¸¶¨μÄTIMÖD¶Ï
                TIM2, //TIM2
                TIM_IT_Update ,
                ENABLE  //ê1Äü
                );
        NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;  //TIM3ÖD¶Ï
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;  //ÏèÕ¼óÅÏ輶0¼¶
        NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;  //′óóÅÏ輶3¼¶
        NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQí¨μà±»ê1Äü
        NVIC_Init(&NVIC_InitStructure);  //¸ù¾YNVIC_InitStructÖDÖ¸¶¨μÄ2Îêy3õê¼»ˉíaéèNVIC¼Ä′æÆ÷

                TIM_Cmd(TIM2, DISABLE);  //ê1ÄüTIMxíaéè
                                                         
}

正点原子

帮顶，慢慢找问题吧