编译出错，

WJY0821 · 发表于 2013-9-16 00:05:21

compiling delay.c...

compiling usart.c...

linking...

..\OBJ\test.axf: Warning: L6373E: libattrs.map file not found in System Library directory D:\MKD\armlib\. Library selection may be impaired.

..\OBJ\test.axf: Warning: L6373E: libattrs.map file not found in System Library directory 3.8\ARM\RV31\LIB\armlib\. Library selection may be impaired.

..\OBJ\test.axf: Warning: L6310W: Unable to find ARM libraries.

..\OBJ\test.axf: Error: L6411W: No compatible library exists with a definition of startup symbol __main.

Target not created

请问，这个问题可以怎么处理，已经重装了keil，还是不行

ADS · 发表于 2013-9-16 06:37:29

没遇过

正点原子 · 发表于 2013-9-16 11:07:05

回复【楼主位】WJY0821:
---------------------------------
看看是不是.s文件没有添加?

WJY0821 · 发表于 2013-9-16 22:01:18

回复【3楼】正点原子:
--------------------------------启动文件添加了，mdk3.80a重装了，按照视频装的，以前安装的编译软件都卸载了，还是报错，

正点原子 · 发表于 2013-9-16 22:17:18

那你上传你的工程。

WJY0821 · 发表于 2013-9-16 23:38:33

回复【5楼】正点原子:
---------------------------------
#include"sys.h"
#include"delay.h"
#include"usart.h"

int main(void)
{
u8 t=0;
Stm32_Clock_Init(9);
uart_init(72,9600); //时钟，72MHZ ，波特率9600，；（72,9600）；
delay_init(72);
while(1)
{
printf("t=%d\r\n",t);
t++;
delay_ms(500);
}
}

都是视屏上的工程，

可能是我的MDK3.80A安装问题，按照视频重装了，也一样。

WJY0821 · 发表于 2013-9-17 01:29:38

回复【6楼】WJY0821:
---------------------------------

我的启动文件会不会是有问题，？

八度空间 · 发表于 2013-9-17 10:17:02

回复【7楼】WJY0821:
---------------------------------
MDK破解了没有。重新拷贝启动文件试下

WJY0821 · 发表于 2013-9-17 14:37:06

昨天我按照库函数那本书重新建立了工程，有报错找不到什么文件，但工程里有添加，；
compiling main.c...
..\core\core_cm3.h(90): error:  #5: cannot open source input file "stdint.h": No such file or directory
compiling stm32f10x_it.c...
..\core\core_cm3.h(90): error:  #5: cannot open source input file "stdint.h": No such file or directory
compiling system_stm32f10x.c...
..\core\core_cm3.h(90): error:  #5: cannot open source input file "stdint.h": No such file or directory
compiling core_cm3.c...
..\core\core_cm3.c(24): error:  #5: cannot open source input file "stdint.h": No such file or directory
assembling startup_stm32f10x_hd.s...
compiling misc.c...
..\stm32f10x_fwlib\src\misc.c(24): error:  #5: cannot open source input file "misc.h": No such file or directory
compiling stm32f10x_bkp.c...
..\stm32f10x_fwlib\src\stm32f10x_bkp.c(23): error:  #5: cannot open source input file "stm32f10x_bkp.h": No such file or directory
compiling stm32f10x_can.c...
..\stm32f10x_fwlib\src\stm32f10x_can.c(23): error:  #5: cannot open source input file "stm32f10x_can.h": No such file or directory
compiling stm32f10x_cec.c...
..\stm32f10x_fwlib\src\stm32f10x_cec.c(23): error:  #5: cannot open source input file "stm32f10x_cec.h": No such file or directory
compiling stm32f10x_crc.c...
..\stm32f10x_fwlib\src\stm32f10x_crc.c(23): error:  #5: cannot open source input file "stm32f10x_crc.h": No such file or directory
compiling stm32f10x_dbgmcu.c...
..\stm32f10x_fwlib\src\stm32f10x_dbgmcu.c(23): error:  #5: cannot open source input file "stm32f10x_dbgmcu.h": No such file or directory
compiling stm32f10x_dma.c...
..\stm32f10x_fwlib\src\stm32f10x_dma.c(23): error:  #5: cannot open source input file "stm32f10x_dma.h": No such file or directory
compiling stm32f10x_exti.c...
..\stm32f10x_fwlib\src\stm32f10x_exti.c(23): error:  #5: cannot open source input file "stm32f10x_exti.h": No such file or directory
compiling stm32f10x_flash.c...
..\stm32f10x_fwlib\src\stm32f10x_flash.c(23): error:  #5: cannot open source input file "stm32f10x_flash.h": No such file or directory
compiling stm32f10x_fsmc.c...
..\stm32f10x_fwlib\src\stm32f10x_fsmc.c(23): error:  #5: cannot open source input file "stm32f10x_fsmc.h": No such file or directory
compiling stm32f10x_gpio.c...
..\stm32f10x_fwlib\src\stm32f10x_gpio.c(23): error:  #5: cannot open source input file "stm32f10x_gpio.h": No such file or directory
compiling stm32f10x_iwdg.c...
..\stm32f10x_fwlib\src\stm32f10x_iwdg.c(23): error:  #5: cannot open source input file "stm32f10x_iwdg.h": No such file or directory
compiling stm32f10x_pwr.c...
..\stm32f10x_fwlib\src\stm32f10x_pwr.c(23): error:  #5: cannot open source input file "stm32f10x_pwr.h": No such file or directory
compiling stm32f10x_rcc.c...
..\stm32f10x_fwlib\src\stm32f10x_rcc.c(23): error:  #5: cannot open source input file "stm32f10x_rcc.h": No such file or directory
compiling stm32f10x_rtc.c...
..\stm32f10x_fwlib\src\stm32f10x_rtc.c(23): error:  #5: cannot open source input file "stm32f10x_rtc.h": No such file or directory
compiling stm32f10x_sdio.c...
..\stm32f10x_fwlib\src\stm32f10x_sdio.c(23): error:  #5: cannot open source input file "stm32f10x_sdio.h": No such file or directory
compiling stm32f10x_spi.c...
..\stm32f10x_fwlib\src\stm32f10x_spi.c(23): error:  #5: cannot open source input file "stm32f10x_spi.h": No such file or directory
compiling stm32f10x_tim.c...
..\stm32f10x_fwlib\src\stm32f10x_tim.c(23): error:  #5: cannot open source input file "stm32f10x_tim.h": No such file or directory
compiling stm32f10x_usart.c...
..\stm32f10x_fwlib\src\stm32f10x_usart.c(23): error:  #5: cannot open source input file "stm32f10x_usart.h": No such file or directory
compiling stm32f10x_wwdg.c...
..\stm32f10x_fwlib\src\stm32f10x_wwdg.c(23): error:  #5: cannot open source input file "stm32f10x_wwdg.h": No such file or directory
compiling stm32f10x_adc.c...
..\stm32f10x_fwlib\src\stm32f10x_adc.c(23): error:  #5: cannot open source input file "stm32f10x_adc.h": No such file or directory
compiling stm32f10x_dac.c...
..\stm32f10x_fwlib\src\stm32f10x_dac.c(23): error:  #5: cannot open source input file "stm32f10x_dac.h": No such file or directory
compiling stm32f10x_i2c.c...
..\stm32f10x_fwlib\src\stm32f10x_i2c.c(23): error:  #5: cannot open source input file "stm32f10x_i2c.h": No such file or directory
Target not created

正点原子 · 发表于 2013-9-17 16:42:24

回复【9楼】WJY0821:
---------------------------------
头文件路劲没加吧。

WJY0821 · 发表于 2013-9-18 01:38:54

急！按照库函数版新建工程，的步骤建立工程，
core\core_cm3.h(90): error:  #5: cannot open source input file "stdint.h": No such file or directory
。。。
\core\core_cm3.c(24): error:  #5: cannot open source input file "stdint.h": No such file or directory

c/c++这项；里面的，Define；这里是输入，STM32F10X_HD,USE_STDPERIPH_DRIVER   吗？

include paths;路径是，\user,   \core  ,  \stm32f10x_fwlib\inc

文件夹
core\包含，core_cm3    ,core_cm3.h    startup_stm32f10x_hd.s  三个文件

stm32f10x_fwlib,包含，inc\  ,src\,两个文件夹

user,包含，main,  startup_stm32f10x_hd,   stm32f10x.h,  stm32f10x_conf.h,,  stm32f10x_it,,, stm32f10x_it.h,,, ,,system_stm32f10x,,,   system_stm32f10x.h   8个文件，

不知道哪里的问题，编译报错

正点原子 · 发表于 2013-9-18 10:44:57

stdint.h，直接去mdk安装目录下搜索。找到后，拷贝到工程/SYSTM/SYS文件夹里面
这个貌似很多朋友装的MDK4.都会出现类似的问题，就是找不到标准库的某个头文件，比较郁闷。

WJY0821 · 发表于 2013-9-18 12:29:24

好的，呵呵谢谢！！~~！

WJY0821 · 发表于 2013-9-18 22:52:52

Library 这个文件， , MDK3.80AA安装文件夹里搜索不到，，，

WJY0821 · 发表于 2013-9-18 23:04:11

想重新下载个，MDK3.80a，百度找了很久都没找到，，有没有连接发个，

WJY0821 · 发表于 2013-9-19 00:47:02

linking...
.\Obj\Hello.axf: Warning: L6373W: libattrs.map file not found in System Library directory C:\Program Files\ARM\ADSv1_2\LIB\armlib\. Library selection may be impaired.
.\Obj\Hello.axf: Warning: L6310W: Unable to find ARM libraries.
.\Obj\Hello.axf: Error: L6411E: No compatible library exists with a definition of startup symbol __main.

找了一下，坛子里面有人遇到和我一样的问题，那个帖子是 http://www.amobbs.com/forum.php? ... ighlight=MDK%2B4.60

把环境变量关于ARM的都改掉，或者不安装ADS1.2就没有问题。也有人说在Release_Notes里面有，

增加环境变量： ARMCC5LIB
变量值：C:\Keil\ARM\ARMCC\lib

请教，这个怎么弄，完全不知道怎么搞。

WJY0821 · 发表于 2013-9-22 14:48:26

重新换到e盘安装就没报错了，，

fighting*_* · 发表于 2014-6-26 14:32:36

回复【12楼】正点原子:
---------------------------------
复制了没用

正点原子 · 发表于 2014-6-26 23:16:28

回复【18楼】fighting*_*:
---------------------------------
报什么错?

小小驴 · 发表于 2014-9-25 21:36:36

我也遇到了这种情况，求解！！！

帐号		自动登录	找回密码
密码			立即注册

编译出错，

原子哥极力推荐 /2