怎么剪切选择有效程序

蓝色阳光 · 发表于 2013-7-11 21:24:09

/**
******************************************************************************
* @file    Project/STM32F10x_StdPeriph_Template/main.c
* @author MCD Application Team
* @version V3.5.0
* @date    08-April-2011
* @brief   Main program body
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32_eval.h"
#include <stdio.h>

#ifdef USE_STM32100B_EVAL
#include "stm32100b_eval_lcd.h"
#elif defined USE_STM3210B_EVAL
#include "stm3210b_eval_lcd.h"
#elif defined USE_STM3210E_EVAL
#include "stm3210e_eval_lcd.h"
#elif defined USE_STM3210C_EVAL
#include "stm3210c_eval_lcd.h"
#elif defined USE_STM32100E_EVAL
#include "stm32100e_eval_lcd.h"
#endif

/** @addtogroup STM32F10x_StdPeriph_Template
* @{
*/

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#ifdef USE_STM32100B_EVAL
#define MESSAGE1   "STM32 MD Value Line "
#define MESSAGE2   " Device running on "
#define MESSAGE3   " STM32100B-EVAL    "
#elif defined (USE_STM3210B_EVAL)
#define MESSAGE1   "STM32 Medium Density"
#define MESSAGE2   " Device running on "
#define MESSAGE3   "   STM3210B-EVAL    "
#elif defined (STM32F10X_XL) && defined (USE_STM3210E_EVAL)
#define MESSAGE1   " STM32 XL Density "
#define MESSAGE2   " Device running on "
#define MESSAGE3   "   STM3210E-EVAL    "
#elif defined (USE_STM3210E_EVAL)
#define MESSAGE1   " STM32 High Density "
#define MESSAGE2   " Device running on "
#define MESSAGE3   "   STM3210E-EVAL    "
#elif defined (USE_STM3210C_EVAL)
#define MESSAGE1   " STM32 Connectivity "
#define MESSAGE2   " Line Device running"
#define MESSAGE3   " on STM3210C-EVAL   "
#elif defined (USE_STM32100E_EVAL)
#define MESSAGE1   "STM32 HD Value Line "
#define MESSAGE2   " Device running on "
#define MESSAGE3   " STM32100E-EVAL    "
#endif

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
USART_InitTypeDef USART_InitStructure;

/* Private function prototypes -----------------------------------------------*/
#ifdef __GNUC__
/* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
set to 'Yes') calls __io_putchar() */
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */

/* Private functions ---------------------------------------------------------*/

/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */

/* Initialize LEDs, Key Button, LCD and COM port(USART) available on
STM3210X-EVAL board ******************************************************/
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);

/* USARTx configured as follow:
        - BaudRate = 115200 baud
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
*/
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;

STM_EVAL_COMInit(COM1, &USART_InitStructure);

/* Initialize the LCD */
#ifdef USE_STM32100B_EVAL
STM32100B_LCD_Init();
#elif defined (USE_STM3210B_EVAL)
STM3210B_LCD_Init();
#elif defined (USE_STM3210E_EVAL)
STM3210E_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
STM3210C_LCD_Init();
#elif defined (USE_STM32100E_EVAL)
STM32100E_LCD_Init();
#endif

/* Display message on STM3210X-EVAL LCD *************************************/
/* Clear the LCD */
LCD_Clear(LCD_COLOR_WHITE);

/* Set the LCD Back Color */
LCD_SetBackColor(LCD_COLOR_BLUE);
/* Set the LCD Text Color */
LCD_SetTextColor(LCD_COLOR_WHITE);
LCD_DisplayStringLine(LCD_LINE_0, (uint8_t *)MESSAGE1);
LCD_DisplayStringLine(LCD_LINE_1, (uint8_t *)MESSAGE2);
LCD_DisplayStringLine(LCD_LINE_2, (uint8_t *)MESSAGE3);

/* Retarget the C library printf function to the USARTx, can be USART1 or USART2
depending on the EVAL board you are using ********************************/
printf("\n\r %s", MESSAGE1);
printf(" %s", MESSAGE2);
printf(" %s\n\r", MESSAGE3);

/* Turn on leds available on STM3210X-EVAL **********************************/
STM_EVAL_LEDOn(LED1);
STM_EVAL_LEDOn(LED2);
STM_EVAL_LEDOn(LED3);
STM_EVAL_LEDOn(LED4);

/* Add your application code here
*/

/* Infinite loop */
while (1)
{
}
}

/**
* @brief Retargets the C library printf function to the USART.
* @param None
* @retval None
*/
PUTCHAR_PROTOTYPE
{
/* Place your implementation of fputc here */
/* e.g. write a character to the USART */
USART_SendData(EVAL_COM1, (uint8_t) ch);

/* Loop until the end of transmission */
while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
{}

return ch;
}

#ifdef USE_FULL_ASSERT

/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

/* Infinite loop */
while (1)
{
}
}
#endif

/**
* @}
*/

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

调试以后出现USER\main.c(24): error: #5: cannot open source input file "stm32_eval.h": No such file or directory
怎么办？