请教一下大虾，我的中断函数EXTI9_5_IRQHandle和EXTI15_10_IRQHandle函数无法进入

jswd

请各位朋友帮看看，我的中断函数EXTI9_5_IRQHandle和EXTI15_10_IRQHandle函数无法进入，我用软仿真看编译后没有对应的汇编，编译等级为0级，谢谢大家！
#include "EXTIX_Init.h"

void EXTIX_Init(void)
{
        GPIO_InitTypeDef GPIO_InitStructure;
        EXTI_InitTypeDef EXTI_InitStructure;
        NVIC_InitTypeDef NVIC_InitStructure;

        RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE);
        GPIO_InitStructure.GPIO_Pin=GPIO_Pin_All;
        GPIO_InitStructure.GPIO_Mode=GPIO_Mode_Out_PP;
        GPIO_InitStructure.GPIO_Speed=GPIO_Speed_10MHz;
        GPIO_Init(GPIOB,&GPIO_InitStructure);

        RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE);
        GPIO_InitStructure.GPIO_Pin=GPIO_Pin_All;
        GPIO_InitStructure.GPIO_Mode=GPIO_Mode_IN_FLOATING;
        GPIO_Init(GPIOA,&GPIO_InitStructure);



        RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO,ENABLE);

        GPIO_EXTILineConfig(GPIO_PortSourceGPIOA,GPIO_PinSource0);

        EXTI_InitStructure.EXTI_Line=EXTI_Line0;
        EXTI_InitStructure.EXTI_Mode=EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger=EXTI_Trigger_Falling;
        EXTI_InitStructure.EXTI_LineCmd=ENABLE;
        EXTI_Init(&EXTI_InitStructure);

        GPIO_EXTILineConfig(GPIO_PortSourceGPIOA,GPIO_PinSource5);

        EXTI_InitStructure.EXTI_Line=EXTI_Line5;
        EXTI_InitStructure.EXTI_Mode=EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger=EXTI_Trigger_Falling;
        EXTI_InitStructure.EXTI_LineCmd=ENABLE;
        EXTI_Init(&EXTI_InitStructure);

        GPIO_EXTILineConfig(GPIO_PortSourceGPIOA,GPIO_PinSource10);

        EXTI_InitStructure.EXTI_Line=EXTI_Line10;
        EXTI_InitStructure.EXTI_Mode=EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger=EXTI_Trigger_Falling;
        EXTI_InitStructure.EXTI_LineCmd=ENABLE;
        EXTI_Init(&EXTI_InitStructure);

        NVIC_InitStructure.NVIC_IRQChannel=EXTI0_IRQn;
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=0x02;
        NVIC_InitStructure.NVIC_IRQChannelSubPriority=0x03;
        NVIC_InitStructure.NVIC_IRQChannelCmd=ENABLE;
        NVIC_Init(&NVIC_InitStructure);

        NVIC_InitStructure.NVIC_IRQChannel=EXTI9_5_IRQn;
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=0x02;
        NVIC_InitStructure.NVIC_IRQChannelSubPriority=0x01;
        NVIC_InitStructure.NVIC_IRQChannelCmd=ENABLE;
        NVIC_Init(&NVIC_InitStructure);

        NVIC_InitStructure.NVIC_IRQChannel=EXTI15_10_IRQn;
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=0x02;
        NVIC_InitStructure.NVIC_IRQChannelSubPriority=0x01;
        NVIC_InitStructure.NVIC_IRQChannelCmd=ENABLE;
        NVIC_Init(&NVIC_InitStructure);
}

void EXTI0_IRQHandler(void)
{
        PBout(0)=!PBout(0);
        EXTI_ClearITPendingBit(EXTI_Line0);
}

void EXTI1_IRQHandler(void)
{
        PBout(1)=!PBout(1);
        EXTI_ClearITPendingBit(EXTI_Line1);
}

void EXTI2_IRQHandler(void)
{
        PBout(2)=!PBout(2);
        EXTI_ClearITPendingBit(EXTI_Line2);
}

void EXTI9_5_IRQHandle(void)
{
        if(EXTI_GetITStatus(EXTI_Line5) !=RESET)
        {
                PBout(5)=!PBout(5);
                EXTI_ClearITPendingBit(EXTI_Line5);
        }
}

void EXTI15_10_IRQHandle(void)
{
        if(EXTI_GetITStatus(EXTI_Line10) !=RESET)
        {
                PBout(10)=!PBout(10);
                EXTI_ClearITPendingBit(EXTI_Line10);
        }
}

正点原子

别开优化吧.
什么编译器版本?

jswd

回复【2楼】正点原子:
---------------------------------
没有开优化，用的是4.7a版本

jswd

请教原子，我程序应该没问题吧

magic_yuan

回复【4楼】jswd:
---------------------------------
今天我搞外部中断也遇到一些问题。用的是原子的程序。好像中断函数名已经固定了，我用PC12作为外部中断，只能调用固定的EXTI15_10_IRQHandle程序，本来我是想PC12单独定义程序的。
  STM32外部中断16个（IO口），其中断函数的名称定义和调试有点迷糊。

jswd

回复【5楼】magic_yuan:
---------------------------------
我的好了，是函数名称错误EXTI15_10_IRQHandle应为EXTI15_10_IRQHandler，另外这个你不必局限于那种开发板，可以用软仿真的