求助，谁有WT588D的一线和三线串口的32例程，或者如何将51单片机的程序转换为32单片机

Iroay · 发表于 2017-8-5 16:19:41

这是c51的
/**************************************************************************
File Name:    main.c
Description:    WT588D test programme
compiler:       Keil C51 9.02a
Author:       LJW
Created:       2011/09/02
Modified:       NO
Revision:       1.0
MCU:          STC10F04
Oscillator Crystal Frequency: 11.0592MHz
***************************************************************************/

/****************************************************/
/*                                                 */
/* Included files                                  */
/*                                                 */
/****************************************************/
#include "STC8051.H"          /* STC8051 definitions    */
#include <Delay.h>

/****************************************************/
/*                                                 */
/* 1ü½Å¶¨òå                   */
/*                                                 */
/****************************************************/
/////////////////////////////////
sbit key1 = P3^7;
sbit key2 = P3^6;
sbit key3 = P2^4;
sbit key4 = P2^3;

sbit LED_OUT = P2^0;
sbit FLAG_OUT = P2^1;

//1Line_A
sbit P_DATA = P0^0; //¶¨òåêy¾Y′«êä¶Ë¿ú¶Ôó|óïòôD¾Æ&#172

03

//3Line_A
sbit P_DATA_3A = P0^0; //¶¨òåêy¾Y′«êä¶Ë¿ú
sbit CS_3A    = P0^1;      //¶¨òåÆ¬Ñ¡DÅoÅ¶Ë¿ú
sbit CLK_3A = P0^2;      //¶¨òåê±Öó¶Ë¿ú

//ò»Ïß￡¬¶tÏß￡¬èyÏßóD1Ø
#define H    1 //¶¨òå1Îa¸ßμçÆ½
#define L 0 //¶¨òå0ÎaμíμçÆ½

//////////////±äá¿/////////////////
//bit flag    = 1;
bit B_DATA; //′«êäêy¾Yò»Î»
unsigned char    SB_DATA = 0; //ò»×Ö½ú1«óÃêy¾Y»o′æÆ÷
unsigned char    S_DATA = 0x00;

/******************************************
¼üÅìé¨Ãèoˉêy
*******************************************/

unsigned char key,key_zhi;

unsigned int ADJ_NUM = 6;
unsigned int S_time = 5;

/*--------------------------------------
;Ä￡¿éÃû3Æ

ine_1A(void)
;1| Äü:êμÏÖò»Ïßμ￥×Ö½úμíÎ»ÔúÇ°′®¿úí¨DÅoˉêy
;èë 2Î:ÎT
;3ö 2Î:0    ·μ»ØÖ÷oˉêy
;-------------------------------------*/
void Line_1A(unsigned char dat)
{
unsigned char i;

//********************************************************

P_DATA = 0;

Delay_1ms(5);    //à-μíÖáéù5ms

B_DATA = dat&0X01;
for(i=0;i<8;i++)
{
P_DATA = 1; //à-¸ßêy¾Y′«êäÏß￡¬×¼±¸′«êäêy¾Y
if(B_DATA==0)
{ /*±íê¾Âß¼-μçÆ½0*/
Delay_10us(20);    // Ñóê±200us
P_DATA = 0;
Delay_10us(20);       // Ñóê±600us
Delay_10us(20);
Delay_10us(20);
}
else
{  /*±íê¾Âß¼-μçÆ½1*/
Delay_10us(20);
Delay_10us(20);
Delay_10us(20);
P_DATA = 0;
Delay_10us(20);
}
dat = dat>>1;
B_DATA = dat&0X01;
}
P_DATA = 1; //à-¸ßμçÆ½
}

/*--------------------------------------
;Ä￡¿éÃû3Æ

ine_3A(void)
;1| Äü:êμÏÖèyÏßμ￥×Ö½úμíÎ»ÔúÇ°′®¿úí¨DÅoˉêyêêóÃóúWT588D
;èë 2Î:ÎT
;3ö 2Î:0    ·μ»ØÖ÷oˉêy
;-------------------------------------*/
void Line_3A(unsigned char dat)
{
unsigned char i,key_copy = 0X00;
P_DATA = 1;
CLK_3A = H;      //à-¸ß

CS_3A= L;    //à-μíÆ¬Ñ¡DÅoÅ
Delay_1ms(5);    //5ms
B_DATA = dat&0X01;

for(i=0;i<8;i++)
{
CLK_3A = L; // à-μí
P_DATA_3A = B_DATA; //′«êäêy¾Yò»Î»

Delay_10us(15);      //Ñóê±150us
CLK_3A = H;      //à-¸ß
Delay_10us(15);         //Ñóê±150us

dat = dat>>1;
B_DATA = dat&0X01;
}
P_DATA_3A  = 1; //à-¸ßμçÆ½
CS_3A  = H;
CLK_3A = H;
}

/*************************************************
  Function:    Main
  Description: Main Function
  Input:       void
  Output:       NULL
  Return:       void
*************************************************/
void main()
{
//P0¿úéèÎa¿aÂ©¼«êä3ö·½ê½
P0M0 = 0xff;
P0M1 = 0xff;
P0 = 0xFF;

//P0¿úéèÎaíÆíìêä3ö·½ê½
P2M0 = 0x01;

P4SW = (1<<6); //P4.6ÎaIO¿ú
P_DATA  = 1; //à-¸ßêy¾Y¶Ë¿ú
P_DATA_3A  = 1; //à-¸ßμçÆ½
CS_3A  = H;
CLK_3A = H;

while(1)
{
if(key1 == 0)
{
Delay_1ms(30);
if(key1 == 0)
{
LED_OUT = !LED_OUT;
ADJ_NUM ++;
//Line_1A(ADJ_NUM);
Line_3A(ADJ_NUM);
}
while(key1 == 0);
}
if(key2 == 0)
{
Delay_1ms(30);
if(key2 == 0)
{
LED_OUT = !LED_OUT;
ADJ_NUM --;
//Line_1A(ADJ_NUM);
Line_3A(ADJ_NUM);
}
while(key2 == 0);
}
Delay_10ms(150);
}

}

/*----------------------------------------------------------------------------
* end of file
*---------------------------------------------------------------------------*/

Iroay · 发表于 2017-8-5 16:20:49

注释有点乱码，不看注释就行了

帐号		自动登录	找回密码
密码			立即注册

求助，谁有WT588D的一线和三线串口的32例程，或者如何将51单片机的程序转换为32单片机

原子哥极力推荐 /2