STM32f429驱动4342 RGBLCD触摸GT9147问题

liweidxh

手贱，更改了GT9147_CFG_TBL，使用的是4.3寸的RGB电容屏，现在触摸不正常了。用了官方的“增值资料-ALIENTEK产品资料-ATK-4342 4.3' RGB屏模块”代码没用，已经将const u8 GT9147_CFG_TBL[]=
{
    0X6A,0XE0,0X01,0X20,0X03,0X05,0X35,0X00,0X02,0X08,
    0X1E,0X08,0X50,0X3C,0X0F,0X05,0X00,0X00,0XFF,0X67,
    0X50,0X00,0X00,0X18,0X1A,0X1E,0X14,0X89,0X28,0X0A,
    0X30,0X2E,0XBB,0X0A,0X03,0X00,0X00,0X02,0X33,0X1D,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X32,0X00,0X00,
    0X2A,0X1C,0X5A,0X94,0XC5,0X02,0X07,0X00,0X00,0X00,
    0XB5,0X1F,0X00,0X90,0X28,0X00,0X77,0X32,0X00,0X62,
    0X3F,0X00,0X52,0X50,0X00,0X52,0X00,0X00,0X00,0X00,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X0F,
    0X0F,0X03,0X06,0X10,0X42,0XF8,0X0F,0X14,0X00,0X00,
    0X00,0X00,0X1A,0X18,0X16,0X14,0X12,0X10,0X0E,0X0C,
    0X0A,0X08,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0X00,0X29,0X28,0X24,0X22,0X20,0X1F,0X1E,0X1D,
    0X0E,0X0C,0X0A,0X08,0X06,0X05,0X04,0X02,0X00,0XFF,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
    0XFF,0XFF,0XFF,0XFF,
};


        if(temp[0]<0X6A)//默认版本比较低,需要更新flash配置
        {
            printf("Default Ver:%d\r\n",temp[0]);
            if(lcddev.id==0X4342)
                                GT9147_Send_Cfg(1);//更新并保存配置
        }

现在写进入还是没用。求大佬帮忙

liweidxh

读了配置寄存器，上面的配置已经写进入了，还是没用。