外部中断实验编译出错 (已经解决了，发现问题了）

mosquito

同一个实验，前天编译通过了没任何问题今天重新打开编译就出问题了，提示是这样的，这是怎么回事
hardware\exti\exti.c(8): error:  #18: expected a ")"
hardware\exti\exti.c(8): error:  #101: "u8" has already been declared in the current scope
hardware\exti\exti.c(18): error:  #18: expected a ")"
hardware\exti\exti.c(18): error:  #247: function "u8" has already been defined
hardware\exti\exti.c(45): error:  #18: expected a ")"
hardware\exti\exti.c(45): error:  #167: argument of type "void (*)(void)" is incompatible with parameter of type "u8"
hardware\exti\exti.c(46): error:  #18: expected a ")"
hardware\exti\exti.c(46): error:  #167: argument of type "void (*)(void)" is incompatible with parameter of type "u8"
hardware\exti\exti.c(48): warning:  #1-D: last line of file ends without a newline

#include"sys.h"
#include"usart.h"
#include"delay.h"
#include"key.h"
#include"exti.h"
#include"led.h"

void EXTI0_IRQChannel(void)
{
   delay_ms(30);
  if(key2==1)
   {
  led0=!led0;
   led1=!led1;
   }
 EXTI->R=1<<0;
 }
void EXTI15_10_IRQChannel(void)
{
 delay_ms(30);
 if(key0==0)
 {
 led0=!led0;
 }
 else if(key1==0)
 {
 led1=!led1;
 }
 EXTI->R=1<<13;
 EXTI->R=1<<15;
}
void EXTIX_Init()
{
 RCC->APB2ENR|=1<<2;
 GPIOA->CRH&=0X0F0FFFFF;
 GPIOA->CRH|=0X80800000;
 GPIOA->IDR&=0X0000A000;
 GPIOA->CRL&=0XFFFFFFF0;
 GPIOA->CRL|=0X00000008;

 Ex_NVIC_Config(GPIO_A,15,FTIR);   //复用IO,触发方式
 Ex_NVIC_Config(GPIO_A,13,FTIR);
 Ex_NVIC_Config(GPIO_A,0,RTIR);

 MY_NVIC_Init(2,2,EXTI0_IRQChannel,2);
 MY_NVIC_Init(2,1,EXTI15_10_IRQChannel,2);

}
就指向红色标注的地方

正点原子

函数名不对.

mosquito

回复【2楼】正点原子:
---------------------------------
谢谢原子， 我后来发现原因了，上次编译的时候发现过，后来改了，结果好像没保存。所以今天拿出来看的时候出现问题了
找了半天没往那想，后来一句句的查发现了