求教，stm32f030 HAL库ad转换问题

wt13568089592

我5通道转换，DMA传输，可是接受数组里只有第一个有第一通道的转换结果。程序在下面，求大神帮忙看看！
uint32_t ADC_ConvertedValue[5]={1,1,1,1,1};
main（）
{
 MX_DMA_Init();
  MX_ADC_Init();
  MX_GPIO_Init();
 HAL_ADC_Start_DMA(&hadc,&ADC_ConvertedValue[0],5);
}
void MX_ADC_Init(void)
{
  ADC_ChannelConfTypeDef sConfig;

    /**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion) 
    */
  hadc.Instance = ADC1;
hadc.Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4;
  hadc.Init.LowPowerAutoWait      = DISABLE;
  hadc.Init.LowPowerAutoPowerOff  = DISABLE;
  hadc.Init.Resolution            = ADC_RESOLUTION_12B;
  hadc.Init.ScanConvMode          = ADC_SCAN_DIRECTION_FORWARD;
  hadc.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
  hadc.Init.ContinuousConvMode    = ENABLE;
  hadc.Init.DiscontinuousConvMode = DISABLE;
  hadc.Init.ExternalTrigConv      = ADC_SOFTWARE_START;
  hadc.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
  hadc.Init.EOCSelection          = ADC_EOC_SINGLE_CONV;
  hadc.Init.DMAContinuousRequests = ENABLE;
  hadc.Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN;
  HAL_ADC_Init(&hadc);
  HAL_ADCEx_Calibration_Start(&hadc);
    /**Configure for the selected ADC regular channel to be converted. 
    */
  sConfig.Channel = ADC_CHANNEL_0;
 // sConfig.Rank =ADC_RANK_NONE;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
  sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
  HAL_ADC_ConfigChannel(&hadc, &sConfig);

    /**Configure for the selected ADC regular channel to be converted. 
    */
  sConfig.Channel = ADC_CHANNEL_1;
//sConfig.Rank =ADC_RANK_CHANNEL_NUMBER;
 // sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
  HAL_ADC_ConfigChannel(&hadc, &sConfig);

    /**Configure for the selected ADC regular channel to be converted. 
    */
  sConfig.Channel = ADC_CHANNEL_2;
  HAL_ADC_ConfigChannel(&hadc, &sConfig);

    /**Configure for the selected ADC regular channel to be converted. 
    */
  sConfig.Channel = ADC_CHANNEL_3;
  HAL_ADC_ConfigChannel(&hadc, &sConfig);

    /**Configure for the selected ADC regular channel to be converted. 
    */
  sConfig.Channel = ADC_CHANNEL_4;
  HAL_ADC_ConfigChannel(&hadc, &sConfig);

}
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{

  GPIO_InitTypeDef GPIO_InitStruct;
  if(hadc->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspInit 0 */

  /* USER CODE END ADC1_MspInit 0 */
    /* Peripheral clock enable */
    __ADC1_CLK_ENABLE();
  
    /**ADC GPIO Configuration    
    PA0     ------> ADC_IN0
    PA1     ------> ADC_IN1
    PA2     ------> ADC_IN2
    PA3     ------> ADC_IN3
    PA4     ------> ADC_IN4 
    */
    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
                          |GPIO_PIN_4;
    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

    /* Peripheral DMA init*/
  
    hdma_adc.Instance = DMA1_Channel1;
    hdma_adc.Init.Direction = DMA_PERIPH_TO_MEMORY;
//hdma_adc.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_adc.Init.PeriphInc = DMA_PINC_ENABLE;
    hdma_adc.Init.MemInc = DMA_MINC_ENABLE;
    hdma_adc.Init.PeriphDataAlignment =DMA_PDATAALIGN_WORD;
    hdma_adc.Init.MemDataAlignment =  DMA_MDATAALIGN_WORD;
    hdma_adc.Init.Mode = DMA_CIRCULAR;
    hdma_adc.Init.Priority = DMA_PRIORITY_VERY_HIGH;
    HAL_DMA_Init(&hdma_adc);

    __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc);

  /* Peripheral interrupt init*/
    HAL_NVIC_SetPriority(ADC1_IRQn, 2, 0);
    HAL_NVIC_EnableIRQ(ADC1_IRQn);
  /* USER CODE BEGIN ADC1_MspInit 1 */

  /* USER CODE END ADC1_MspInit 1 */
  }
}

正点原子

帮顶。。。。。