OpenEdv-开源电子网

 找回密码
 立即注册
正点原子全套STM32/Linux/FPGA开发资料，上千讲STM32视频教程免费下载...
OpenEdv-开源电子网»首页 › 操作系统/图形界面 › Linux › 使用的是stm32mp157的核心板，底板是自己做的，现在需要 ...
返回列表 发新帖
查看: 820|回复: 1

使用的是stm32mp157的核心板，底板是自己做的，现在需要使用spi3,但是用到的管脚和sdmmc1冲突了。求大神指点。

[复制链接]
17883678862

1

主题

1

帖子

0

精华

新手入门

积分
5
金钱
5
注册时间
2021-1-10
在线时间
1 小时
发表于 2023-9-26 21:00:08 | 显示全部楼层 |阅读模式
正点原子逻辑分析仪DL16热卖中，最多16通道，采样率最高可达1GHz，存储深度可达3.5Gbit
1金钱
使用的是stm32mp157的核心板，底板是自己做的，现在需要使用spi3,但是用到的管脚和sdmmc1冲突了。于是就把设备树中sdmmc1的是设备节点dsabled掉了，但是现在系统就启动不了？检查发现“root=/dev/mmcblk2p3 rootwait rw console=ttySTM0,115200”这个启动参数有问题。改成“append: root=/dev/mmcblk1p3 rootwait rw console=ttySTM0,115200”后系统还是起不来？C:\Users\asus\Desktop\xadc\1.pngC:\Users\asus\Desktop\xadc\2.png

  2. TICE:  CPU: STM32MP157AAA Rev.Z
  3. NOTICE:  Model: STMicroelectronics STM32MP157D eval daughter
  4. TICE:  CPU: STM32MP157AAA Rev.Z
  5. NOTICE:  Model: STMicroelectronics STM32MP157D eval daughter
  6. INFO:    Reset reason (0x15):
  7. INFO:      Power-on Reset (rst_por)
  8. INFO:    Using EMMC
  9. INFO:      Instance 2
  10. INFO:    Boot used partition fsbl1
  11. NOTICE:  BL2: v2.2-r1.0(debug):21665c8
  12. NOTICE:  BL2: Built : 04:33:16, Sep  7 2022
  13. INFO:    Using crypto library 'stm32_crypto_lib'
  14. INFO:    BL2: Doing platform setup
  15. INFO:    RAM: DDR3-DDR3L 32bits 533000Khz
  16. INFO:    Memory size = 0x40000000 (1024 MB)
  17. INFO:    BL2 runs SP_MIN setup
  18. INFO:    BL2: Loading image id 4
  19. INFO:    Loading image id=4 at address 0x2ffed000
  20. INFO:    Image id=4 loaded: 0x2ffed000 - 0x2ffff000
  21. INFO:    BL2: Loading image id 5
  22. INFO:    Loading image id=5 at address 0xc0100000
  23. INFO:    STM32 Image size : 867508
  24. INFO:    Image id=5 loaded: 0xc0100000 - 0xc01d3cb4
  25. WARNING: Skip signature check (header option)
  26. NOTICE:  ROTPK is not deployed on platform. Skipping ROTPK verification.
  27. NOTICE:  BL2: Booting BL32
  28. INFO:    Entry point address = 0x2ffed000
  29. INFO:    SPSR = 0x1d3
  30. INFO:    Cannot find st,stpmic1 node in DT
  31. NOTICE:  SP_MIN: v2.2-r1.0(debug):21665c8
  32. NOTICE:  SP_MIN: Built : 04:33:26, Sep  7 2022
  33. INFO:    ARM GICv2 driver initialized
  34. INFO:    stm32mp IWDG1 (12): Secure
  35. INFO:    ETZPC: CRYP1 (9) could be non secure
  36. INFO:    SP_MIN: Initializing runtime services
  37. INFO:    SP_MIN: Preparing exit to normal world


  40. U-Boot 2020.01-stm32mp-r1 (Sep 26 2023 - 04:42:10 -0700)

  42. CPU: STM32MP157AAA Rev.Z
  43. Model: STMicroelectronics STM32MP157D eval daughter
  44. Board: stm32mp1 in trusted mode (st,stm32mp157d-atk)
  45. DRAM:  1 GiB
  46. Clocks:
  47. - MPU : 650 MHz
  48. - MCU : 208.878 MHz
  49. - AXI : 266.500 MHz
  50. - PER : 24 MHz
  51. - DDR : 533 MHz
  52. WDT:   Started with servicing (32s timeout)
  53. NAND:  0 MiB
  54. MMC:   STM32 SD/MMC: 0, STM32 SD/MMC: 1
  55. Loading Environment from MMC... OK
  56. In:    serial
  57. Out:   serial
  58. Err:   serial
  59. Net:   eth0: ethernet@5800a000
  60. lcd_id  = 07
  61. Hit any key to stop autoboot:  0
  62. Boot over mmc1!
  63. *** Warning: old environment U-Boot 2020.01-stm32mp-r1 (Dec 30 2022 - 12:24:48 +0800)
  64. * set default: env default -a; env save; reset
  65. * update current: env set env_ver ${ver}; env save
  66. switch to partitions #0, OK
  67. mmc1(part 0) is current device
  68. 1228872 bytes read in 59 ms (19.9 MiB/s)
  69. Scanning mmc 1:2...
  70. Found /mmc1_extlinux/stm32mp157d-atk_extlinux.conf
  71. Retrieving file: /mmc1_extlinux/stm32mp157d-atk_extlinux.conf
  72. 805 bytes read in 33 ms (23.4 KiB/s)
  73. Select the boot mode
  74. 1:      stm32mp157d-atk
  75. 2:      stm32mp157d-atk-hdmi
  76. 3:      stm32mp157d-atk-spdif
  77. 4:      stm32mp157d-atk-mipi
  78. Enter choice: 1:        stm32mp157d-atk
  79. Retrieving file: /uInitrd
  80. 3632241 bytes read in 111 ms (31.2 MiB/s)
  81. Retrieving file: /uImage
  82. 8381264 bytes read in 215 ms (37.2 MiB/s)
  83. test label->append: root=/dev/mmcblk2p3 rootwait rw console=ttySTM0,115200
  84. test_append: root=/dev/mmcblk1p3 rootwait rw console=ttySTM0,115200
  85. Retrieving file: /stm32mp157d-atk.dtb
  86. 76060 bytes read in 34 ms (2.1 MiB/s)
  87. ## Booting kernel from Legacy Image at c2000000 ...
  88.    Image Name:   Linux-5.4.31
  89.    Created:      2023-09-26   8:54:16 UTC
  90.    Image Type:   ARM Linux Kernel Image (uncompressed)
  91.    Data Size:    8381200 Bytes = 8 MiB
  92.    Load Address: c2000040
  93.    Entry Point:  c2000040
  94.    Verifying Checksum ... OK
  95. ## Flattened Device Tree blob at c4000000
  96.    Booting using the fdt blob at 0xc4000000
  97.    XIP Kernel Image
  98.    Loading Ramdisk to cfc89000, end cffffc71 ... OK
  99.    Loading Device Tree to cfc73000, end cfc8891b ... OK

  101. Starting kernel ...

  103. [    0.000000] Booting Linux on physical CPU 0x0
  104. [    0.000000] Linux version 5.4.31 (uisrc@ubuntu) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #5 SMP PREEMPT Tue Sep 26 01:48:14 PDT 2023
  105. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  106. [    0.000000] CPU: div instructions available: patching division code
  107. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  108. [    0.000000] OF: fdt: Machine model: STMicroelectronics STM32MP157C-DK2 Discovery Board
  109. [    0.000000] Memory policy: Data cache writealloc
  110. [    0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
  111. [    0.000000] OF: reserved mem: initialized node mcuram2@10000000, compatible id shared-dma-pool
  112. [    0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
  113. [    0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
  114. [    0.000000] Reserved memory: created DMA memory pool at 0x10041000, size 0 MiB
  115. [    0.000000] OF: reserved mem: initialized node vdev0vring1@10041000, compatible id shared-dma-pool
  116. [    0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
  117. [    0.000000] OF: reserved mem: initialized node vdev0buffer@10042000, compatible id shared-dma-pool
  118. [    0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
  119. [    0.000000] OF: reserved mem: initialized node mcuram@30000000, compatible id shared-dma-pool
  120. [    0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
  121. [    0.000000] OF: reserved mem: initialized node retram@38000000, compatible id shared-dma-pool
  122. [    0.000000] cma: Reserved 128 MiB at 0xe8000000
  123. [    0.000000] psci: probing for conduit method from DT.
  124. [    0.000000] psci: PSCIv1.1 detected in firmware.
  125. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  126. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  127. [    0.000000] psci: SMC Calling Convention v1.0
  128. [    0.000000] percpu: Embedded 20 pages/cpu s50124 r8192 d23604 u81920
  129. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 227647
  130. [    0.000000] Kernel command line: root=/dev/mmcblk1p3 rootwait rw console=ttySTM0,115200
  131. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  132. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  133. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  134. [    0.000000] Memory: 754628K/917500K available (12288K kernel code, 991K rwdata, 3728K rodata, 1024K init, 230K bss, 31800K reserved, 131072K cma-reserved, 131068K highmem)
  135. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  136. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  137. [    0.000000] rcu:     RCU event tracing is enabled.
  138. [    0.000000]  Tasks RCU enabled.
  139. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  140. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  141. [    0.000000] random: get_random_bytes called from start_kernel+0x31c/0x4f4 with crng_init=0
  142. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  143. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  144. [    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  145. [    0.000026] Switching to timer-based delay loop, resolution 41ns
  146. [    0.001899] Console: colour dummy device 80x30
  147. [    0.001953] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  148. [    0.001974] pid_max: default: 32768 minimum: 301
  149. [    0.002234] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  150. [    0.002260] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  151. [    0.003588] CPU: Testing write buffer coherency: ok
  152. [    0.004122] /cpus/cpu@0 missing clock-frequency property
  153. [    0.004154] /cpus/cpu@1 missing clock-frequency property
  154. [    0.004174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  155. [    0.059801] Setting up static identity map for 0xc0100000 - 0xc0100060
  156. [    0.079776] rcu: Hierarchical SRCU implementation.
  157. [    0.105143] smp: Bringing up secondary CPUs ...
  158. [    0.180435] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  159. [    0.180665] smp: Brought up 1 node, 2 CPUs
  160. [    0.180688] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  161. [    0.180698] CPU: All CPU(s) started in SVC mode.
  162. [    0.181584] devtmpfs: initialized
  163. [    0.210322] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  164. [    0.211019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  165. [    0.211054] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  166. [    0.217829] pinctrl core: initialized pinctrl subsystem
  167. [    0.220321] NET: Registered protocol family 16
  168. [    0.233162] DMA: preallocated 256 KiB pool for atomic coherent allocations
  169. [    0.235710] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  170. [    0.235731] hw-breakpoint: maximum watchpoint size is 8 bytes.
  171. [    0.236168] Serial: AMBA PL011 UART driver
  172. [    0.239385] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
  173. [    0.239438] stm32-pm-domain pm_domain: subdomain core-power-domain registered
  174. [    0.239456] stm32-pm-domain pm_domain: domains probed
  175. [    0.293796] reg-fixed-voltage buck1: Fixed regulator specified with variable voltages
  176. [    0.293838] reg-fixed-voltage: probe of buck1 failed with error -22
  177. [    0.301864] SCSI subsystem initialized
  178. [    0.302755] usbcore: registered new interface driver usbfs
  179. [    0.302849] usbcore: registered new interface driver hub
  180. [    0.302997] usbcore: registered new device driver usb
  181. [    0.303411] pps_core: LinuxPPS API ver. 1 registered
  182. [    0.303423] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email]giometti@linux.it[/email]>
  183. [    0.303457] PTP clock support registered
  184. [    0.303861] EDAC MC: Ver: 3.0.0
  185. [    0.305319] Advanced Linux Sound Architecture Driver Initialized.
  186. [    0.306240] Bluetooth: Core ver 2.22
  187. [    0.306324] NET: Registered protocol family 31
  188. [    0.306336] Bluetooth: HCI device and connection manager initialized
  189. [    0.306357] Bluetooth: HCI socket layer initialized
  190. [    0.306373] Bluetooth: L2CAP socket layer initialized
  191. [    0.306407] Bluetooth: SCO socket layer initialized
  192. [    0.307348] clocksource: Switched to clocksource arch_sys_counter
  193. [    1.057919] thermal_sys: Registered thermal governor 'step_wise'
  194. [    1.058603] NET: Registered protocol family 2
  195. [    1.059729] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  196. [    1.059783] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  197. [    1.059894] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  198. [    1.060078] TCP: Hash tables configured (established 8192 bind 8192)
  199. [    1.060253] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  200. [    1.060321] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  201. [    1.060653] NET: Registered protocol family 1
  202. [    1.061636] RPC: Registered named UNIX socket transport module.
  203. [    1.061656] RPC: Registered udp transport module.
  204. [    1.061666] RPC: Registered tcp transport module.
  205. [    1.061675] RPC: Registered tcp NFSv4.1 backchannel transport module.
  206. [    1.062792] Trying to unpack rootfs image as initramfs...
  207. [    1.447915] Freeing initrd memory: 3548K
  208. [    1.448722] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  209. [    1.451051] Initialise system trusted keyrings
  210. [    1.451477] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  211. [    1.463897] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  212. [    1.465253] NFS: Registering the id_resolver key type
  213. [    1.465307] Key type id_resolver registered
  214. [    1.465317] Key type id_legacy registered
  215. [    1.465340] Installing knfsd (copyright (C) 1996 [email]okir@monad.swb.de[/email]).
  216. [    1.467159] ntfs: driver 2.1.32 [Flags: R/O].
  217. [    1.468177] jffs2: version 2.2. (NAND) &#169; 2001-2006 Red Hat, Inc.
  218. [    1.469028] fuse: init (API version 7.31)
  219. [    1.530256] NET: Registered protocol family 38
  220. [    1.530289] Key type asymmetric registered
  221. [    1.530303] Asymmetric key parser 'x509' registered
  222. [    1.530414] bounce: pool size: 64 pages
  223. [    1.530518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  224. [    1.530534] io scheduler mq-deadline registered
  225. [    1.530546] io scheduler kyber registered
  226. [    1.543688] STM32 USART driver initialized
  227. [    1.550959] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
  228. [    1.567672] brd: module loaded
  229. [    1.582112] loop: module loaded
  230. [    1.589433] libphy: Fixed MDIO Bus: probed
  231. [    1.591541] CAN device driver interface
  232. [    1.594489] PPP generic driver version 2.4.2
  233. [    1.594852] PPP BSD Compression module registered
  234. [    1.594868] PPP Deflate Compression module registered
  235. [    1.594895] PPP MPPE Compression module registered
  236. [    1.594909] NET: Registered protocol family 24
  237. [    1.594964] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  238. [    1.595067] usbcore: registered new interface driver pegasus
  239. [    1.595148] usbcore: registered new interface driver asix
  240. [    1.595208] usbcore: registered new interface driver ax88179_178a
  241. [    1.595264] usbcore: registered new interface driver cdc_ether
  242. [    1.595351] usbcore: registered new interface driver smsc75xx
  243. [    1.595426] usbcore: registered new interface driver smsc95xx
  244. [    1.595485] usbcore: registered new interface driver net1080
  245. [    1.595546] usbcore: registered new interface driver cdc_subset
  246. [    1.595604] usbcore: registered new interface driver zaurus
  247. [    1.595694] usbcore: registered new interface driver cdc_ncm
  248. [    1.597678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  249. [    1.597737] ehci-platform: EHCI generic platform driver
  250. [    1.598311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  251. [    1.598358] ohci-platform: OHCI generic platform driver
  252. [    1.599346] usbcore: registered new interface driver cdc_acm
  253. [    1.599358] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  254. [    1.599472] usbcore: registered new interface driver usb-storage
  255. [    1.599640] usbcore: registered new interface driver option
  256. [    1.599692] usbserial: USB Serial support registered for GSM modem (1-port)
  257. [    1.603169] mousedev: PS/2 mouse device common for all mice
  258. [    1.605713] i2c /dev entries driver
  259. [    1.610858] Bluetooth: HCI UART driver ver 2.3
  260. [    1.610879] Bluetooth: HCI UART protocol H4 registered
  261. [    1.610927] Bluetooth: HCI UART protocol Three-wire (H5) registered
  262. [    1.611076] Bluetooth: HCI UART protocol Broadcom registered
  263. [    1.611167] usbcore: registered new interface driver btusb
  264. [    1.611908] stm32-cpufreq stm32-cpufreq: Failed to get chip info: -517
  265. [    1.616171] sdhci: Secure Digital Host Controller Interface driver
  266. [    1.616186] sdhci: Copyright(c) Pierre Ossman
  267. [    1.616196] Synopsys Designware Multimedia Card Interface Driver
  268. [    1.616916] sdhci-pltfm: SDHCI platform and OF driver helper
  269. [    1.618531] ledtrig-cpu: registered to indicate activity on CPUs
  270. [    1.621140] usbcore: registered new interface driver usbhid
  271. [    1.621156] usbhid: USB HID core driver
  272. [    1.621546] arm-smc-mbox mailbox-0: ARM SMC mailbox enabled.
  273. [    1.621684] arm-smc-mbox mailbox-1: ARM SMC mailbox enabled.
  274. [    1.623566] remoteproc remoteproc0: releasing m4
  275. [    1.627239] Unable to get STM32 DDR PMU clock
  276. [    1.633400] drop_monitor: Initializing network drop monitor service
  277. [    1.633768] NET: Registered protocol family 17
  278. [    1.633803] can: controller area network core (rev 20170425 abi 9)
  279. [    1.633941] NET: Registered protocol family 29
  280. [    1.633960] can: raw protocol (rev 20170425)
  281. [    1.633971] can: broadcast manager protocol (rev 20170425 t)
  282. [    1.633990] can: netlink gateway (rev 20190810) max_hops=1
  283. [    1.634505] Bluetooth: RFCOMM TTY layer initialized
  284. [    1.634551] Bluetooth: RFCOMM socket layer initialized
  285. [    1.634604] Bluetooth: RFCOMM ver 1.11
  286. [    1.634942] lib80211: common routines for IEEE802.11 drivers
  287. [    1.635287] Key type dns_resolver registered
  288. [    1.635485] ThumbEE CPU extension supported.
  289. [    1.635514] Registering SWP/SWPB emulation handler
  290. [    1.635992] registered taskstats version 1
  291. [    1.636006] Loading compiled-in X.509 certificates
  292. [    1.661770] ------------[ cut here ]------------
  293. [    1.661816] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x14c/0x168
  294. [    1.661827] Modules linked in:
  295. [    1.661847] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.31 #5
  296. [    1.661857] Hardware name: STM32 (Device Tree Support)
  297. [    1.661898] [<c0112518>] (unwind_backtrace) from [<c010d7a0>] (show_stack+0x10/0x14)
  298. [    1.661920] [<c010d7a0>] (show_stack) from [<c0cbca34>] (dump_stack+0xb0/0xc4)
  299. [    1.661943] [<c0cbca34>] (dump_stack) from [<c0125a8c>] (__warn+0xd0/0xf8)
  300. [    1.661965] [<c0125a8c>] (__warn) from [<c0125e34>] (warn_slowpath_fmt+0x64/0xc4)
  301. [    1.661988] [<c0125e34>] (warn_slowpath_fmt) from [<c0508180>] (pkcs1pad_verify+0x14c/0x168)
  302. [    1.662011] [<c0508180>] (pkcs1pad_verify) from [<c051d794>] (public_key_verify_signature+0x244/0x2f0)
  303. [    1.662034] [<c051d794>] (public_key_verify_signature) from [<c051ebb4>] (x509_check_for_self_signed+0xb8/0x118)
  304. [    1.662055] [<c051ebb4>] (x509_check_for_self_signed) from [<c051dd54>] (x509_cert_parse+0x168/0x1c8)
  305. [    1.662076] [<c051dd54>] (x509_cert_parse) from [<c051e85c>] (x509_key_preparse+0x10/0x190)
  306. [    1.662101] [<c051e85c>] (x509_key_preparse) from [<c051c284>] (asymmetric_key_preparse+0x54/0xd4)
  307. [    1.662127] [<c051c284>] (asymmetric_key_preparse) from [<c04f5340>] (key_create_or_update+0x120/0x418)
  308. [    1.662153] [<c04f5340>] (key_create_or_update) from [<c11153e0>] (load_system_certificate_list+0xb0/0x108)
  309. [    1.662178] [<c11153e0>] (load_system_certificate_list) from [<c0102fa8>] (do_one_initcall+0x58/0x2b4)
  310. [    1.662202] [<c0102fa8>] (do_one_initcall) from [<c1101110>] (kernel_init_freeable+0x1c8/0x264)
  311. [    1.662226] [<c1101110>] (kernel_init_freeable) from [<c0cd3fd0>] (kernel_init+0x8/0x110)
  312. [    1.662248] [<c0cd3fd0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
  313. [    1.662261] Exception stack(0xe689bfb0 to 0xe689bff8)
  314. [    1.662276] bfa0:                                     00000000 00000000 00000000 00000000
  315. [    1.662294] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  316. [    1.662310] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
  317. [    1.662323] ---[ end trace 93cb2c83ad0d023c ]---
  318. [    1.662359] Problem loading in-kernel X.509 certificate (-22)
  319. [    1.680034] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
  320. [    1.692053] arm-scmi firmware:scmi-0: SCMI Protocol v2.0 'ST:' Firmware version 0x0
  321. [    1.696709] remoteproc remoteproc0: releasing m4
  322. [    1.699086] Unable to get STM32 DDR PMU clock
  323. [    1.716956] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
  324. [    1.727238] debugfs: Directory 'cpu0' with parent 'opp' already present!
  325. [    1.736671] remoteproc remoteproc0: releasing m4
  326. [    1.739346] Unable to get STM32 DDR PMU clock
  327. [    1.780643] stm32-mdma 58000000.dma: STM32 MDMA driver registered
  328. [    1.785077] stm32-dma 48000000.dma: STM32 DMA driver registered
  329. [    1.787297] stm32-dma 48001000.dma: STM32 DMA driver registered
  330. [    1.788120] reg11: supplied by vdd
  331. [    1.788563] reg18: supplied by vdd
  332. [    1.788926] usb33: supplied by regulator-dummy
  333. [    1.794428] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
  334. [    1.814566] random: fast init done
  335. [    1.817778] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
  336. [    1.818984] random: crng init done
  337. [    1.820663] debugfs: Directory 'cpu0' with parent 'opp' already present!
  338. [    1.821624] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-cpufreq-0 failed:-22
  339. [    1.834582] stm32-crc32 58009000.crc: Initialized
  340. [    1.836397] stm32-hash 54002000.hash: will run requests pump with realtime priority
  341. [    1.880154] stm32-hash 54002000.hash: Init HASH done HW ver 23 DMA mode 1
  342. [    1.882615] remoteproc remoteproc0: releasing m4
  343. [    1.885101] stm32-ddr-pmu: probed (ID=0x00140061 VER=0x00000010), DDR@533MHz
  344. [    1.890920] /soc/interrupt-controller@5000d000: bank0
  345. [    1.890943] /soc/interrupt-controller@5000d000: bank1
  346. [    1.890955] /soc/interrupt-controller@5000d000: bank2
  347. [    1.893194] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOA bank added
  348. [    1.893731] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOB bank added
  349. [    1.894197] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOC bank added
  350. [    1.894664] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOD bank added
  351. [    1.895091] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOE bank added
  352. [    1.895576] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOF bank added
  353. [    1.896019] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOG bank added
  354. [    1.896484] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOH bank added
  355. [    1.896926] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOI bank added
  356. [    1.897459] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOJ bank added
  357. [    1.897981] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOK bank added
  358. [    1.898292] stm32mp157-pinctrl soc:pin-controller@50002000: Pinctrl STM32 initialized
  359. [    1.899338] stm32mp157-pinctrl soc:pin-controller-z@54004000: GPIOZ bank added
  360. [    1.899373] stm32mp157-pinctrl soc:pin-controller-z@54004000: Pinctrl STM32 initialized
  361. [    1.900819] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
  362. [    1.903065] stm32-usart 4000f000.serial: interrupt mode for rx (no dma)
  363. [    1.903091] stm32-usart 4000f000.serial: interrupt mode for tx (no dma)
  364. [    1.903129] 4000f000.serial: ttySTM1 at MMIO 0x4000f000 (irq = 60, base_baud = 4000000) is a stm32-usart
  365. [    1.904957] stm32-usart 40010000.serial: interrupt mode for rx (no dma)
  366. [    1.904979] stm32-usart 40010000.serial: interrupt mode for tx (no dma)
  367. [    1.905014] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 61, base_baud = 4000000) is a stm32-usart
  368. [    3.535314] printk: console [ttySTM0] enabled
  369. [    3.541414] stm32-usart 40011000.serial: interrupt mode for rx (no dma)
  370. [    3.546593] stm32-usart 40011000.serial: interrupt mode for tx (no dma)
  371. [    3.553328] 40011000.serial: ttySTM2 at MMIO 0x40011000 (irq = 62, base_baud = 4000000) is a stm32-usart
  372. [    3.564623] stm32-usart 40018000.serial: interrupt mode for rx (no dma)
  373. [    3.569889] stm32-usart 40018000.serial: interrupt mode for tx (no dma)
  374. [    3.576456] 40018000.serial: ttySTM3 at MMIO 0x40018000 (irq = 63, base_baud = 4000000) is a stm32-usart
  375. [    3.591803] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
  376. [    3.602675] m_can_platform 4400e000.can: m_can_platform device registered (irq=57, version=32)
  377. [    3.611899] stm32-dwmac 5800a000.ethernet: PTP uses main clock
  378. [    3.616297] stm32-dwmac 5800a000.ethernet: no reset control found
  379. [    3.622492] stm32-dwmac 5800a000.ethernet: No phy clock provided...
  380. [    3.629349] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
  381. [    3.635681] stm32-dwmac 5800a000.ethernet:   DWMAC4/5
  382. [    3.640723] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
  383. [    3.648053] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
  384. [    3.655319] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
  385. [    3.662240] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
  386. [    3.668528] stm32-dwmac 5800a000.ethernet: TSO supported
  387. [    3.673830] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  388. [    3.681710] stm32-dwmac 5800a000.ethernet: TSO feature enabled
  389. [    3.687872] libphy: stmmac: probed
  390. [    3.698720] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_d not found, using dummy regulator
  391. [    3.706393] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_a not found, using dummy regulator
  392. [    3.847671] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
  393. [    3.854863] dwc2 49000000.usb-otg: DWC OTG Controller
  394. [    3.858830] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 1
  395. [    3.866172] dwc2 49000000.usb-otg: irq 65, io mem 0x49000000
  396. [    3.873147] hub 1-0:1.0: USB hub found
  397. [    3.875612] hub 1-0:1.0: 1 port detected
  398. [    3.881345] ehci-platform 5800d000.usbh-ehci: EHCI Host Controller
  399. [    3.886124] ehci-platform 5800d000.usbh-ehci: new USB bus registered, assigned bus number 2
  400. [    3.895009] ehci-platform 5800d000.usbh-ehci: irq 66, io mem 0x5800d000
  401. [    3.927444] ehci-platform 5800d000.usbh-ehci: USB 2.0 started, EHCI 1.00
  402. [    3.934029] hub 2-0:1.0: USB hub found
  403. [    3.936520] hub 2-0:1.0: 2 ports detected
  404. [    3.961090] stm32f7-i2c 40012000.i2c: doesn't use DMA
  405. [    5.997419] typec_stusb 0-0028: Failed to get port caps: -110
  406. [    6.002019] typec_stusb: probe of 0-0028 failed with error -110
  407. [    6.009798] stm32f7-i2c 40012000.i2c: bus busy
  408. [    6.012796] stm32f7-i2c 40012000.i2c: Trying to recover bus
  409. [    6.018647] fusb302: probe of 0-0022 failed with error -1
  410. [    6.024017] stm32f7-i2c 40012000.i2c: STM32F7 I2C-0 bus adapter
  411. [    6.049788] stm32f7-i2c 40013000.i2c: doesn't use DMA
  412. [    8.077468] edt_ft5x06: probe of 1-0038 failed with error -110
  413. [    8.082601] Goodix-TS 1-0014: 1-0014 supply AVDD28 not found, using dummy regulator
  414. [    8.089770] Goodix-TS 1-0014: 1-0014 supply VDDIO not found, using dummy regulator
  415. [    8.218450] stm32f7-i2c 40013000.i2c: bus busy
  416. [    8.221443] stm32f7-i2c 40013000.i2c: Trying to recover bus
  417. [    8.227037] Goodix-TS 1-0014: i2c test failed attempt 1: -16
  418. [   10.317401] Goodix-TS 1-0014: i2c test failed attempt 2: -110
  419. [   10.357402] Goodix-TS 1-0014: I2C communication failure: -110
  420. [   10.361920] Goodix-TS: probe of 1-0014 failed with error -110
  421. [   10.367737] stm32f7-i2c 40013000.i2c: STM32F7 I2C-1 bus adapter
  422. [   10.393257] stm32f7-i2c 40015000.i2c: doesn't use DMA
  423. [   10.397668] stm32f7-i2c 40015000.i2c: STM32F7 I2C-2 bus adapter
  424. [   10.422626] stm32f7-i2c 5c002000.i2c: doesn't use DMA
  425. [   12.477426] rtc-pcf8563 3-0051: pcf8563_write_block_data: err=-110 addr=0e, data=03
  426. [   12.483653] rtc-pcf8563 3-0051: pcf8563_probe: write error
  427. [   12.489264] rtc-pcf8563: probe of 3-0051 failed with error -5
  428. [   12.495893] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-3 bus adapter
  429. [   12.502548] mmci-pl18x 48004000.sdmmc: mmc0: PL180 manf 53 rev1 at 0x48004000 irq 46,0 (pio)
  430. [   12.537510] mmci-pl18x 58007000.sdmmc: mmc1: PL180 manf 53 rev2 at 0x58007000 irq 53,0 (pio)
  431. [   12.575729] stm32-ipcc 4c001000.mailbox: ipcc rev:1.0 enabled, 6 chans, proc 0
  432. [   12.585669] stm32-rproc mlahb:m4@10000000: wdg irq registered
  433. [   12.591961] remoteproc remoteproc0: m4 is available
  434. [   12.626413] st,stm32-i2s 4000b000.audio-controller: No cache defaults, reading back from HW
  435. [   12.637675] st,stm32-spdifrx 4000d000.audio-controller: No cache defaults, reading back from HW
  436. [   12.655033] panel-simple panel-rgb: panel-rgb supply power not found, using dummy regulator
  437. [   12.670220] stm32f7-i2c 5c002000.i2c: bus busy
  438. [   12.673249] mmc1: switch to bus width 8 failed
  439. [   12.678811] stm32f7-i2c 5c002000.i2c: Trying to recover bus
  440. [   12.684359] cs42l51 3-004a: failed to read I2C
  441. [   12.688131] mmc1: new high speed MMC card at address 0001
  442. [   12.693622] cs42l51: probe of 3-004a failed with error -16
  443. [   12.700173] mmcblk1: mmc1:0001 MK008D 7.50 GiB
  444. [   12.703965] mmcblk1boot0: mmc1:0001 MK008D partition 1 4.00 MiB
  445. [   12.717443] mmcblk1boot1: mmc1:0001 MK008D partition 2 4.00 MiB
  446. [   12.722627] mmcblk1rpmb: mmc1:0001 MK008D partition 3 4.00 MiB, chardev (242:0)
  447. [   12.729759] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  448. [   12.735948] [drm] Driver supports precise vblank timestamp query.
  449. [   12.744560] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
  450. [   12.752486] [drm] Cannot find any crtc or sizes
  451. [   12.763191]  mmcblk1: p1 p2 p3
  452. [   12.765131] [drm] Cannot find any crtc or sizes
  453. [   12.766088] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  454. [   12.778981] hctosys: unable to open rtc device (rtc0)
  455. [   12.783230] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  456. [   12.808994] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  457. [   12.814307] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  458. [   12.822877] 8<--- cut here ---
  459. [   12.825788] Unable to handle kernel NULL pointer dereference at virtual address 00000020
  460. [   12.833912] pgd = 9b7b2b88
  461. [   12.836615] [00000020] *pgd=00000000
  462. [   12.840203] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
  463. [   12.845610] Modules linked in:
  464. [   12.848674] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         5.4.31 #5
  465. [   12.856000] Hardware name: STM32 (Device Tree Support)
  466. [   12.861166] PC is at mp1_mgate_clk_disable_safe+0x38/0x8c
  467. [   12.866571] LR is at mp1_mgate_clk_disable_safe+0x10/0x8c
  468. [   12.871982] pc : [<c05ff73c>]    lr : [<c05ff714>]    psr: 60000093
  469. [   12.878270] sp : e689beb0  ip : 00000000  fp : 00000008
  470. [   12.883509] r10: 0000014d  r9 : c11004a4  r8 : c116e858
  471. [   12.888750] r7 : 00000000  r6 : 00000000  r5 : e6fc5840  r4 : e6fc3c40
  472. [   12.895298] r3 : 00000000  r2 : c1323088  r1 : 00000001  r0 : e6fc3c40
  473. [   12.901850] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
  474. [   12.909096] Control: 10c5387d  Table: e584806a  DAC: 00000051
  475. [   12.914861] Process swapper/0 (pid: 1, stack limit = 0xbe625cc4)
  476. [   12.920886] Stack: (0xe689beb0 to 0xe689c000)
  477. [   12.925257] bea0:                                     60000013 e6fc5840 c12c63f8 00000000
  478. [   12.933468] bec0: c116e858 c05f7324 e6fc5840 e6fb60c0 ffffe000 00000000 c116e858 c05f726c
  479. [   12.941676] bee0: e6fb60c0 c1321ed4 ffffe000 00000000 c116e858 c05f93a0 c12c3a40 c05f9368
  480. [   12.949885] bf00: ffffe000 c0102fa8 00000001 c0168928 c10a2260 c1100400 c0f7fe60 00000000
  481. [   12.958092] bf20: 00000007 00000007 00000000 c0f1d5dc c0f0e804 c0f0e7b8 c1199e10 e7fffe20
  482. [   12.966300] bf40: e7fffe28 c1204e88 cccccccd 00000007 c12f7f00 c1204e88 c116e834 c119aa70
  483. [   12.974508] bf60: c12f7f00 c12f7f00 c116e838 c1101110 00000007 00000007 00000000 c11004a4
  484. [   12.982716] bf80: c0cd3fc8 00000000 c0cd3fc8 00000000 00000000 00000000 00000000 00000000
  485. [   12.990925] bfa0: 00000000 c0cd3fd0 00000000 c01010e8 00000000 00000000 00000000 00000000
  486. [   12.999135] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  487. [   13.007345] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
  488. [   13.015574] [<c05ff73c>] (mp1_mgate_clk_disable_safe) from [<c05f7324>] (clk_disable_unused_subtree+0xdc/0x260)
  489. [   13.025694] [<c05f7324>] (clk_disable_unused_subtree) from [<c05f726c>] (clk_disable_unused_subtree+0x24/0x260)
  490. [   13.035822] [<c05f726c>] (clk_disable_unused_subtree) from [<c05f93a0>] (clk_disable_unused+0x38/0x128)
  491. [   13.045257] [<c05f93a0>] (clk_disable_unused) from [<c0102fa8>] (do_one_initcall+0x58/0x2b4)
  492. [   13.053727] [<c0102fa8>] (do_one_initcall) from [<c1101110>] (kernel_init_freeable+0x1c8/0x264)
  493. [   13.062458] [<c1101110>] (kernel_init_freeable) from [<c0cd3fd0>] (kernel_init+0x8/0x110)
  494. [   13.070666] [<c0cd3fd0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
  495. [   13.078254] Exception stack(0xe689bfb0 to 0xe689bff8)
  496. [   13.083321] bfa0:                                     00000000 00000000 00000000 00000000
  497. [   13.091534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  498. [   13.099741] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
  499. [   13.106380] Code: e5933004 e3530000 18bd81f0 e590606c (e5963020)
  500. [   13.112491] ---[ end trace 93cb2c83ad0d023d ]---
  501. [   13.117121] note: swapper/0[1] exited with preempt_count 1
  502. [   13.122619] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  503. [   13.130312] CPU1: stopping
  504. [   13.133013] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D W         5.4.31 #5
  505. [   13.140340] Hardware name: STM32 (Device Tree Support)
  506. [   13.145511] [<c0112518>] (unwind_backtrace) from [<c010d7a0>] (show_stack+0x10/0x14)
  507. [   13.153275] [<c010d7a0>] (show_stack) from [<c0cbca34>] (dump_stack+0xb0/0xc4)
  508. [   13.160523] [<c0cbca34>] (dump_stack) from [<c0110f50>] (handle_IPI+0x41c/0x448)
  509. [   13.167947] [<c0110f50>] (handle_IPI) from [<c05af83c>] (gic_handle_irq+0x8c/0x90)
  510. [   13.175541] [<c05af83c>] (gic_handle_irq) from [<c0101a8c>] (__irq_svc+0x6c/0xa8)
  511. [   13.183043] Exception stack(0xe68cdf80 to 0xe68cdfc8)
  512. [   13.188117] df80: 00000000 00000ac8 e7671074 c011b7c0 00000001 e68cc000 c1204ea8 c1204ee8
  513. [   13.196326] dfa0: c000406a 410fc075 00000000 00000000 c130ea58 e68cdfd0 c010a1c8 c010a1cc
  514. [   13.204528] dfc0: 60000013 ffffffff
  515. [   13.208032] [<c0101a8c>] (__irq_svc) from [<c010a1cc>] (arch_cpu_idle+0x38/0x3c)
  516. [   13.215458] [<c010a1cc>] (arch_cpu_idle) from [<c01584f0>] (do_idle+0xc4/0x14c)
  517. [   13.222792] [<c01584f0>] (do_idle) from [<c0158864>] (cpu_startup_entry+0x18/0x1c)
  518. [   13.230389] [<c0158864>] (cpu_startup_entry) from [<c010268c>] (__enable_mmu+0x0/0x14)
  519. [   13.238336] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
复制代码

2.png
1.png

log.zip

11.94 KB, 下载次数: 2
正点原子逻辑分析仪DL16劲爆上市
回复

使用道具 举报

212545012

1

主题

2

帖子

0

精华

新手入门

积分
8
金钱
8
注册时间
2023-2-7
在线时间
1 小时
发表于 2024-1-12 23:41:15 | 显示全部楼层
正点原子ESP32 AI开发套件上市，python
最少要引出哪些接口给地板，核心板才能启动
回复

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则



关闭

原子哥极力推荐上一条 /2 下一条

正点原子公众号

QQ|手机版|OpenEdv-开源电子网 ( 粤ICP备12000418号-1 )

GMT+8, 2024-11-22 11:56

Powered by OpenEdv-开源电子网

© 2001-2030 OpenEdv-开源电子网

快速回复 返回顶部 返回列表