【求助】linux启动过程中不停重启

大尬猴

系统不停重启，请教下

串口查看打印输出。

用sd卡启动系统，每次打印 Starting kernel log daemon... 后重启

1. Starting Xserver
   
2. Starting system message bus: dbus.
   
3. Starting Connection Manager
   
4. Starting Dropbear SSH server: dropbear.
   
5. Starting rpcbind daemon...[   10.923968] fec 2188000.ethernet eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=20b4000.ethernet:02, irq=-1)
   
6. done.
   
7. [   11.003854] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
   
8. starting statd: done
   
9. Starting advanced power management daemon: apmd.
   
10. apmd[588]: apmd 3.2.1 interfacing with apm driver 1.13 and APM BIOS 1.2
    
11. Starting atd: OK
    
12. exportfs: can't open /etc/exports for reading
    
13. NFS daemon support not enabled in kernel
    
14. Starting system log daemon...0
    
15. Starting kernel log daemon...
    
16. 
    
17. U-Boot 2016.03 (Nov 28 2022 - 23:46:05 -0800)
    
18. 
    
19. CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
    
20. CPU:   Industrial temperature grade (-40C to 105C) at 42C

复制代码

用emmc启动系统，每次启动完后打印 ICM20608 ID = 0XAE 然后重启

1. Starting system log daemon...0
   
2. Starting kernel log daemon...0
   
3. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon                       [ ok ]
   
4. Starting Telephony daemon
   
5. Starting Linux NFC daemon
   
6. * starting FTP Server: vsftpd... done.
   
7. Starting crond: OK
   
8. Starting nginx: nginx.
   
9. Running local boot scripts (/etc/rc.local).
   
10. 
    
11. root@ATK-IMX6U:~# [   17.737946] ICM20608 ID = 0XAE
    
12. 
    
13. 
    
14. U-Boot 2016.03-g0ae7e33 (Aug 14 2022 - 19:42:45 +0800)
    
15. 
    
16. CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)

复制代码

用“NXP官方原版MFG_TOOL烧写工具”烧录emmc启动，则没有问题。

每次重启时都会“嗒”一声，不知道是否硬件问题？

正点原子

帮顶