USMART_Config（）配置问题

1021256354

原子哥：问问一个问题：USMart_config（）中
(void*)write_addr,"void write_addr(u32 addr,u32 val)"或者是(void*)delay_ms,"void delay_ms(u16 nms)"；前面的函数指针可以找到函数体，但是双引号中的定义的函数连接不到，不知道怎么回事？提示没有定义void delay_ms(u16 nms)；但是确实定义了，

正点原子

编译器报什么问题?

1021256354

回复【2楼】正点原子:
---------------------------------
Source Browser:"void delya_ms(u16 nms)"is undefined!

正点原子

在config.h里面，添加：
 #include “delay.h”

1021256354

没有USMart_config.h这个文件

正点原子

[mw_shl_code=c,true]#include "usmart.h" #include "usmart_str.h" ////////////////////////////用户配置区/////////////////////////////////////////////// //这下面要包含所用到的函数所申明的头文件(用户自己添加) #include "delay.h" #include "usart.h" #include "sys.h" #include "wm8978.h" #include "malloc.h" #include "fattester.h" //函数名列表初始化(用户自己添加) //用户直接在这里输入要执行的函数名及其查找串 struct _m_usmart_nametab usmart_nametab[]= { #if USMART_USE_WRFUNS==1 //如果使能了读写操作 (void*)read_addr,"u32 read_addr(u32 addr)", (void*)write_addr,"void write_addr(u32 addr,u32 val)", #endif (void*)delay_ms,"void delay_ms(u16 nms)", (void*)delay_us,"void delay_us(u32 nus)", (void*)mem_perused,"u8 mem_perused(u8 memx)", (void*)mf_scan_files,"u8 mf_scan_files(u8 * path)", (void*)WM8978_Write_Reg,"void WM8978_Write_Reg(u8 reg,u8 val)", (void*)WM8978_Read_Reg,"u8 WM8978_Read_Reg(u8 reg)", (void*)WM8978_HPvol_Set,"void WM8978_HPvol_Set(u8 voll,u8 volr)", (void*)WM8978_SPKvol_Set,"void WM8978_SPKvol_Set(u8 volx)", (void*)WM8978_3D_Set,"void WM8978_3D_Set(u8 depth)", (void*)WM8978_EQ_3D_Dir,"void WM8978_EQ_3D_Dir(u8 dir)", (void*)WM8978_EQ1_Set,"void WM8978_EQ1_Set(u8 cfreq,u8 gain)", (void*)WM8978_EQ2_Set,"void WM8978_EQ2_Set(u8 cfreq,u8 gain)", (void*)WM8978_EQ3_Set,"void WM8978_EQ3_Set(u8 cfreq,u8 gain)", (void*)WM8978_EQ4_Set,"void WM8978_EQ4_Set(u8 cfreq,u8 gain)", (void*)WM8978_EQ5_Set,"void WM8978_EQ5_Set(u8 cfreq,u8 gain)", }; [/mw_shl_code]

说错,是在usmart_config.c里面.