用STM32板子自定义的HID设备（一直向PC发送20个字节数据）， 每次用上位机程序枚举不到该设备

yang1020

             
    经测试发现，每次用VC的上位机程序枚举不到  自定义的hid 设备， 是因为报告描述Joystick_ReportDescriptor 不正确，

我找的些例子换过几个，都是枚举不到，要是换成一个键盘（报告描述），就可以枚举到。     有没有人指点下    自定义HID的 报告描述的正确写法啊。   

 

 

 

正点原子

帮顶

jimmjimm

const uint8_t CustomHID_ReportDescriptor[CUSTOMHID_SIZ_REPORT_DESC] =
  {                    
    0x06, 0xFF, 0x00,      /* USAGE_PAGE (Vendor age: 0xFF00) */                       
    0x09, 0x01,            /* USAGE (Demo Kit)               */    
    0xa1, 0x01,            /* COLLECTION (Application)       */            
    /* 6 */
    
    /* Led 1 */        
    0x85, 0x01,            /*     REPORT_ID (1)      */
    0x09, 0x01,            /*     USAGE (LED 1)              */
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */          
    0x25, 0x01,            /*     LOGICAL_MAXIMUM (1)        */           
    0x75, 0x08,            /*     REPORT_SIZE (8)            */        
    0x95, 0x01,            /*     REPORT_COUNT (1)           */       
    0xB1, 0x82,             /*    FEATURE (Data,Var,Abs,Vol) */     

    0x85, 0x01,            /*     REPORT_ID (1)              */
    0x09, 0x01,            /*     USAGE (LED 1)              */
    0x91, 0x82,            /*     OUTPUT (Data,Var,Abs,Vol)  */
    /* 26 */
    
    /* Led 2 */
    0x85, 0x02,            /*     REPORT_ID 2      */
    0x09, 0x02,            /*     USAGE (LED 2)              */
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */          
    0x25, 0x01,            /*     LOGICAL_MAXIMUM (1)        */           
    0x75, 0x08,            /*     REPORT_SIZE (8)            */        
    0x95, 0x01,            /*     REPORT_COUNT (1)           */       
    0xB1, 0x82,             /*    FEATURE (Data,Var,Abs,Vol) */     

    0x85, 0x02,            /*     REPORT_ID (2)              */
    0x09, 0x02,            /*     USAGE (LED 2)              */
    0x91, 0x82,            /*     OUTPUT (Data,Var,Abs,Vol)  */
    /* 46 */
    
    /* Led 3 */        
    0x85, 0x03,            /*     REPORT_ID (3)      */
    0x09, 0x03,            /*     USAGE (LED 3)              */
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */          
    0x25, 0x01,            /*     LOGICAL_MAXIMUM (1)        */           
    0x75, 0x08,            /*     REPORT_SIZE (8)            */        
    0x95, 0x01,            /*     REPORT_COUNT (1)           */       
    0xB1, 0x82,             /*    FEATURE (Data,Var,Abs,Vol) */     

    0x85, 0x03,            /*     REPORT_ID (3)              */
    0x09, 0x03,            /*     USAGE (LED 3)              */
    0x91, 0x82,            /*     OUTPUT (Data,Var,Abs,Vol)  */
    /* 66 */
    
    /* Led 4 */
    0x85, 0x04,            /*     REPORT_ID 4)      */
    0x09, 0x04,            /*     USAGE (LED 4)              */
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */          
    0x25, 0x01,            /*     LOGICAL_MAXIMUM (1)        */           
    0x75, 0x08,            /*     REPORT_SIZE (8)            */        
    0x95, 0x01,            /*     REPORT_COUNT (1)           */       
    0xB1, 0x82,            /*     FEATURE (Data,Var,Abs,Vol) */     

    0x85, 0x04,            /*     REPORT_ID (4)              */
    0x09, 0x04,            /*     USAGE (LED 4)              */
    0x91, 0x82,            /*     OUTPUT (Data,Var,Abs,Vol)  */
    /* 86 */
    
    /* key ush Button */  
    0x85, 0x05,            /*     REPORT_ID (5)              */
    0x09, 0x05,            /*     USAGE (Push Button)        */      
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */      
    0x25, 0x01,            /*     LOGICAL_MAXIMUM (1)        */      
    0x75, 0x01,            /*     REPORT_SIZE (1)            */  
    0x81, 0x82,            /*     INPUT (Data,Var,Abs,Vol)   */   
    
    0x09, 0x05,            /*     USAGE (Push Button)        */               
    0x75, 0x01,            /*     REPORT_SIZE (1)            */           
    0xb1, 0x82,            /*     FEATURE (Data,Var,Abs,Vol) */  
         
    0x75, 0x07,            /*     REPORT_SIZE (7)            */           
    0x81, 0x83,            /*     INPUT (Cnst,Var,Abs,Vol)   */                    
    0x85, 0x05,            /*     REPORT_ID (2)              */         
                    
    0x75, 0x07,            /*     REPORT_SIZE (7)            */           
    0xb1, 0x83,            /*     FEATURE (Cnst,Var,Abs,Vol) */                      
    /* 114 */

    /* Tamper ush Button */  
    0x85, 0x06,            /*     REPORT_ID (6)              */
    0x09, 0x06,            /*     USAGE (Tamper ush Button) */      
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */      
    0x25, 0x01,            /*     LOGICAL_MAXIMUM (1)        */      
    0x75, 0x01,            /*     REPORT_SIZE (1)            */  
    0x81, 0x82,            /*     INPUT (Data,Var,Abs,Vol)   */   
    
    0x09, 0x06,            /*     USAGE (Tamper ush Button) */               
    0x75, 0x01,            /*     REPORT_SIZE (1)            */           
    0xb1, 0x82,            /*     FEATURE (Data,Var,Abs,Vol) */  
         
    0x75, 0x07,            /*     REPORT_SIZE (7)            */           
    0x81, 0x83,            /*     INPUT (Cnst,Var,Abs,Vol)   */                    
    0x85, 0x06,            /*     REPORT_ID (6)              */         
                    
    0x75, 0x07,            /*     REPORT_SIZE (7)            */           
    0xb1, 0x83,            /*     FEATURE (Cnst,Var,Abs,Vol) */  
    /* 142 */
    
    /* ADC IN */
    0x85, 0x07,            /*     REPORT_ID (7)              */         
    0x09, 0x07,            /*     USAGE (ADC IN)             */          
    0x15, 0x00,            /*     LOGICAL_MINIMUM (0)        */               
    0x26, 0xff, 0x00,      /*     LOGICAL_MAXIMUM (255)      */                 
    0x75, 0x08,            /*     REPORT_SIZE (8)            */           
    0x81, 0x82,            /*     INPUT (Data,Var,Abs,Vol)   */                    
    0x85, 0x07,            /*     REPORT_ID (7)              */                 
    0x09, 0x07,            /*     USAGE (ADC in)             */                     
    0xb1, 0x82,            /*     FEATURE (Data,Var,Abs,Vol) */                                 
    /* 161 */

    0xc0            /*     END_COLLECTION              */
  }; /* CustomHID_ReportDescriptor */


自定义HID的报告描述符

yang1020

谢谢，楼上兄弟指点， 现在改的可以枚举到设备了，   目的是想让它（HID设备），不停的向PC发送20个字节的数据，  但是现在连上PC后，  用USB调试工具， 确怎么都没有数据（PC收不到HID设备数据）

xinjie1023

最近我也在研究一次传输更多字节问题，还没解决。