由字模文件查看字体设置特性

温柔的郎

各位大神们，在STM32F407驱动LCD显示中文字体时，可以在PCToLCD2002软件里设置字体特性，然后生成字模。
那遇到一些字模文件，想要添加一些相同特性的字模文件，需要知道这字体的设置特性，有什么方法吗？？
请由知道的大神指点指点！！感谢感谢！！
如下,是一些24x24字体的字模文件，想要知道这些字体的设置参数，如何才能知道。
typedef struct
{
       unsigned char Index[2];       
       char Msk[72];
}typFNT_GB24;
//字体取模：宋体常规小四
//逐行式，顺向（高位在前）
const typFNT_GB24 tfont24[]=
{
"深",0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x08,0x00,0x08,0x0C,0x7F,0xFC,0x04,
0x40,0x10,0x01,0xC8,0xA0,0x02,0x18,0x60,0x42,0x30,0x18,0x32,0x23,0x18,0x12,0xC3,
0x00,0x14,0x03,0x00,0x04,0x03,0x0C,0x04,0x7F,0xF0,0x08,0x0F,0x80,0x08,0x0B,0x40,
0x78,0x13,0x60,0x18,0x33,0x20,0x18,0x63,0x18,0x18,0x83,0x1C,0x19,0x03,0x08,0x18,
0x03,0x00,0x00,0x03,0x00,0x00,0x00,0x00,/*0*/
"圳",0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x10,0x0C,0x04,0x18,0x0C,0x04,0x10,0x8C,0x04,
0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0xD0,0x8C,0x3F,0x10,0x8C,0x04,0x10,
0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,
0x05,0xF0,0x8C,0x0E,0x20,0x8C,0x78,0x20,0x8C,0x20,0x40,0x8C,0x00,0x80,0x8C,0x01,
0x00,0x0C,0x02,0x00,0x0C,0x00,0x00,0x00,/*1*/
"市",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x18,0x00,0x00,0x18,0x08,0x00,
0x00,0x1C,0x1F,0xFF,0xE0,0x00,0x18,0x00,0x00,0x18,0x20,0x07,0xFF,0xF0,0x04,0x18,
0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,
0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0xE0,0x04,0x18,0x40,0x00,
0x18,0x00,0x00,0x18,0x00,0x00,0x00,0x00,/*2*/

}



这是PCToLCD2002字体取模软件的设置界面，根据上面的字模文件，如何知道字模软件的设置参数。

gjs13030247996

帮顶一下

nashui_sx

大家都是用的这个软件呀  你这个选的应该就给他的一样把