OpenEdv-开源电子网

 找回密码
 立即注册
正点原子全套STM32/Linux/FPGA开发资料,上千讲STM32视频教程免费下载...
查看: 1005|回复: 0

lwip 内存管理函数中的疑问部分

[复制链接]

8

主题

23

帖子

0

精华

初级会员

Rank: 2

积分
128
金钱
128
注册时间
2017-10-27
在线时间
35 小时
发表于 2021-9-22 16:33:11 | 显示全部楼层 |阅读模式
本帖最后由 maqiufeng 于 2021-9-28 11:29 编辑

struct pbuf *
pbuf_alloc(pbuf_layer layer, u16_t length, pbuf_type type)
{
  struct pbuf *p, *q, *r;
  u16_t offset;
  s32_t rem_len; /* remaining length */
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F")\n", length));

  /* determine header offset */
  switch (layer) {
  case PBUF_TRANSPORT:
    /* add room for transport (often TCP) layer header */
    offset = PBUF_LINK_HLEN + PBUF_IP_HLEN + PBUF_TRANSPORT_HLEN;
    break;
  case PBUF_IP:
    /* add room for IP layer header */
    offset = PBUF_LINK_HLEN + PBUF_IP_HLEN;
    break;
  case PBUF_LINK:
    /* add room for link layer header */
    offset = PBUF_LINK_HLEN;
    break;
  case PBUF_RAW:
    offset = 0;
    break;
  default:
    LWIP_ASSERT("pbuf_alloc: bad pbuf layer", 0);
    return NULL;
  }

  switch (type) {
  case PBUF_POOL:
    /* allocate head of pbuf chain into p */
    p = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc: allocated pbuf %p\n", (void *)p));
    if (p == NULL) {
      PBUF_POOL_IS_EMPTY();
      return NULL;
    }
    p->type = type;
    p->next = NULL;

    /* make the payload pointer point 'offset' bytes into pbuf data memory */
    p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + (SIZEOF_STRUCT_PBUF + offset)));
    LWIP_ASSERT("pbuf_alloc: pbuf p->payload properly aligned",
            ((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
    /* the total length of the pbuf chain is the requested size */
    p->tot_len = length;
    /* set the length of the first pbuf in the chain */
    p->len = LWIP_MIN(length, PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset));
    LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
                ((u8_t*)p->payload + p->len <=
                 (u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
    LWIP_ASSERT("PBUF_POOL_BUFSIZE must be bigger than MEM_ALIGNMENT",
      (PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset)) > 0 );
    /* set reference count (needed here in case we fail) */
    p->ref = 1;

    /* now allocate the tail of the pbuf chain */

    /* remember first pbuf for linkage in next iteration */
    r = p;
    /* remaining length to be allocated */
    rem_len = length - p->len;
    /* any remaining pbufs to be allocated? */
    while (rem_len > 0) {
      q = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
      if (q == NULL) {
        PBUF_POOL_IS_EMPTY();
        /* free chain so far allocated */
        pbuf_free(p);
        /* bail out unsuccesfully */
        return NULL;
      }
      q->type = type;
      q->flags = 0;
      q->next = NULL;
      /* make previous pbuf point to this pbuf */
      r->next = q;
      /* set total length of this pbuf and next in chain */
      LWIP_ASSERT("rem_len < max_u16_t", rem_len < 0xffff);
      q->tot_len = (u16_t)rem_len;
      /* this pbuf length is pool size, unless smaller sized tail */
      q->len = LWIP_MIN((u16_t)rem_len, PBUF_POOL_BUFSIZE_ALIGNED);
      q->payload = (void *)((u8_t *)q + SIZEOF_STRUCT_PBUF);
      LWIP_ASSERT("pbuf_alloc: pbuf q->payload properly aligned",
              ((mem_ptr_t)q->payload % MEM_ALIGNMENT) == 0);
      LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
                  ((u8_t*)p->payload + p->len <=
                   (u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
      q->ref = 1;
      /* calculate remaining length to be allocated */
      rem_len -= q->len;
      /* remember this pbuf for linkage in next iteration */
      r = q;
    }
    /* end of chain */
    /*r->next = NULL;*/

    break;
  case PBUF_RAM:
    /* If pbuf is to be allocated in RAM, allocate memory for it. */
    p = (struct pbuf*)mem_malloc(LWIP_MEM_ALIGN_SIZE(SIZEOF_STRUCT_PBUF + offset) + LWIP_MEM_ALIGN_SIZE(length));
    if (p == NULL) {
      return NULL;
    }
    /* Set up internal structure of the pbuf. */
    p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + SIZEOF_STRUCT_PBUF + offset));
    p->len = p->tot_len = length;
    p->next = NULL;
    p->type = type;

    LWIP_ASSERT("pbuf_alloc: pbuf->payload properly aligned",
           ((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
    break;
  /* pbuf references existing (non-volatile static constant) ROM payload? */
  case PBUF_ROM:
  /* pbuf references existing (externally allocated) RAM payload? */
  case PBUF_REF:
    /* only allocate memory for the pbuf structure */
    p = (struct pbuf *)memp_malloc(MEMP_PBUF);
    if (p == NULL) {
      LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
                  ("pbuf_alloc: Could not allocate MEMP_PBUF for PBUF_%s.\n",
                  (type == PBUF_ROM) ? "ROM" : "REF"));
      return NULL;
    }
    /* caller must set this field properly, afterwards */
    p->payload = NULL;
    p->len = p->tot_len = length;
    p->next = NULL;
    p->type = type;
    break;
  default:
    LWIP_ASSERT("pbuf_alloc: erroneous type", 0);
    return NULL;
  }
  /* set reference count */
  p->ref = 1;
  /* set flags */
  p->flags = 0;
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F") == %p\n", length, (void *)p));
  return p;
}


疑问部分红色字体,第二个pbuf 一般由pbuf结构体和payload数据组成,假如pbuf大小512字节,那 q->len 不应该是PBUF_POOL_BUFSIZE_ALIGNED-结构体的长度吗,而程序中却是直接PBUF_POOL_BUFSIZE_ALIGNED 即512字节

正点原子逻辑分析仪DL16劲爆上市
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则



关闭

原子哥极力推荐上一条 /2 下一条

正点原子公众号

QQ|手机版|OpenEdv-开源电子网 ( 粤ICP备12000418号-1 )

GMT+8, 2025-5-5 21:42

Powered by OpenEdv-开源电子网

© 2001-2030 OpenEdv-开源电子网

快速回复 返回顶部 返回列表