STM32F101C8T6 JTAG SWD 调试问题

xwyfx

我的板子是STM32F101C8T6 的，   连接好了JLink 到 SWD的四根线 ，我直接用战舰开发板的模板工程，然后在工程设置里修改了cpu的型号，条件编译参数，替换了工程里的启动文件，编译通过，调试的时候出错，下面是调试信息

Program Size: Code=4988 RO-data=268 RW-data=52 ZI-data=1836 
FromELF: creating hex file...
"..\OBJ\Template.axf" - 0 Error(s), 0 Warning(s).
Load "..\\OBJ\\Template.axf"
Set JLink Project File to "E:\STM32\test2\USER\JLinkSettings.ini"
* JLink Info: Device "STM32F101C8" selected (64 KB flash, 10 KB RAM).
 
JLink info:
------------
DLL: V4.62 , compiled Jan 25 2013 15:19:47
Firmware: J-Link ARM V8 compiled Nov 14 2012 22:34:52
Hardware: V8.00
S/N : 17935099
Feature(s) : RDI,FlashDL,FlashBP,JFlash
 
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: Found Cortex-M3 r1p1, Little endian.
ROMTableAddr = 0xE00FF003

我是新手，求各位大神帮我看看

wobukansanguo

是不是没加入programming algorithm，另外你用4线SWD在复位那个地方得勾选内核复位

xwyfx

回复【2楼】wobukansanguo:
---------------------------------
SW的时钟设置为100Khz就可以了