新人求助，按照文档qt移植1.2pdf出现这一问题，百度也没有解决，有没有大佬告诉我到底错在哪

来拿buff

当输入./autoconfigure.sh后
出现以下信息
+ cd qtbase
+ /home/liuxu/qt5.5.1/qt-everywhere-opensource-src-5.5.1/qtbase/configure -top-level -prefix /home/liuxu/qt5.5.1/qt-everywhere-opensource-src-5.5.1/arm-qt -confirm-license -opensource -shared -release -make libs -xplatform linux-arm-gnueabi-g++ -optimized-qmake -pch -qt-sql-sqlite -qt-libjpeg -qt-libpng -qt-zlib -no-opengl -no-sse2 -no-openssl -no-cups -no-glib -no-dbus -no-xcb -no-xcursor -no-xfixes -no-xrandr -no-xrender -no-separate-debug-info -no-fontconfig -nomake examples -nomake tools -nomake tests -no-iconv -tslib -I/home/liuxu/tslib/arm-tslib/include -L/home/liuxu/tslib/arm-tslib/lib

This is the Qt Open Source Edition.

You are licensed to use this software under the terms of
the Lesser GNU General Public License (LGPL) versions 2.1.
You are also licensed to use this software under the terms of
the GNU Lesser General Public License (LGPL) versions 3.

You have already accepted the terms of the Open Source license.

Creating qmake...
.Done.
Running configuration tests...
Failed to process makespec for platform 'linux-arm-gnueabi-g++'
Turn on verbose messaging (-v) to see the final report.


qmake.conf文档配置如下
1 #
  2 # qmake configuration for building with arm-linux-gnueabi-g++
  3 #
  4
  5 MAKEFILE_GENERATOR      = UNIX
  6 CONFIG                 += incremental
  7 QMAKE_INCREMENTAL_STYLE = sublib
  8
  9 QT_QPA_DEFAULT_PLATFORM=linuxfb
10 QMAKE_CFLAGS += -O2 -march=armv7-a -mtune=cortex-a7 -mfpu=neon -mfloat-abi=hard
11 QMAKE_CXXFLAGS += -O2 -march=armv7-a -mtune=cortex-a7 -mfpu=neon -mfloat-abi=hard
12
13 include(../common/linux.conf)
14 include(../common/gcc-base-unix.conf)
15 include(../common/g++-unix.conf)
16
17 # modifications to g++.conf
18 QMAKE_CC                =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-gcc
19 QMAKE_CXX               =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++
20 QMAKE_LINK              =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++
21 QMAKE_LINK_SHLIB        =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++
22
23 # modifications to linux.conf
24 QMAKE_AR                =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ar cqs
25 QMAKE_OBJCOPY           =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-objcopy
26 QMAKE_NM                =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-nm -P
27 QMAKE_STRIP             =/home/liuxu/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-strip
28 load(qt_config)

autoconfigure.sh文档如下
  1 #!/bin/sh
  2 ./configure \
  3     -prefix /home/liuxu/qt5.5.1/qt-everywhere-opensource-src-5.5.1/arm-qt \
  4     -confirm-license \
  5     -opensource \
  6     -shared \
  7     -release  \
  8     -make libs \
  9     -xplatform linux-arm-gnueabi-g++ \
10     -optimized-qmake \
11     -pch \
12     -qt-sql-sqlite \
13     -qt-libjpeg \
14     -qt-libpng \
15     -qt-zlib \
16     -no-opengl \
17     -no-sse2 \
18     -no-openssl \
19     -no-cups \
20     -no-glib \
21     -no-dbus \
22     -no-xcb \
23     -no-xcursor -no-xfixes -no-xrandr -no-xrender \
24     -no-separate-debug-info \
25     -no-fontconfig \
26     -nomake examples -nomake tools -nomake tests -no-iconv \
27     -tslib \
28     -I/home/liuxu/tslib/arm-tslib/include \
29     -L/home/liuxu/tslib/arm-tslib/lib
30 exit

当我输入当输入./autoconfigure.sh后
出现
+ cd qtbase
+ /home/liuxu/qt5.5.1/qt-everywhere-opensource-src-5.5.1/qtbase/configure -top-level -prefix /home/liuxu/qt5.5.1/qt-everywhere-opensource-src-5.5.1/arm-qt -confirm-license -opensource -shared -release -make libs -xplatform linux-arm-gnueabi-g++ -optimized-qmake -pch -qt-sql-sqlite -qt-libjpeg -qt-libpng -qt-zlib -no-opengl -no-sse2 -no-openssl -no-cups -no-glib -no-dbus -no-xcb -no-xcursor -no-xfixes -no-xrandr -no-xrender -no-separate-debug-info -no-fontconfig -nomake examples -nomake tools -nomake tests -no-iconv -tslib -I/home/liuxu/tslib/arm-tslib/include -L/home/liuxu/tslib/arm-tslib/lib

This is the Qt Open Source Edition.

You are licensed to use this software under the terms of
the Lesser GNU General Public License (LGPL) versions 2.1.
You are also licensed to use this software under the terms of
the GNU Lesser General Public License (LGPL) versions 3.

You have already accepted the terms of the Open Source license.

Creating qmake...
.Done.
Running configuration tests...
Failed to process makespec for platform 'linux-arm-gnueabi-g++'
Turn on verbose messaging (-v) to see the final report.

请问有没有大神知道如何解决Failed to process makespec for platform 'linux-arm-gnueabi-g++'这个问题啊

这是qmake.conf

这是输出结果

878923596

你的问题我还没有遇到，现在遇到了一个这个报错搜也搜不到 ERROR: Unknown command line option '-no-xcursor'.

潮汐使者

Failed to process makespec for platform 'linux-arm-gnueabi-g++'
你qmake里少了QMAKE_INCDIR += /home/alientek/tslib/arm-tslib/include
QMAKE_LIBDIR += /home/alientek/tslib/arm-tslib/lib
具体路径改一下自己的tslib的路径

langren429

兄弟，你的问题解决了吗？我遇到跟你一模一样的问题