EMWIN在vs2015仿真出错（平台集已改）

romji

最近学emwin发现我的vs2015编译仿真文件一直出错，在网上找了好多资料，什么改平台集啊。还有忽略库啊都试过了
报错显示无法打开libcmt.lib，好呗，那我就手动添加呗。结果又提示什么x64与目标x86冲突，网上查了下，改了个x64的编译环境，这下总好了吧，结果，卧槽，跳出来700多个错。现在真不知道该怎么办了，有木有哪位大大支支招。

augustedward

按照这个配置就能运行成功了 Change the Project properties:  1. Right-Click on the Project (e.g. SimulationTrial) -> Properties 2  Set Configuration to "All Configurations" 3. Goto Configuration Properties -> Linker -> Input. 4. Set Ignore All Default Libraries: "No" 5. Set Ignore Specific Default Libraries: "LIBC.lib;LIBCMTD.lib" 6. Goto Configuration Properties -> Linker -> Advanced 7. Set Image Has Safe Exception Handlers:"No (/SAFESEH:NO)" 8. Click "OK"-Button.

augustedward

augustedward 发表于 2017-7-7 15:05
按照这个配置就能运行成功了 Change the Project properties:  1. Right-Click on the Project (e.g. Simul ...

按照这个配置就能运行成功了
Change the Project properties:

1. Right-Click on the Project (e.g. SimulationTrial) -> Properties
2  Set Configuration to "All Configurations"
3. Goto Configuration Properties -> Linker -> Input.
4. Set Ignore All Default Libraries: "No"
5. Set Ignore Specific Default Libraries: "LIBC.lib;LIBCMTD.lib"
6. Goto Configuration Properties -> Linker -> Advanced
7. Set Image Has Safe Exception Handlers:"No (/SAFESEH:NO)"
8. Click "OK"-Button.

romji

augustedward 发表于 2017-7-7 15:05
按照这个配置就能运行成功了
Change the Project properties:

这个我是试过了 提示打不开libcmt.lib

augustedward

romji 发表于 2017-7-7 15:40
这个我是试过了 提示打不开libcmt.lib

那就不知道了，我就是按这个改的，改完后就OK了