##version##1119##1.119##2026.5.9##
##info##
1. Added project comparison function
2. Added function to restore the last acquisition record when the software crashes
3. Added function to start acquisition from the file page (files acquired by the same type of device are required)
4. Added tag edge movement function
5. Added tag addition by time position
6. Added tag jump function by time
7. Added waveform height adjustment
8. Support for multi-finger touchpad operation
9. Added native Apple (arm64) support on Mac
10. Fixed the crash issue of 32-bit host computer protocol parsing
11. Optimized the abnormal tag binding issue in protocol parsing range
12. Fixed the abnormal multi-device connection issue when multiple instances are running
13. Added error frame detection and parsing support to the CAN protocol
14. I2C and I2C-Fast protocols: 
Optimized the data filtering processing function for invalid waveforms; 
fixed the byte mismatch issue in data analysis and display; 
enhanced the logic for handling and judging error frames;
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1118##1.118##2026.3.5##
##info##
1. Fix the issue where the protocol cannot be loaded due to burrs in the filter.
2. Resolve the problem where the tag distance function is not synchronized.
3. Address the issue where data deletion does not automatically decode.
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1117##1.117##2026.1.16##
##info##
1.Add tag search function
2.Add data deletion function (right-click tag header)
3.Add optional auto-decoding function (no auto-decoding after data changes if disabled)
4.Add quick channel show/hide function (right-click channel button to select start & end channels)
5.Fix crash issue under large protocol data volume
6.Fix freeze issue when deleting protocol
7.Fix decoding exception in stream mode
8.Fix abnormal memory file occupancy in RLE mode
9.Fix abnormal protocol decoding position during synchronous movement
10.Fix WAV sampling rate exception in I2S protocol
11.Fix default length exception of SDIO protocol data acquisition
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1116##1.116##2025.12.4##
##info##
1. Disable scientific notation display
2. Fix the issue of abnormal channels in the pop-up window for adding measurements (based on tags)
3. Fix the problem of abnormal data in scroll mode when caching data to the hard disk
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1115##1.115##2025.11.8##
##info##
1. Fixed the issue of abnormal waveform display values
2. Fixed the issue of abnormal lag when decoding long text in the protocol
3. Fix the abnormal problem of the burr filter channel
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1114##1.114##2025.9.23##
##info##
1. Fixed an issue where the Esc key caused a black screen.
2. Fixed an issue where protocols could not be exported.
3. Fixed an issue where data filtering would be reset after reacquisition.
4. Fixed an issue where waveform display values ​​were abnormal.
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1113##1.113##2025.9.19##
##info##
1. Fixed an issue where dragging the measurement slider to the end of the data caused calculation anomalies.
2. Optimized automatic saving to the same file when opening and saving files.
3. Fixed an issue where the decoder would not load when opening a file.
4. Fixed an issue where protocol decoding would freeze after acquisition.
5. Fixed an issue where the mouse cursor displayed the measurement window in an unusual position.
6. Fixed an issue where protocol data was duplicated.
7. Added multiple shortcut keys.
8. Added waveform time display.
9. Added range export to CSV.
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1112##1.112##2025.8.1##
##info##
Note: Upgrading will overwrite the built-in protocol, please back up the custom protocol file!
1. Fixed an issue where the disk cache function was not used when loading projects.
2. Fixed a crash during secondary capture in scroll mode.
3. Added a global zoom factor to the settings window.
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1111##1.111##2025.7.24##
##info##
Note: Upgrading will overwrite the built-in protocol, please back up the custom protocol file!
1. Added hard disk cache data acquisition function
2. Protocol parsing text memory usage optimization
3. Added waveform interface mobile shortcut keys
4. Protocol added fast parsing version: UART-Fast, SPI-Fast, I2C-Fast
5. Added support for protocol output data points on the waveform (UART, SPI, I2C, UART-Fast, SPI-Fast, I2C-Fast)
6. Optimized the display mode of long protocol text (follow the waveform scroll after zooming in)
7. Protocol output data multi-base conversion supports:
ADB, AM230X, AUD , CAN, SPI, rgb_led_ws281x, MIPI_DSI, swd, avr_pdi, carrera, mido, dali, onewire_network, opentherm, ps2, qspi, sda2506, sipi, t55xx

Protocol optimization:
1. SPI: transfers text optimization (matching base)
2. USB-PD: fix data parsing error bug, add support for some extended data
3. spi_dual_quad: parsing optimization
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1110##1.110##2025.4.30##
##info##
Note: DL16 needs to upgrade the latest firmware
1. Fixed the problem of parsing protocol freezing
2. Fixed the problem of binary search data search position error
3. Fixed the abnormal problem of saving and importing special character files
4. Added the function of pinning to the top
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1109##1.109##2025.4.28##
##info##
Note: DL16 needs to upgrade the latest firmware
1. Fixed the problem that the old version of DL16 cannot upgrade the firmware
2. Optimized the waveform scroll bar button logic to fine-tune the step
3. Fixed the problem that the file name containing special symbols cannot be opened or saved
4. Fixed the problem of possible crash when reconnecting
5. Fixed the problem of occasional crash in protocol decoding
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1108##1.108##2025.4.16##
##info##
1.DL16 supports scroll acquisition mode (Device needs to be updated with the latest firmware)
2. Fixed the hidden taskbar issue that could not be brought up when software was maximized
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1107##1.107##2025.3.21##
##info##
1. Added read-write cache path modification function
2. Added parameter measurement (based on label) function
3. Added the function of deleting all parameter measurements under a channel (right-click the channel label)
4. Added the function of importing project data for a single channel (right-click the channel label)
5. Added the default save method to select overwrite or save as another option
6. Fixed the abnormal channel name recording problem
7. Fixed the abnormal parameter measurement value after opening the project
8. Fixed the parameter measurement synchronization problem after burr filtering
9. Optimized the cross-channel measurement judgment range
10. Fixed the problem of dragging label association calculation not being executed
11. Fixed the problem of not being able to prompt when saving the file when it is needed
12. Fixed the SENT protocol abnormality
13. Fixed the problem of channel sequence not being recorded
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1106##1.106##2025.3.18##
##info##
1. Fixed the problem of abnormal collection caused by uploading collected data in DL32
2. Added the function of adjusting the width of channel information area
3. Added the function of customizing the protocol name
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1106##1.106##2025.3.18##
##info##
1. Fixed the problem of abnormal collection caused by uploading collected data in DL32
2. Added the function of adjusting the width of channel information area
3. Added the function of customizing the protocol name
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1105##1.105##2025.3.11##
##info##
1. Added trigger tag moving function
2. Added tag synchronization function
3. Added custom waveform measurement display mode (Settings window->Style)
4. Added path memory function
5. Added window title to display file name
6. Added protocol data to support multi-line selection and copying of data
7. Optimized the unit precision of time tag display
8. Optimized the memory capacity monitoring mechanism under Linux
9. Fixed the problem that tags are abnormally disabled in certain situations
10. Fixed the crash problem of collecting again after reloading the protocol library
11. Fixed the problem that the search function input box cannot be input by keyboard
12. Fixed the crash problem of creating a new protocol after reloading the protocol library
13. Fixed the abnormal data time problem of CSV export
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1104##1.104##2025.1.22##
##info##
1. Added the function of displaying simple/advanced trigger mode text during acquisition
2. Added the function of hiding start and stop bits in uart protocol
3. Added a pop-up window for double confirmation of all measurement and label deletion
4. Fixed the problem that the Del key would delete labels when entering notes for measurement
5. Fixed the problem of file import failure
6. Added advanced syntax|| for protocol data search
7. Fixed the problem of missing export project parameters causing abnormal csv export time
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1103##1.103##2024.12.03##
##info##
1. Optimize the abnormal text display problem under 4K resolution
2. Support system 125% magnification
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1102##1.102##2024.11.21##
##info##
1. Fixed the problem that DL16 cannot collect data under Linux
2. Fixed the abnormal font problem under MAC
3. Added support for setting to turn off the 4K resolution adaptive function
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1101##1.101##2024.11.13##
##info##
1. Fixed the problem of abnormal collection crash in RLE mode of DL32 low-profile version
2. Fixed the problem that mac cannot connect to DL16
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1100##1.100##2024.11.09##
##info##
1. Support DL32 series devices
2. Added protocol binary decoding (old projects need to delete the decoder and then decode again)
3. Added rolling acquisition mode (currently only supports DL32 series)
4. Added parallel and serial trigger functions (currently only supports DL32 series)
5. Added the function of uploading collected data when Buffer mode stops (currently only supports DL32 series)
6. Display units are accurate to picoseconds
7. Protocol i2c supports packet output
8. USB pd protocol supports revision 3.2 extended data
9. PWM protocol supports frequency output
10. Optimize uart protocol parsing speed, support sample output, and automatically encapsulate according to intervals
11. Optimize interface text display
12. Optimize display freeze problem
13. Parameter measurement adds measurement "maximum positive pulse width", "minimum positive pulse width", "maximum negative pulse width", "minimum negative pulse width"
14. Optimize the import speed of large file projects
15. Support touch screen to control waveform interface
16. Fix known bugs
17. Optimize protocol "sdcard_spi; cec"
18. Newly supported protocols: "pn532; ccd; iebus; avclan; ps2_keyboard; ps2_mouse; spi_dual_quad; tpm_fifo_tis; tpm_tis_i2c; tpm_tis_spi; spacewire; adat; nrzi; 4b5b; udp; ethernet; ipv4; arp; scs; sdio"
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##

##version##1067##1.067##2024.7.17##
##info##
1.Fixed the problem that the updated software cannot be upgraded abroad
2.Added memory overflow judgment conditions
3.Fixed the problem that the protocol is occasionally not loaded when opening the project
4.Added support for updating text in multiple languages
5.Added the function of exporting CSV data according to the enabled channel
6.Added the function of selecting the upper layer protocol in the protocol editing interface
##
##url##
http://www.openedv.com/docs/tool/luojifenxiyi/DL16.html
##urlend##